Specifications

101
Cleco Corded Right Angle Nutrunners with Transducer
Right Angle Series
Torque range Bolt size
46 - 2,000 Nm M18 - M36
■ Brushless motor
■ High-resolution resolver
■ Integrated transducer
■ Memory chip with all relevant
tool data
67EA235AL6
Max. Torque (Nm)
Under 60 Nm, rounded up to next 1 Nm.
Above 60 Nm, rounded up to next 5 Nm.
Motor
67
Tool Type
A – Right angle
Supply
E - Electrical
XX E A XXXX XXX X
Output Drive
AL6 – 3/4" sq. dr.
AM6 – 3/4" sq. dr.
ML6 – 3/4" sq. dr.
AH8 – 1" sq. dr.
Locking
Pin locking
Isolating transformer
544185PT
Power supply
115/230VAC
Matrix tool cable
542778-XM
Cleco 67
series tool
Air-Lb cable
Power
cable
All 67 Series tools require an isolating
transformer (544185PT) for operation
with a Cleco Global Controller.
Model
Number
Torque Range Speed Weight*
Output
Drive
Length
Angle Head
Side to Centre Height
Nm rpm kg mm mm mm
67EA235AL6 46 - 230 135 5.9 3/4" 655 26 58
67EA255AL6 55 - 255 115 5.9 3/4" 655 26 58
67EA310ML6 60 - 310 100 9.2 3/4" 739 27 65
67EA340AM6 70 - 335 90 9.5 3/4" 803 35 79
67EA460AM6 95 - 460 66 9.5 3/4" 803 35 79
67EA570AM6 115 - 570 53 9.5 3/4" 803 35 79
67EA860AH8 175 - 860 33 10.3 1" 643 38 237
67EA1035AH8 210 - 1035 25 10.5 1" 668 38 237
67EA1340AH8 270 - 1340 20 10.5 1" 668 38 237
67EA1700AH8 340 - 1700 16 10.5 1" 668 38 237
67EA2010AH8 400 - 2000 13 10.5 1" 668 38 237
*Weights do not include tool cable or reaction bar.
NOTE: All 67 Series tools require an isolating transformer
(544185PT) for operation with a Cleco Global Controller. Contact your regional service
centre for commissioning support.
GENERAL:
All tools must be used with Apex Tool Group approved cables and
controllers.
STANDARD EQUIPMENT:
Matrix connector
OPTIONAL:
Standard tool cable 542778-XX, RA rotating cable 542780-XX,
straight rotating cable 544056-XX, extension cable 542779-XX.
Additional accessories: See catalogue SP-1020.