Specifications

ManualsBrandsCooper Tools ManualsPower ToolsAireTool CC-325-HP

Industrial Tools for Professional Users

Extract from the full catalogues

Power Tools

Summary of content (144 pages)

PAGE 1
Power Tools Industrial Tools for Professional Users Extract from the full catalogues
PAGE 2
Table of contents Apex Tool Group – Brief Overview of Power Tools 4 Airetool Airetool Tube Rolling Systems . . . . . . . . . . . . . . . . . . . . . 5 Airetool Heat Exchanger & Condenser Tube Expanders. 6 Airetool Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Airetool Tube Cutters . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Airetool Tube Removal Tools. . . . . . . . . . . . . . . . . . . . . . 11 Cleco Cleco 19 Series . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 3
Contents Section Page Brief Overview of the Power Tool Brands of the Apex Tool Group 4 Airetool Rolling Motors, Tube Expanders, Tube Pullers & Accessories 5 Apex Sockets, Bits, Universal Joints & μ-Guard 12 Dotco Grinders, Polishers, Drills, Venturi X & Accessories 24 Master Power Sanders, Air Vacuums, Drills, Impact Wrenches & Accessories 46 Cleco Pneumatic Assembly Tools & Accessories 60 Cleco Pulse Nutrunners & Accessories 76 Cleco Torque Veriﬁers & Accessories 83 Cleco Balancers 86 C
PAGE 4
Brief Overview Assembly tools and material removal tools. With more than 100 years of experience in precision manufacturing, Cleco is the ﬁrst choice worldwide especially for discerning demands in hand-held assembly tool technologies. Tube cleaner- and tube expander technology as well as rolling motors. Well-known machines and tools in the industry applied for manufacturing and maintenance of heat exchangers, coolers, condensers or vessels. Material removal tools, drills, grinders, polishers.
PAGE 5
Airetool Tube Rolling Systems Model DAS-100-TRS Rolling systems for workbench mounting and for applications with 1/4" to 5/8" tube outside diameter ■ ■ ■ ■ ■ ■ ■ Robust design Trigger start for each cycle Makes it possible to align the expander Absorbs the torque Supports up to 3 kg Increases productivity Lower force application due to ergonomic design ■ Developed for usage with the series 800, 900 and 1300 tube rollers Operation Air cylinders provide the counterweight to the arm.
PAGE 6
Airetool Heat Exchanger & Condenser Tube Expanders Overview Series 900 1/4" (6.3 mm) - 3/8" (9.5 mm) outside diameter Series 1300 3/8" (9.5 mm) outside diameter Series 800 1/2" (12.7 mm) - 1 1/2" (38.1 mm) outside diameter Series 1200 1/2" (12.7 mm) - 1 1/2" (38.1 mm) outside diameter The World Standard for Tube Expanders Airetool heat exchanger and condenser tube expanders have long been recognised as the standard against which all other brands are measured.
PAGE 7
Airetool Heat Exchanger & Condenser Tube Expanders Series G-900 Outside diameter: 1/4" – 3/8" (6.3 – 9.5 mm) ■ Expander with 3/4" (19.0 mm) long rolls, accommodates tube sheet thicknesses from 1/4" to 3/4" (6.3 to 19.0 mm) ■ Expander with 1-1/4" (31.7 mm) long rolls, accommodates tube sheet thicknesses from 3/4" to 1-1/4" (19.0 to 31.7 mm) ■ These expanders accommodate a large range of tube sheet thicknesses. Series G-1300 Outside diameter: 3/8" (9.5 mm) ■ Expander with 3/4" (19.
PAGE 8
Airetool Accessories Cleco® Drills Series 15DP Can be used with Airetool tube end facers and push-type tube cutters. Belling and Flaring Tool Model Number Speed (rpm) Chuck Capacity mm kg 15DP-1.6B 15DP-4B 15DP-8B 15DP-14B 160 400 800 1400 13 13 13 10 0.27 2.5 2.5 2.0 Belling tool: Pilot end ﬁts in tube inside diameter with type 01 retainer. State the tube outside diameter, gauge and radius in tube sheets.
PAGE 9
Airetool Accessories Universal Joints and Extensions Can be used for difﬁcult to access tubes, the universal joint operates smoothly and without binding. State the size of the square drive and the extension length. Overall Length Universal Joints Stock Number Square Drive Size Female 3/8 x 3/8 •1/2 x 1/2 •3/4 x 3/4 2115300 2039800 2974913 3/8" (9.5 mm) 1/2" (12.7 mm) 3/4" (19.
