Specifications

130
Cordless Crowfoot Nutrunners With Transducer
47BCYSB30C1
29 mm
17 mm
16 mm
32 mm
76 mm
4 mm
38 mm
51 mm
19 mm
35 mm dia.
39 mm dia.
29 mm
32 mm
16 mm
76 mm
4 mm
38 mm
49 mm
35 mm dia.
39 mm dia.
19 mm
C3 – 30° head (order no. 301072)
Maximum recommended torque: 30 Nm
C1 – 15° head (order no. 301071)
Maximum recommended torque: 30 Nm
Crowfoot Series
Torque range Bolt size
10.5 - 30 Nm M6 - M8
■ Brushless precision motor
■ High-resolution resolver
■ Exact torque measurement by transducer
■ Integrated electronic intelligence with power management
and I/O signal processing
■ Integrated servo
Crowfoot Nutrunner
Torque Range
Free Speed (rpm)
Weight Without Battery
Output Drive
Size
Length with Battery
Batteries PM48 26 V 44 V
Order No. Nm
26 V* 44 V* 48 V
kg mm mm
47BCYSB30C1
10.5-30 186 326 326
2.81 15 667 648
47BCYSB30C3
10.5-30
186 326 326 2.81 15 660 641
* Free speed with fully charged battery.
General: All tools must be used with a suitable Cleco/DGDnutrunner controller or
PC software solution.
Weight of the batteries 26-V Li-ion battery 0.50 kg, 44V Li-ion battery 0.85 kg
Optional accessories:Batteries and battery chargers are not included the standard
equipment. You will find all accessories on pages 133 and 134 of this catalogue.
For special versions of sockets, please use the prefix "CS" (e.g.: CSEE01 for 1/2", flush, thru hex)
Head
CS – Crowfoot
Data Transfer
Y – WLAN: Dual band 2.4 GHz, 5 GHz
Z – Xbee: IEEE 802.15.4 (4 tools per access point)
Options
S – Barcode
scanner
– None
Motor
47
Tool Version
C – Crowfoot nutrunner
Supply
B - Batt./PM48
Type of Output Drive
1 – Thu hex
Extensions
0 – Flush 4 – 1/2" 6 – 3/4"
Socket Sizes
EA - 1/4" MA – 7 mm MF – 12 mm
EC – 3/8 MB – 8 mm (5/16) MG – 13 mm
EE – 1/2 MC – 9 mm MH – 14 mm
EF – 9/16 MD – 10 mm MI – 15 mm
ME – 11 mm (7/16)
Socket identifierCrowfoot nutrunner nomenclature
Head Version
C1 - 15°
C3 - 30°
Input Voltage
B – 26V-48V
CS XX X X47 B C X X B XX