Specifications

37
Dotco Buffer/Polisher Accessories
Spindle Adapters
For use with PSA disc
holders.
Part No.
Adapter Description
Thread (for
Tool Spindle)
Thread (for PSA
Disc Holder)
Max. Disc
Diameter
14-1142 1/4"-28 Male 5 -40 Male 1"
14-1144 1/4"-28 Male 1/4"-20 Male 4"
14-2903 5/8"-11 Male 5/16"-24 Male 4"
14-1212 5/8"-11 Male 1/4"-20 Male 4"
14-1211 5/8"-11 Female 3/8"-24 Male 4"
14-1144
Miniature Drill Chucks
For use with Dotco series 12-12.
For adapting right angle grinders with
threaded spindle to drilling and disc sanding
application (with PSA disc holders) and light
grinding tasks.
Shaft
Diameter
Part No.
Assembly Chuck
1/8" 14-1102* 14-0158**
1/4" 14-1104* 14-0168***
6 mm 14-1094 14-0170***
14-1104
Sanding Disc Cutter
With the aid of a scale, discs with a
diameter of max. 9" can be cut to a diameter of 3" or
4". The double bevel cutting device leaves round cut
edges that do not fray or crumble.
Part No. Description
14-2535 Sanding disc cutter
Replacement Blades
14-2590 Upper blade
14-2591 Lower blade
Wrench
For use with
backing pad nut 14-2118.
Part No. Tool Series
14-2319 5/8"-11 threaded spindle
Nut
For use with Dotco sanders with 5/8"-11
threaded spindle.
Part No. Tool Series
14-2118 5/8"-11 threaded spindle
Backing Pads (Spiralcool)
For Dotco sanders with 5/8"-11 threaded spindles. The contour
of the backing pad produces an airfl ow that cools the disc and
prevents the excessive accumulation of material.
Flexibility
Part No. – Backing Pad Diameter (Max. Rated Speed)
4"
12000 rpm
4 1/2"
11000 rpm
5"
10000 rpm
7"
7000 rpm
9"
6000 rpm
Flexible 14-2197 14-2255 14-2115 14-2529 14-2202
Medium 14-2198 14-2256 14-2116 14-2200 14-2203
Rigid 14-2199 14-2257 14-2117 14-2201
Save-A-Disc Pads
For Dotco sanders with 5/8"-11 threaded
spindle. Ribs on the backing plate
cause a fl exing action that
throws off accumulated material.
14-2517
Diameter
Inch
Part No.
Max. rpm Assembly Pad Only Plate Only Nut Only
5 7500 14-2515 14-2521 14-2522 14-2525
7 7500 14-2517 14-2521 14-2523 14-2525
9 7500 14-2519 14-2521 14-2525
PSA Disc Holders
Chuck:
Fit PSA disc holder
directly in the chuck (1/8" or 1/4").
For Threaded Spindle:
Remove threaded shank from the PSA disc holder. Using the
spindle adapter table, select the correct spindle and fi t to the holder.
Part No.
PSA Disc
Diameter
Shank
Diameter
PSA Disc
Female Thread
14-1146 1/2" 1/8" 5-40 female
14-1105 1/2" 1/4" 5-40 female
14-1147 3/4" 1/8" 5-40 female
14-1107 3/4" 1/4" 5-40 female
14-1170 1" 1/8" 5-40 female
14-1110 1" 1/4" 5-40 female
14-1111 1-1/2" 1/4" 1/4"-20 female
14-1112 2" 1/4" 1/4"-20 female
14-1113 3" 1/4" 1/4"-20 female
14-1114 4" 1/4" 1/4"-20 female
14-1112
* NOTE: For 1/4"-28 female thread**
** NOTE: For 5/16"-24 female thread - 1/8" chuck***
*** NOTE: For 3/8"-24 female thread - 1/4" chuck