PAGE 10
Airetool Tube Cutters Airetool RCM One Revolution tube cutters are suitable for inch and metric tube sizes. For cutting tubes in heat exchangers, condensers and boilers. Available in standard reaches of 6" (152 mm) and 10" (254 mm), longer reaches are available in 10" (254 mm) steps on request. These tube cutters were developed for manual use in conjunction with a ratchet or a hand wrench.
PAGE 11
Airetool Tube Removal Tools The Manual Tube Puller offers an economical method for tube replacement. ■ Easy to use – to insert the spear into the tube and remove you only need a hand wrench. ■ No power supply required – the manual operation makes compressed air and electrical power unnecessary; for this reason the tube puller is ideal for applications in the ﬁeld. ■ Durable – key components have been manufactured using the highest quality steel and heat treated for an extra long service life.
PAGE 12
Apex Sockets and Bits Quality Fastening Tools For more than half a century Apex has had a leading position among the suppliers of industrial fastening tools. A large number of sockets, socket combinations and other attachments developed by Apex are now industry standards. Quality, service and the selection from Apex offer you unmatched beneﬁts. ■ More Quality for Your Money Apex quality starts with the selection of the raw materials.
PAGE 13
Apex Bit Speciﬁcations and Extensions Bits for all Screw Types For all these fastening types: Phillips® Pozidriv® Square recess Slotted Sel-o-fit® Torq-Set® Torx® Quadrex® MorTorq® Torx Plus® Frearson Tri-Wing® Torx® Tamper Resistant B.N.A.E.
PAGE 14
Apex Bits Phillips Bits 1/4" Hex Insert Bits 1/4" Hex Power Drive Size Part Number Overall Length inch Size mm Part Number 440-1X 440-115X 440-12X 440-125X 440-13X 440-2X 440-2I 440-215X 440-22X 440-225X 440-23X 440-24X 440-255X 440-26X 440-27X* 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 1 1 1/2 2 2 1/2 3 1 1 1 1/2 2 2 1/2 3 4 5 1/2 6 1 25 38 51 64 76 25 25 38 51 64 76 101 140 152 25 For screws not recessed 440-3X 440-3I 440-3125X 440-3BNX 440-32X 440-325X 440-33X 440-34X 440-4X 3 3 3 3 3 3 3 3 4 1 1 1 1/4
PAGE 15
Apex Guide Sleeves and Bits Slotted Power Bits with Guide Sleeves Torx® Bits 1/4" Hex Power Drive Part Number 1/4" Hex Power Drive Part No. Complete Part Number Screw Size Assembly Only Bit L-320X M-320X P-320X R-320X S-320X T-320X 320-LX 320-MX 320-PX 320-RX 320-SX 320-TX Length inch 5F-6R 6F-8R 8F-10R 10F-12R 12F-14R 14F-16R mm 3 3/4 95 3 3/4 95 3 3/4 95 3 3/4 95 3 7/8 98 4 1/8 105 Blade Thickness inch Blade Width/ Shank Dia. mm .036 .91 .038 .97 .0421.07 .0461.17 .0501.27 .0551.
PAGE 16
Apex μ-Guard Product Protection Solutions High Quality Product Protecting Fastening Tools are based on First Class Sockets. Prevents Damage due to Side Impacts Apex μ-Guard™ forms a protective barrier between the genuine Apex fastening tools and the surface of your product. The free-spinning patented sleeve design offers maximum protection for polished and delicate surfaces. Apex μ-Guard™ comprise thermoplastic urethane (TPU elastomer) that softly captures side impacts and prevents expensive damage.
PAGE 17
Apex μ-Guard™ Speciﬁcations μ-Guard Sockets (includes socket and sleeve) Part number Socket UG-10MM21 UG-M-10MM21 UG-MB-10MM21 UG-10MM13 UG-M-10MM13 UG-10MM23 UG-M-10MM23 UG-MB-10MM23 UG-13MM23 UG-M-13MM23 UG-MB-13MM23 UG-13MM25 UG-SF-13MM25 UG-15MM25 UG-SF-15MM25 UG-18MM25 UG-SF-18MM25 10MM21 M-10MM21 MB-10MM21 10MM13 M-10MM13 10MM23 M-10MM23 MB-10MM23 13MM23 M-13MM23 MB-13MM23 13MM25 SF-13MM25 15MM25 SF-15MM25 18MM25 SF-18MM25 Drive End Size Type Sex Socket Length 1/4 1/4 1/4 3/8 3/8 3/8 3/8 3/8 3
PAGE 18
Apex Sockets & Universal Joints ■ Sockets Apex sockets are the industry standard (black version). Available as standard, long, extra long, thin wall in the versions hex, double hex, square, double square, surface drive, fast lead, with ﬁxed or spring-mounted magnet, Torx and various special versions. ■ Magnetic Sockets On tightening conventional or hardened bolts, magnetic sockets ease the access to inaccessible areas. They are often also used in automation.
