Specifications

36
12-10
12-25
12-27
10-27
Dotco Buffers/Polishers
2200 – 6200 rpm
220 Watt – 1270 Watt
■ Numerous tools available to suit
your application requirements
■ Front, side, rear exhaust
Housing identifi er: A = Aluminium, C = Composite, S = Steel
*With speed control
**Overall height
***Also available in 6 mm.
• Low oil blades
GENERAL:
Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube.
Minimum hose inside diameter
Series 12-10: 1/4" (6.4 mm)
Series 12-25, 12-27, 10-27: 5/16" (7.9 mm)
Series 12-42: 1/2" (12.7 mm)
STANDARD EQUIPMENT:
Series 12-10, 12-25: Corresponding collet chuck and chuck wrench
Series 10-27, 12-27: Spindle wrench
Series 12-42: Nut, washer, spacer ring and wrench
OPTIONAL:
Chucks: See catalogue SP-102
Exhaust hose (rear exhaust): See catalogue SP-102
Additional grip series 12-10: 6188
Additional grip series 12-25: 8088
Model Number Speed
Abrasive
Capacity
Type
(Housing)
Weight Length Height**
Clamping
Range mm***
Air Inlet
NPT
Front Exhaust Side Exhaust Rear Exhaust rpm
Buffi ng
Brush
Polishing
Wheel
kg mm mm
Series 12-10 - (220 Watt) - chuck series 200
12L1093-01 5000 3" 3" C 0.7 183 5.6 - 6.4 1/4"
12L1092-01 3200 3" 3" C 0.7 183 5.6 - 6.4 1/4"
Series 12-25 - (670 Watt) - chuck series 200
12L2594-01 6200 4" 6" C 0.9 236 5.6 - 6.4 1/4"
12L2593-01 4700 4" 6" C 0.9 236 5.6 - 6.4 1/4"
12L2592-01 3200 4" 6" C 0.9 236 5.6 - 6.4 1/4"
Series 12-27 & 10-27 - (670 Watt) - 5/8"-11 threaded spindle
12L2762-80• 4500* 4" 6" C 1.5 267 98 5/8" - 11 1/4"
12L2760-80• 3300* 4" 6" C 1.5 267 98 5/8" - 11 1/4"
12L2760-80 3300* 4" 6" A 1.8 236 98 5/8" - 11 1/4"
Series 12-42 - (1270 Watt) - 5/8"-11 male threaded spindle
12L4203-80• 3400 4" 8" C 2.9 346 98 5/8" - 11 1/2"