Specifications

103
Cleco Corded Inline Nutrunners with Transducer
67ES135D4
Inline Series
Torque range Bolt size
13 - 4,050 Nm M10 - M42
Isolating transformer
544185PT
Power
supply
115/230VAC
Matrix tool cable
542778-XM
Cleco 67
Series tool
Air-Lb cable
All 67 Series tools require an isolating
transformer (544185PT) for operation
with a Cleco Global Controller.
Max. Torque (Nm)
Under 60 Nm, rounded up to next 1 Nm.
Above 60 Nm, rounded up to next 5 Nm.
Motor
67
Tool Type
S – Inline
Supply
E - Electrical
XX E S XXXX XXX X
Output Drive
D4 - 1/2" sq. dr.
D6 - 3/4" sq. dr.
D8 - 1" sq. dr.
D12 - 1 1/2" sq. dr.
Locking
Pin locking up to 1/2"
B - Ball locking
Model
Number
Torque Range Speed Weight*
Output Drive
Length Side to Centre
Nm rpm kg mm mm
67ES65D4 13 - 64 535 4.7 1/2" 533 33
67ES105D4 21 - 104 330 4.7 1/2" 533 33
67ES135D4 27 - 135 245 4.7 1/2" 533 33
67ES190D6 38 - 190 165 5.3 3/4" 521 33
67ES285D6 57 - 285 115 5.3 3/4" 521 33
67ES385D6 77 - 386 83 5.3 3/4" 521 33
67ES475D6 95 - 475 67 5.4 3/4" 531 33
67ES610D6 122 - 610 50 5.4 3/4" 531 33
67ES850D8 170 - 848 33 7.7 1" 605 38
67ES1050D8 210 - 1050 27 7.7 1" 605 38
67ES1670D8 334 - 1668 17 7.7 1" 605 38
67ES2060D8 412 - 2060 14 7.7 1" 605 38
67ES4050D12 810 - 4050 6 20.5 1 1/2" 622 60
*Weights do not include tool cable or reaction bar (if tool equipped with a reaction bar).
NOTE: All 67 Series tools require an isolating transformer (544185PT) for operation with
a Cleco Global Controller.
GENERAL:
All tools must be used with Apex Tool Group approved cables and controllers.
STANDARD EQUIPMENT:
Matrix connector, reaction bar, additional reaction bar for 67ES4050D12.
OPTIONAL:
See page 86
Additional accessories: See catalogue SP-1020.
Power
cable