PAGE 19
Apex Sockets & Universal Joints Universal Joint Adapters, with 3/8" square drive, extension, male square to female square Sockets, Metric with 3/8" square drive, magnetic, thin wall, standard length A C mm B Standard version shown Part Number Standard D Part Number Tension Type Male Square Female Square in. in.
PAGE 20
Apex Sockets Sockets, Metric, with 1/2" square drive, hex and double hex, standard length Part Number Hex Part No.
PAGE 21
Special Tool Request to Fax: +49 7363-81-222 or e-mail: sales@apexpowertools.
PAGE 22
Special Tool Request to Fax: +49 7363-81-222 or e-mail: sales@apexpowertools.eu Request Form for Sockets For information only – not an order FIRST NAME NAME/TITLE COMPANY STREET POSTCODE E-MAIL TELEPHONE Socket Type ■ Type A (conical) CITY FAX Dimensions ■ Type B (cylindrical) ■ Type C (shoulder) A. Square drive B. Diameter of drive end Broach Opening ■ Hex ■ Double square ■ Torx® ■ Double hex ■ Fast lead ■ Other ■ Square ■ Surface drive C. Overall length D.
PAGE 23
Special Tool Request to Fax: +49 7363-81-222 or e-mail: sales@apexpowertools.eu Request Form for Universal Joints* For information only – not an order FIRST NAME NAME/TITLE COMPANY POSTCODE E-MAIL TELEPHONE Dimensions ❏ Female square drive, standard type Size CITY FAX ❏ Female square drive, tension type Size ❏ Male hex drive, tension type Size ❏ Male hex drive, standard type Size *Universal joints are not suitable for usage in combination with impact wrenches. Maximum angle in use 30°.
PAGE 24
Dotco Sanders Overview Performance, Versatility & Quality If precise ﬁnishing work (such as grinding or de-burring) is required, no tool is more suitable than the Dotco® grinder. Dotco's reputation in relation to performance, reliability and versatility is among the best in precision manufacturing. This reputation is the result of years of continuous improvements to the technical design and in production. Dotco grinders are designed for the user.
PAGE 25
Grinding Attachments – Overview Precision Grinders, Carbide Burs and Wheel Grinders For ﬁnishing work during which a high level of robustness is required. Attachments in Conical and Plug Form For general grinding work on soft unalloyed steel, stainless steel, metal alloys and cast steel.
PAGE 26
Dotco Precision Grinders 50000 – 100000 rpm 44 Watt – 74 Watt ■ Different conﬁgurations for all your applications ■ Ideal for precision de-burring and metal removal ■ Turbines and models with and without speed control available ■ 12-03 gearless right angle model for reduced maintenance and downtime 10-95 10-90 12-04 12R91 12-03 10-04 Grinder Kits Air Marking Pen Series 15Z 220G-600-C2-K includes grinder, hose, collet chuck, chuck wrench, cylindrical plain burr (413680), cylindrical radius end burr
PAGE 27
Dotco Precision Grinder Speciﬁcations Model Number With Without Wheel Wrenchless Wheel Guard Guard Chuck Series 10-90 - (44 Watt) - front exhaust - turbine*** 10R9000-03 Speed rpm 100000 10R9000-08 100000 Series 10-95 - (74 Watt) - front exhaust - turbine*** Abrasive Capacity 3/16" carbide bur, 3/16" diamond pin 3/16" diamond pin 1/4" carbide bur, 3/16" diamond pin Series 12R91 without exhaust hose - (74 Watt) - speed control - rear exhaust - turbine*** 1/8" carbide bur, 12R9180-03* 65000** 1/8" diamo
PAGE 28
Dotco Inline Grinders 10-10 12-05 12-10 10-20 12-20 10-25 12000 – 40000 rpm 150 Watt – 670 Watt ■ Housing made of aluminium, composite or robust steel ■ Comprehensive range of different speeds ■ Models with front, side and rear exhaust available 12-25 28
PAGE 29
Dotco Inline Grinder Speciﬁcations Model Number Front Exhaust Side Exhaust Speed Rear Exhaust Series 12-05 - (150 Watt) - with guard 12R0500-36 Series 12-10 - (220 Watt) - chuck series 300 rpm 40000 12L1001-36 12L1081-36+ 34000 12L1000-36 12L1080-36▲+ 30000 12L1003-36• 12L1082-36•+ 25000 12S1008-36• 20000 Abrasive Capacity Type (Housing) Weight Length kg mm Clamping Range mm*** Air Inlet NPT 1/4" carbide bur C 0.3 150 5.6 - 6.4 1/8" C 0.4 152 5.6 - 6.4 1/4" C 0.4 152 5.
