Specifications

35
Dotco Belt Sander Specifi cations
Housing identifi er: A = Aluminium, C = Composite, S = Steel
• Low oil blades
GENERAL:
Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube.
Minimum hose inside diameter 1/4" (6.4 mm)
STANDARD EQUIPMENT:
Series 12-12, 12-13: Sanding belt with 80 grit and 120 grit or a
medium grit, non-woven belt, corresponding wrenches, lube gun
and gear lubricant
Series 12-23: Tool and contact arm, adjusting wrench
OPTIONAL:
Replace the "S" in the model number with "L" if you need a safety lever.
Exhaust hose (rear exhaust): See catalogue SP-102
Output drives: See catalogue SP-102
Sanding belts: See catalogue SP-102
*Optional terminations for series 12-12 & 12-13
(All models may not be available):
-32 B x 1/4" 28 female thread; -36 B x 1/4" chuck
EQUIPMENT:
1 x tool with 3/4" wide, straight arm
2 x additional arms
1 x 1/2" wide, straight arm
1 x offset arm
3 x 1/4" x 18" aluminium oxide belts
1 x 60 grit
1 x 80 grit
1 x 120 grit
3 x 1/2" x 18" aluminium oxide belts
1 x 60 grit
1 x 80 grit
1 x 120 grit
2 x 3/4" x 18" aluminium oxide belts
1 x 60 grit
1 x 80 grit
1 x 3/4" x 18" medium non-woven belt
Wrenches & other parts
1 x 3/4" open end wrench (adjustable)
1 x 9/16" open end wrench (adjustable)
1 x 9/64" hex wrench
1 x 3/16" hex wrench
1 x 1/4" wrench
1 x wrench attachment
1 x chuck body
1 x carrying case with foam inserts
Dotco Kit 12L2384-K1
On ordering the Dotco kit 12L2384-K1 you will receive the
tool and three interchangeable arms, belts and wrenches.
With the Dotco kit 12L2384-K1 you are ready for practically
any fi nishing project!
Model Number Speed
Belt Capacity
Type
(Housing)
Contact
Arm
Weight Length
Air Inlet
NPT
Front Exhaust Rear Exhaust rpm kg mm
Series 12-12* - (220 Watt) - sanding belt
12L1281-36B2 20000 1/2" wide x 12" long sanding belt C Straight 0.6 287 1/4"
12L1280-36B2 12000 1/2" wide x 12" long sanding belt C Straight 0.6 287 1/4"
Series 12-13* - (220 Watt) - gearless - sanding belt
12L1382-
36B2•
20000 1/2" wide x 12" long sanding belt C Straight 0.6 287 1/4"
12L1382-
36B4•
20000 1" wide x 12" long sanding belt C Straight 0.8 287 1/4"
Series 12-23 - (380 Watt) - gearless - woven or non-woven belt
12L2384-B1 20000
5/8" or 3/4" wide x
18" long belt
C Straight 1.1 381 1/4"
12L2384-K1
(Kit)
20000 (For details see below) C
Straight/
offset
1.1 381 1/4"