Specifications

115
Cleco Current Control Inline Nutrunners
Inline Series
Torque range Bolt size
2 - 150 Nm M5 - M14
18CSE06Q48CSE25D3
Tool Type
S – Inline
Current
Control
XX C S E XXX XXX X
Locking
Pin locking
B - Ball locking
Output Drive
Q - Quick-change chuck
D2 - 1/4" sq. dr.
D3 - 3/8" sq. dr.
D4 - 1/2" sq. dr.
Connector
E - Air-LB
Motor
18, 48
Max. Torque (Nm)
Under 60 Nm, rounded up to next 1 Nm.
Above 60 Nm, rounded up to next 5 Nm.
Model Number
Torque Range Speed Weight*
Output Drive
Length Side to Centre
Nm rpm kg mm mm
18CSE06Q 2 - 6 4000 1.1 1/4" QC 312 23
18CSE06D2 2 - 6 4000 1.1 1/4" 300 23
18CSE12Q 3 - 12 1820 1.2 1/4" QC 330 23
18CSE12D3 3 - 12 1820 1.2 3/8" 315 23
18CSE17Q 4 - 17 1290 1.2 1/4" QC 330 23
18CSE17D3 4 - 17 1290 1.2 3/8" 315 23
18CSE22D3 5 - 22 985 1.2 3/8" 315 23
18CSE31D3 7 - 31 695 1.2 3/8" 315 23
48CSE12Q 3 - 12 4000 1.4 1/4" QC 343 23
48CSE12D2 3 - 12 4000 1.4 1/4" 330 23
48CSE25D3 6 - 25 1820 1.5 3/8" 345 23
48CSE36D3 8 - 36 1290 1.5 3/8" 345 23
48CSE48D3 10 - 48 985 1.5 3/8" 351 23
48CSE65D4 13 - 65 750 2.4 1/2" 420 29
48CES90D4 19 - 90 510 2.5 1/2" 435 29
48CSE125D4 26 - 125 360 2.5 1/2" 435 29
48CSE150D4 31 - 150 240 2.5 1/2" 435 29
*Weights do not include tool cable or reaction bar.
GENERAL:
All tools must be used with Apex Tool Group approved cables and controllers.
STANDARD EQUIPMENT:
Air-LB connector, additional handle with 18CSE12Q and 18CSE12D3. Reaction bar
included with inline tools with torque 17 - 150 Nm.
Ball locking optional
OPTIONAL:
Mounting plates: 543231 (all except those listed below)
543235 - 18ES06Q/D2, 48ES12Q/D2
49087108 - 48ES65D4, 48ES90D4, 48ES125D4, 48ES150D4
Additional accessories: See catalogue SP-1020.