Specifications
Mounting plates, dimensions
Spindle float: .69" (17mm)
2.372"
2.375"
PILOT DIA.
1.185"
.281" DIA.
THRU
2 HOLES
1.685"
1.563"
Z4
2.005"
3.010"
1.505"
3/8-24
UNF
TH'D DIA.
3.750"
2.500"
2.499"
PILOT DIA.
Z6
Spindle float: .75" (19mm)
4.000"
4.020"
7/16-20
UNF-2B
TH’D DIA.
5.000"
4.000"
2.000"
2.010"
3.000"
3.010"
2.991"
2.990"
PILOT DIA.
Z8
Spindle float:
1.0" (25mm)
107
Cleco Corded Inline Floating Spindle Nutrunners with Transducer
67ES2060Z8
Motor
67
Tool Type
S – Inline
Electric
67 E S XXXX XX
Output Drive
Z4 – 1/2" sq. dr.
Z6 – 3/4" sq. dr.
Z8 – 1" sq. dr.
Max. Torque (Nm)
Under 60 Nm, rounded up to next 1 Nm.
Above 60 Nm, rounded up to next 5 Nm.
Inline Floating Spindle Series
Torque range Bolt size
13 - 2,060 Nm M6 - M36
Isolating trans-
former 544185PT
Power supply
115/230VAC
Matrix tool cable
542778-XM
Cleco 67 Series
tool
Air-Lb cable
Power
cable
All 67 Series tools require an isolating
transformer (544185PT) for operation
with a Cleco Global Controller.
Model
Number
Torque Range Speed Weight*
Output
Drive
Length Side to Centre
Nm rpm kg mm mm
67ES65BZ4 13 - 64 535 4.9 1/2" 533 33
67ES105BZ4 21 - 104 330 4.9 1/2" 533 33
67ES135BZ4 27 - 135 245 4.9 1/2" 533 33
67ES190Z6 38 - 190 165 7.1 3/4" 559 33
67ES285Z6 57 - 285 115 7.1 3/4" 559 33
67ES385Z6 77 - 386 83 7.1 3/4" 559 33
67ES475Z6 95 - 475 67 7.3 3/4" 569 33
67ES610Z6 122 - 610 50 7.3 3/4" 569 33
67ES850Z8 170 - 848 33 9.1 1" 605 38
67ES1050Z8 210 - 1050 27 9.1 1" 605 38
67ES1670Z8 334 - 1668 17 9.1 1" 605 38
67ES2060Z8 412 - 2060 14 9.1 1" 605 38
*Weights do not include tool cable or reaction bar (if tool equipped with a reaction bar).
NOTE: All 67 series tools require an isolating transformer (544185PT) for operation with a
Cleco Global Controller.
GENERAL:
All tools must be used with Apex Tool Group approved cables and controllers.
STANDARD EQUIPMENT:
Matrix connector, 67 series mounting plate.
OPTIONAL:
Standard tool cable 542778-XX, RA rotating cable 542780-XX,
straight rotating cable 544056-XX, extension cable 542779-XX.
Additional accessories: See catalogue SP-1020.