PAGE 30
Dotco Inline Extended Grinders 12-11 10-11 12-26 12-26 18000 – 28 000 rpm 220 Watt – 670 Watt ■ Extended housing ■ Housing made of aluminium, composite or robust steel 30
PAGE 31
Dotco Inline Extended Grinder Speciﬁcations Model Number Front Exhaust Side Exhaust Speed Rear Exhaust rpm Abrasive Capacity Series 12-11 - (220 Watt) - 3" (76 mm) extension - chuck series 300 1/2" carbide bur, 12L1101-36 12L1181-36 28000 1" grinding wheel 1/2" carbide bur, 12L1112-36• 25000 1" grinding wheel Series 10-11 - (220 Watt) - 5" (127 mm) extension - chuck series 300 1/2" carbide bur, 10L1101-36 10L1181-36 28000 1" grinding wheel 1/2" carbide bur, 10L1112-36▲ 25000 1" grinding wheel Series 12
PAGE 32
Dotco Right Angle Grinders 6000 – 30000 rpm 220 Watt – 670 Watt 12LF ■ Suitable for numerous ﬁnishing and deburring tasks ■ With and without gear ■ Front, side, rear exhaust ■ Heavy duty heads available for demanding applications ■ Models with extended heads available 10LF 12-13 12-27 12-23 12-22 12-22 Heavy duty head 32 12-27 Heavy duty head
PAGE 33
Dotco Right Angle Grinder Speciﬁcations Model Number Front Exhaust Side Exhaust Speed Rear Exhaust Abrasive Capacity rpm Type (Housing) Weight Head Height* Length kg mm C 0.5 C mm Clamping Range mm** Air Inlet NPT 69 168 5.6 - 6.4 1/4" 0.5 69 168 5.6 - 6.4 1/4" A 0.5 69 168 5.6 - 6.4 1/4" A 0.5 69 168 5.6 - 6.
PAGE 34
Dotco Belt Sanders 12000 – 20000 rpm 220 Watt – 380 Watt ■ Sanding, deburring, removing paint ■ With and without gear ■ Ergonomic housing reduces cold air transmission to the operator ■ Series 12-23 can be used with interchangeable arms 12-12 12-13 12-23 Finishing difﬁcult to access areas Removing paint 34
PAGE 35
Dotco Belt Sander Speciﬁcations Model Number Front Exhaust Rear Exhaust Speed rpm Belt Capacity Series 12-12* - (220 Watt) - sanding belt 12L1281-36B2 20000 1/2" wide x 12" long sanding belt 12L1280-36B2 12000 1/2" wide x 12" long sanding belt Series 12-13* - (220 Watt) - gearless - sanding belt 12L138220000 1/2" wide x 12" long sanding belt 36B2• 12L138220000 1" wide x 12" long sanding belt 36B4• Series 12-23 - (380 Watt) - gearless - woven or non-woven belt 5/8" or 3/4" wide x 12L2384-B1 20000 18" lon
PAGE 36
Dotco Buffers/Polishers 2200 – 6200 rpm 220 Watt – 1270 Watt ■ Numerous tools available to suit your application requirements ■ Front, side, rear exhaust 12-10 12-25 12-27 Model Number Front Exhaust Side Exhaust Speed Rear Exhaust rpm Abrasive Capacity Bufﬁng Polishing Brush Wheel Series 12-10 - (220 Watt) - chuck series 200 12L1093-01 5000 3" 12L1092-01 3200 3" Series 12-25 - (670 Watt) - chuck series 200 12L2594-01 6200 4" 12L2593-01 4700 4" 12L2592-01 3200 4" Series 12-27 & 10-27 - (670 Watt) -
PAGE 37
Dotco Buffer/Polisher Accessories Backing Pads (Spiralcool) For Dotco sanders with 5/8"-11 threaded spindles. The contour of the backing pad produces an airﬂow that cools the disc and prevents the excessive accumulation of material. Flexibility Flexible Medium Rigid Part No. – Backing Pad Diameter (Max.
PAGE 38
Dotco Drills Overview Dotco® drills are used daily in applications ranging from aerospace to oil ﬁelds and reﬁneries. Three styles are available: pistol grip, straight handle (straight drills) and right angle models (right angle drills). Drills in this section have a power of between 0.3 and 0.9 HP. Additional grips are also available for some models. Parts Interchangeability Tool maintenance can be both time-consuming and expensive.
