Specifications
112
Cleco Corded Right Angle Floating Spindle Nutrunners with Transducer
48EAE135S461
Max. Torque (Nm)
S1 head – 16, 23 or 30 Nm
S2 head – 37 or 52 Nm
S3 head – 53, 75, 95 or 110 Nm
S4 head – 135 or 230 Nm (48 Series)
S4 head – 150, 185, 210, 235
or 255 Nm (67 Series)
Tool Termination
S1 Sliding (fl oating) spindle
S2 Sliding (fl oating) spindle
S3 Sliding (fl oating) spindle
S4 Sliding (fl oating) spindle
Motor
18
48
67
Connector
- Air-LB
Tool Type
A – Right angle
Electric
XX E A X XXX XX X X
Extension
1 –1.13" (S1), 1.00" (S2 & S3), 1.25" (S4)
2 –2.13" (S1), 3.00" (S2), 2.5" (S4 1/2")
5 –5.13" (S2), 4.25" (S4)
6 – 6.0" (S4 1/2"), 7.0" (S4 3/4")
11 – 11.0" (S4 3/4")
Sq. Dr.
3 – 3/8" (S1, S2)
4 – 1/2" (S3, S4)
6 – 3/4" (S4)
Right angle series with fl oating spindle nomenclature
Right Angle Series with Floating Spindle
Torque range Bolt size
5.1 - 255 Nm M7 - M18
Model
Number
Torque Range Speed Weight*
Output
Drive
Length Side to Centre
Nm rpm kg mm mm
18EAE16S131 5.1 - 16 1225 2.00 3/8" 406 14
18EAE23S131 7.2 - 23 860 2.00 3/8" 406 14
18EAE30S131 6.0 - 30 655 2.00 3/8" 406 14
48EAE37S231 8.0 - 37 1225 2.43 3/8" 474 17
48EAE52S231 11 - 52 860 2.43 3/8" 474 17
48EAE53S341 11 - 53 850 2.74 1/2" 509 22
48EAE75S341 15 - 75 600 2.74 1/2" 509 22
48EAE95S341 20 - 95 460 3.38 1/2" 521 22
48EAE110S341 23 - 110 400 3.38 1/2" 521 22
48EAE135S461 28 - 135 270 4.03 3/4" 522 27
48EAE230S461 47 - 230 150 4.79 3/4" 563 27
67EA150S461 30 - 150 210 5.90 3/4" 655 26
67EA185S461 37 - 185 170 5.90 3/4" 655 26
67EA210S461 42 - 210 155 5.90 3/4" 655 26
67EA235S461 46 - 230 135 5.90 3/4" 655 26
67EA255S461 55 - 255 115 5.90 3/4" 655 26
*Weights do not include tool cable or mounting plate.
NOTE: All 67 Series tools require an isolating transformer (544185PT) for operation with a
Cleco Global Controller
GENERAL:
All tools must be used with Apex Tool Group approved cables and controllers.
STANDARD EQUIPMENT:
18-/48 tools: Air-LB connector, mounting plate.
Tool available with matrix connector on request.
67 tools: Matrix connector, mounting plate.
OPTIONAL:
Additional accessories: See catalogue SP-1020.