Specifications
31
Dotco Inline Extended Grinder Specifi cations
Housing identifi er: A = Aluminium, C = Composite, S = Steel
▲ Trigger start available
*With speed control
**Also available in 6 mm.
• Low oil blades
Mounting capacity for grinding wheels depends on wheel diameter, thickness and over-
hang. You can obtain speed recommendations from the wheel manufacturer.
GENERAL:
Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube.
Minimum hose inside diameter:
Series 10-11, 12-11: 1/4" (4.8 mm)
Series 12-26, 136: 5/16" (7.9 mm)
Series 15 (speed control): 3/8" (9.5 mm)
STANDARD EQUIPMENT:
Corresponding collet chuck, chuck wrench
OPTIONAL:
Additional accessories: See catalogue SP-102
Exhaust hose (rear exhaust): See catalogue SP-102
MULTIPLE EXTENSIONS FOR SERIES 12-26:
Each extension changes the total length and the weight of the tool as follows:
Series 12-26 = 7.25" (184 mm) and 1.2 lbs. (0.54 kg).
The length and weight information in the table apply for model 2A.
1A = One extension
2A = Two extensions
3A = Three extensions etc.
Extensions are not available for all speeds.
Model Number Speed
Abrasive Capacity
Type
(Housing)
Weight Length
Clamping
Range mm**
Air Inlet
NPT
Front Exhaust Side Exhaust Rear Exhaust rpm kg mm
Series 12-11 - (220 Watt) - 3" (76 mm) extension - chuck series 300
12L1101-36 12L1181-36 28000
1/2" carbide bur,
1" grinding wheel
C 0.6 277 5.6 - 6.4 1/4"
12L1112-36• 25000
1/2" carbide bur,
1" grinding wheel
C 0.6 277 5.6 - 6.4 1/4"
Series 10-11 - (220 Watt) - 5" (127 mm) extension - chuck series 300
10L1101-36 10L1181-36 28000
1/2" carbide bur,
1" grinding wheel
A 0.5 248 5.6 - 6.4 1/4"
10L1112-36▲ 25000
1/2" carbide bur,
1" grinding wheel
A 0.5 248 5.6 - 6.4 1/4"
Series 12-26 - (670 Watt) - 5" (127 mm) extension - chuck series 200
12L2600-01 22000
1" carbide bur,
1 1/2" grinding wheel
C 1.3 328 5.6 - 6.4 1/4"
12L2682-01• 18000
1" carbide bur,
1 1/2" grinding wheel
C 1.3 328 5.6 - 6.4 1/4"
Series 12-26 - (670 Watt) - multiple extensions - chuck series 300
12S2674-2A• 18000
3/4" carbide bur,
1 1/2" grinding wheel
C 1.9 597 5.6 - 6.4 1/4"
12-11