PAGE 39
Dotco Drills - Advantages A Wonder of Technology and Ergonomics We have been able to make these extraordinary improvements thanks to new technology. Prototypes are now available quickly due to our in-house design platform so we can develop models in real time, provide prototypes to users and then further reﬁne the ergonomic and performance criteria with their feedback. The handles for the series 14 are of oval design, as it is this shape that ﬁts the human hand better. The tool lies securely in the hand.
PAGE 40
Dotco Drills 500 – 28500 rpm 220 Watt – 300 Watt ■ Large selection of tools for your application ■ Rear exhaust ■ Some models available with angle head ■ Ergonomically important ﬁnger and thumb guides aid control 15-14 15LF 330 – 2000 rpm 300 Watt – 670 Watt ■ Non-reversible ■ Ergonomically important ﬁnger and thumb guides aid control ■ Excellently suited to aerospace, metal and wood working 14CN 14CS 14CF 40
PAGE 41
Dotco Drill Speciﬁcations Model Number Speed rpm Type (Housing) Weight Length kg mm 1/4" 1/4" 1/4" 1/4" C C C C 0.6 0.6 0.6 0.9 203 203 203 236 --------- 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" C C 0.7 0.
PAGE 42
Dotco Right Angle Drills 320 – 5600 rpm 300 Watt – 670 Watt ■ Impressive range of speeds for your drilling applications ■ Comprehensive range of angle heads 45°, mini 90°, 360°, compact or heavy duty 90° 15LF 15LS 15LN 15LF Optional Angle Heads (NOTE: Not all models are available with all angle heads.) Term. No. Spindle Thread Series 600 miniature angle head - 61 #10-32 female thread - 62 1/4"-28 female thread - 63 9/32"-40 female thread - 64 5/16"-24 female thread Term. No.
PAGE 43
Dotco Right Angle Drill Speciﬁcations Model Number Speed rpm Drill Diameter (Capacity) Type (Housing) Light duty head - series 15LF - (300 Watt) - rear exhaust 15LF281-62 5300 1/4" C 15LF282-62 4000 1/4" C 15LF283-62 3300 1/4" C 15LF284-62 2400 1/4" C 15LF285-62 1000 1/4" C 15LF286-62 750 1/4" C 15LF287-62 600 1/4" C Light duty head - series 15LS - (450 Watt) - rear exhaust 15LS281-62 5430 1/4" C 15LS282-62 3370 1/4" C 15LS283-62 2010 1/4" C 15LS284-62 1660 1/4" C 15LS285-62 1360 1/4" C 15LS286-62 840 1
PAGE 44
Dotco Accessories for Drills Optional Drill Drives For use with Dotco series 15LF, 15LS and 15LN - capacity: 1/4" diameter drill. These drill drives can be ordered separately as accessories or in conjunction with a complete tool. In the case of the order of a complete tool, use the basic model number from the related catalogue page for series 15LF, 15LS and 15LN and replace the termination numbers (e.g. -32) with the termination numbers for the required special drive (e.g. -71). Model Number Term. No.
PAGE 45
Dotco Venturi X - Air Blow Gun and Vacuum System Simple. Versatile. Robust. Powerful Cleaning Up. Dotco tools are known for their durability, reliability and versatility. They are one of the leading brands in the material removal sector. The quality is expressed in the outstanding design combined with excellent technology, as a result the tools are not only small, handy and light, but also robust enough for demanding environments.
PAGE 46
Master Power Sanders Series MP4400 Orbital Sander ■ The low shape gives the operator more control and better comfort during sanding. ■ Consumes less air than comparable tools – ideal for smaller workshops with small compressors, but is also economical in large industrial plants. ■ The low weight and low vibration are advantages of the high-strength polymer material. ■ 3/16" sanding pattern for ﬁne ﬁnishing or 3/32" sanding pattern for high quality ﬁnishing.
PAGE 47
Master Power Sander Speciﬁcations Model Number 3/16" 3/32" Sanding Pad Size 12000 rpm - non-vacuum MP4400-03 3.5 MP4400-05* MP4403-05* 5.0 MP4400-06* MP4403-06 6.0 12000 rpm - central vacuum MP4400-35 MP4403-35HL 5.0 12000 rpm - central vacuum MP4400-15 MP4403-15 5.0 12000 rpm - self generated vacuum, duts bag, hose Speed Weight Height Length rpm kg mm mm 12000 12000 12000 0.71 0.73 0.76 84.58 84.58 84.58 129.79 139.19 139.19 12000 0.75 84.58 179.
