Specifications

41
Dotco Drill Specifi cations
Model Number
Speed
Drill Diameter
(Capacity)
Type
(Housing)
Weight Length Head Height
Drill Chuck
Size
Air Inlet
NPT
rpm kg mm mm
Series 15LF straight - (300 Watt)
15LF081-38+ 5300 1/4" C 0.6 203 --- 1/4" 1/4"
15LF082-38+ 4000 1/4" C 0.6 203 --- 1/4" 1/4"
15LF083-38+ 3300 1/4" C 0.6 203 --- 1/4" 1/4"
15LF087-38+ 600 1/4" C 0.9 236 --- 1/4" 1/4"
Series 15-14 right angle - (220 Watt)
15L1489-38 3600* 1/4" C 0.7 203 76 1/4" 1/4"
15L1488-38 2400* 1/4" C 0.7 203 76 1/4" 1/4"
Housing identifi er: A = Aluminium, C = Composite, S = Steel
*Idler gear
+Model available without chuck, replace termination number -38 with -40.
GENERAL
Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube.
Minimum hose inside diameter
Series 15LF, 15-14: 1/4" (6.4 mm)
Series 15-29: 5/16" (7.9 mm)
STANDARD EQUIPMENT
Jacobs drill chuck (with thread), chuck key, additional grip
(all straight models with keyed type chuck larger than 1/4")
OPTIONAL
Exhaust hose (rear exhaust): See catalogue SP-102
Additional grip: 539602
Model Number Speed
Drill Diameter
(Capacity)
Weight** Length**
Drill Chuck
Size
Air Inlet
NPT
With Drill Chuck
3/8"-24 Male
Thread
rpm kg mm
Series 14CF - (300 Watt) - non-reversible
14CFS90-38 29000 1/4" 0.68 145 1/4" 1/4"
14CFS91-38 5200 1/4" 0.68 145 1/4" 1/4"
14CFS92-38 3800 1/4" 0.68 145 1/4" 1/4"
14CFS93-38 3200 1/4" 0.68 145 1/4" 1/4"
14CFS94-38 2400 1/4" 0.72 145 1/4" 1/4"
14CFS95-38 1000 1/4" 0.82 175 1/4" 1/4"
14CFS96-38 700 1/4" 0.82 175 1/4" 1/4"
14CFS97-38 600 1/4" 0.82 175 1/4" 1/4"
Series 14CN - (450 Watt) - non-reversible
14CSL90-38 14CSL90-40 20000 1/4" 0.95 160 1/4" 1/4"
14CSL98-38 14CSL98-40 6000 1/4" 0.95 160 1/4" 1/4"
14CSL91-38 14CSL91-40 5200 1/4" 0.95 160 1/4" 1/4"
14CSL92-38 14CSL92-40 3200 1/4" 0.95 160 1/4" 1/4"
14CSL95-51 14CSL95-40 1300 3/8" 1.31 205 3/8" 1/4"
14CSL97-51 14CSL97-40 500 3/8" 1.31 205 3/8" 1/4"
Series 14CN - (670 Watt) - non-reversible
14CNL90-38 14CNL90-40 20000 1/4" 1.00 173 1/4" 1/4"
14CNL98-38 14CNL98-40 6000 1/4" 1.00 173 1/4" 1/4"
14CNL91-51 14CNL91-40 5200 3/8" 1.08 183 3/8" 1/4"
14CNL92-51 14CNL92-40 3200 3/8" 1.08 183 3/8" 1/4"
14CNL95-51 14CNL95-40 1300 3/8" 1.27 218 3/8" 1/4"
14CNL97-53 14CNL97-40 500 1/2" 1.59 231 1/2" 1/4"
GENERAL:
See catalogue SP-102 for additional features and advantages.
Air inlet tube: use 1/4" NPT - hoses with 5/16" (7.9 mm) inside diameter.
Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube.
STANDARD EQUIPMENT:
14CF: Jacobs drill chuck (with thread), chuck key
14CS, 14CN: Jacobs drill chuck (with thread), chuck key,
additional grip (all models with keyed type chuck larger than 1/2")
OPTIONAL:
Exhaust hose: See catalogue SP-102