PAGE 48
Master Power Sanders Orbital Sander MP4425 ■ 9500 rpm ■ Precise feathering throttle produces a better result ■ Integrated air pressure regulator for maximum operator control ■ Light, but nevertheless durable handle made of composite material ■ Interchangeable handle for operation by right or left-handers 3/16" MP6151 High Speed High Performance Vertical Sander ■ Ideal for deburring, light sanding and rust removal ■ Developed for sanding contours and difﬁcult to access areas ■ Variable speed regulator
PAGE 49
Master Power Air Vacuums Series MP8000, MP8001 & MP8002 Air Vacuums ■ ■ ■ ■ ■ ■ ■ ■ ■ Powerful motor Low noise level Long service life with low maintenance effort. No moving parts. Increased performance and effectiveness due to venturi system Overﬂow valve standard on all units Filtering of very ﬁne particles down to 5 micron Safe, as electricity is not used.
PAGE 50
Master Power Air Vacuum Accessories No. 710032 extension 54", aluminium No. 710006 ﬂoor tool with brush, made of plastic No. 710017 nozzle for cleaning overhead (pipes > 6" diameter) No. 710033 extension with two bends, aluminium No. 710009 ﬂoor tool with brush, made of metal No. 710018 nozzle for cleaning overhead (pipes 4-6" diameter) No. 710034 ﬂoor wand, two-piece, 54", made of metal No. 710025 tool for large quantities, made of plastic No. 710011 ﬂoor tool, made of metal No.
PAGE 51
Master Power Drills MP1454-38 ■ ■ ■ ■ MP1454-38 ■ ■ ■ ■ Motor power 220 Watt Non-reversible Ergonomic design with comfort grip Small size is ideal for difﬁcult to access areas; grip is almost at 90° to the spindle Trigger start for variable speeds Exhaust through the grip Weight 0.
PAGE 52
Master Power Drills MP1463-51 ■ Motor power 750 Watt ■ Reversible ■ Ball bearings on output spindle for high runout accuracy ■ Parts interchangeable with Master Power nutrunners ■ 2-stage trigger start for gentle starting ■ Integrated mufﬂer ■ Hardened, precision ground parts for longer service life ■ 3/8"-24 thread mounting MP1463-51 MP1458-55 ■ Motor power 900 Watt ■ Non-reversible ■ Ball bearings on output spindle for high runout accuracy ■ Parts interchangeable with Master Power nutrunners ■ 2-stage
PAGE 53
Master Power Impact Wrenches Series MP2260 ■ ■ ■ ■ ■ Higher power-weight ratio Speed of a nutrunner, performance of an impact wrench Ideal for soft fastening cases 4 integrated speed settings for variable torques Smooth, efﬁcient impact mechanism prevents torque reaction ■ 100% ball-bearing design ■ Reversible ■ Detachable belt clip (MP2264, MP2265) MP2264 MP2265 MP2266 Model Number Pistol MP2264 MP2265 Straight MP2266 Output Drive Torque Range Speed Bolt Size Weight Air Consumption rpm Impacts
PAGE 54
Master Power Impact Wrenches MP2271 ■ ■ ■ ■ Reversible Full power forward and reverse Unique butterﬂy throttle Integrated 4-stage power regulator MP2271 MP2276 ■ Light, but nevertheless durable composite housing ■ Ergonomic handle for improved operator comfort ■ Integrated 4-stage power regulator ■ Reversible MP2276 Model Number Straight MP2271 Pistol MP2276 Output Drive Torque Range Speed Weight Air Consumption Nm rpm Impacts per Minute Bolt Size in. mm kg m³/min.
PAGE 55
Master Power Impact Wrenches Series MP2290 ■ ■ ■ ■ ■ ■ ■ MP2295 Two hammer anvil for reduced vibration Higher power-weight ratio Integrated 4-stage power regulator 100% ball-bearing motor design Full power forward and reverse Smooth, efﬁcient impact mechanism Reversible MP2294 Model Number MP2294 MP2295 Output Drive Torque Range Speed in.
PAGE 56
Master Power Pencil Grinders MP4200 & MP4201 ■ ■ ■ ■ ■ ■ ■ ■ Ideal for precision de-burring Light, ergonomically designed and vibration-free Exhaust to rear, guide air away from the working area Standard with hose and 1.5 metre supply hose and 0.
PAGE 57
Master Power Die Grinders MP4424 & MP4430 Die Grinders ■ Ideal for general applications such as grinding small welding seams, polishing and deburring sharp edges. ■ Ergonomic handle for operator comfort ■ Integrated centrifugal regulator ■ 360˚ air inlet tube swivel ■ Exhaust to rear, guides air away from the working area ■ 1/4" chuck MP4424 MP4458 ■ ■ ■ ■ MP4430 Robust steel housing Ergonomic design Front exhaust 1/4" chuck - series 200 MP4458 1.
PAGE 58
Cleco 19 Series Precision. Durability. Legendary Reliability. Your productivity is for us the ﬁrst priority. For this reason during the development of the new Cleco 19 series we have successfully combined your experience with our specialist knowledge. The result was the most precise, durable and easiest to use nutrunner family on the market.
PAGE 59
Cleco 19 Series Speciﬁcations Productivity. Model Number 19P Series P I S T O L 19T Series Torque Range Min. Nm Free Speed (rpm) Max. Nm Pistol version with push & trigger start and Clecomatic® clutch 19PCA02Q 19TCA02Q 0.6 2.1 2800 19PCA03Q 19TCA03Q 0.6 2.9 1900 19PCA04Q 19TCA04Q 1.1 4.5 1100 19PCA05Q 19TCA05Q 1.1 5.1 660 19PCA06Q 19TCA06Q 1.1 5.1 260 19PCA07Q 19TCA07Q 1.7 6.8 660 19PCA09Q 19TCA09Q 1.7 8.9 470 Pistol version with trigger start and Clecomatic® clutch 19PTA02Q 19TTA02Q 0.6 2.
PAGE 60
Cleco Pneumatic Inline Nutrunners 2RSA-10SB 2 Series Torque range: 0.06 - 0.9 Nm ■ ■ ■ ■ Push-to-start Push-button reverse Torque adjustment from exterior 1/4" quick-change chuck 19 Series Torque range: 0.6 - 5.1 Nm ■ Push-to-start and lever push-to-start ■ Torque adjustment from exterior ■ 1/4" quick-change chuck ! NEW 19SPA05Q ! NEW 19SCA05Q 8 Series Torque range: 1.7 - 8.5 Nm ■ Push-to-start and lever push-to-start ■ Push-button reverse ■ Quick-change chuck 88RSA-5CQ 88 Series Torque range: 1.
PAGE 61
Cleco Pneumatic Inline Nutrunner Speciﬁcations Torque Range Model Number Tool Length Weight Nm rpm mm kg Air Inlet NPT Min. Hose Inside Diameter Air Consumption m³ / min. 0.06 - 0.9 0.06 - 0.9 0.6 - 2.1 0.6 - 2.1 1.1 - 4.3 1.1 - 4.3 1.1 - 4.3 1000 1000 2300 1600 920 560 220 194 162 230 235 230 240 240 0.20 0.20 0.63 0.64 0.61 0.67 0.68 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 3/16" 3/16" 3/16" 3/16" 3/16" 3/16" 3/16" 0.17 0.17 0.31 0.31 0.31 0.31 0.31 0.6 - 2.1 0.6 - 2.1 1.1 - 4.3 1.1 - 4.3 1.
PAGE 62
Cleco Pneumatic Pistol Grip Nutrunners 88 Series Torque range: 1.7 - 20 Nm ■ Quick-change chuck or square drive ■ Reversible ■ Trigger start and push & trigger start 88RSAPT-5C-3 35 Series Torque range: 1.
PAGE 63
Selecting Your Cleco Nutrunner Cleco offers over 500 different nutrunners of which the majority can be equipped with a wide variety of drive options. As a result there are over 3000 different nutrunner combinations that make it possible to adapt the tool exactly to the requirements of the application.
PAGE 64
Cleco Pneumatic Right Angle Nutrunners 19 Series Torque range: 0.5 - 11 Nm NEW! 19RAA07AH2 24RAA11AL3 ■ Class-leading accuracy and repeatability ■ External torque adjustment (Clecomatic models) ■ Reversible ■ 1/4" & 3/8" square drive 24 Series Torque range: 4.0 - 23 Nm ■ External torque adjustment (Clecomatic models) ■ 3/8" square drive ■ One torque spring to achieve the speciﬁed torque ■ Oilless blades 34 Series Torque range: 8.
PAGE 65
Speciﬁcations Model Number 1/4" Sq. Dr. 3/8" Sq. Dr. Torque Range* Speed Length Weight With Standard Spring Nm rpm mm kg mm mm Air Inlet NPT Min. Hose I.D. Air Cons. m³ / min. 0.6 - 2.1 0.7 - 2.4 0.6 - 2.4 0.7 - 2.7 1.4 - 4.7 1.4 - 4.7 1.5 - 5.4 1.5 - 5.4 3.4 - 8.5 3.4 - 11.3 3.4 - 11.3 2400 2100 1650 1450 950 570 850 500 500 340 200 303 316 310 321 305 316 316 326 326 312 326 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.9 0.9 1.0 0.
PAGE 66
Cleco Pneumatic Right Angle Nutrunners 45 Series Torque range: 28 - 115 Nm ■ ■ ■ ■ 45RNAB-3P-4 55RNAL-3T-4 Button start Reversible and non-reversible External torque adjustment 1/2" square drive 55 Series Torque range: 32 - 176 Nm ■ ■ ■ ■ ■ Lever start Reversible and non-reversible External torque adjustment Rotating exhaust deﬂector 1/2" square drive 75 Series Torque range: 95 - 430 Nm 75RNAL-2X-4 45, 55 & 75 model number example 55 R N A L - XX X - X Square Drive 3 – 3/8" 4 – 1/2" 6 – 3/
PAGE 67
Speciﬁcations Model Number Torque Range Speed Length Weight Head Height Side to Centre 1/2" Sq. Dr. Nm rpm mm kg mm mm 45 series - Clecomatic clutch - button start - reversibleomatic clutch - button start - reversible 45RNAB-4T-4 28 - 57 300 448 3.1 50 45RNAB-3P-4 35 - 71 240 445 2.9 41 45RNAB-3T-4 42 - 84 200 448 3.1 50 45RNAB-2P-4 46 - 96* 180 445 2.9 41 45RNAB-2T-4 50 - 115 150 448 3.1 50 45 series - Clecomatic clutch - button start - non-reversibleomatic 45NAB-3P-4 38 - 77 300 445 2.
PAGE 68
Cleco Nutrunners for High Torques 45 Series Inline Torque range: 14 - 62 Nm ■ Button start ■ Twist ring reverse 45RNAB-4-3 55 Series Inline Torque range: 27 - 91 Nm ■ Lever start ■ Twist ring reverse 55RNAL-4-4 64 Series Pistol Torque range: 34 - 3850 Nm ■ Button start ■ Reversible ■ Swingbar 64TTS640D8 Selectork 64 Series Torque range: 26 - 3850 Nm ■ ■ ■ ■ Selectork 64TTK34D4 64 model number examples 45 & 55 model number example 55 R N A L - Rotation N - Non-reversible R - Reversible 68
PAGE 69
Speciﬁcations Model Number Torque Range Drive Size Nm Free Speed 45 Series - inline - Clecomatic - trigger start - twist ring reverse 45RNAB-6-3 14 - 22 3/8 45RNAB-4-3 19 - 30 3/8 45RNAB-3-3 24 - 45 3/8 45RNAB-2-4 31 - 62 1/2 55 Series - inline - Clecomatic - lever start - twist ring reverse 55RNAL-4-4 27 - 46 1/2 55RNAL-3-4 34 - 69 1/2 55RNAL-2-4 46 - 91 1/2 Length Weight* Air Consumption rpm mm kg Air Inlet NPT 740 560 370 270 368 368 368 368 2.4 2.4 2.4 2.
PAGE 70
Cleco Pneumatic Tube Nut Wrenches 24 Series Torque range: 14 - 40 Nm ■ One hand, two position throttle ■ External torque adjustment ■ Auto alignment sockett 24 Series (T3) 24 Series (T2) 24 Series (T4) 24 Series Dimensions T2, T3 & T4 Head Height “B” T4 Head T3 Head T2 Head 2.63” (67 mm) 1.44” (37 mm) 1.56" (40 mm) “C” “A” “A” “C” “D” “C” “A” “D” “D” 1.94” (49 mm) Model Number Speed Torque Range Weight rpm Nm kg mm 5 - 12 1.2 14 - 20 20 - 30 26 - 40 2.0 2.0 2.
PAGE 71
Speciﬁcations Automatic Alignment Off Tube and hose applications that in the past were only feasible using hand tools can now be tightened using the Cleco family of tube nut wrenches. This operation takes place at a speed that signiﬁcantly increases your productivity. Socket return Forward Torque repetition accuracy is assured by the proven Clecomatic clutch and motor that does not fatigue.
PAGE 72
Cleco Pneumatic Crowfoot Nutrunners 24 & 34 Series Torque range: up to 68 Nm ■ "Stall" version ■ Non-reversible 34NRS 24NRS Cleco 24/34 series model number example 24 Tool Series 24 34 Tool Type N – Non-reversible Tool Type R – Lever start Torque Control S – Direct output drive Max.
PAGE 73
Speciﬁcations Standard Miniature straight Special order Standard straight Thin & extra thin 20° angle right 20° angle left 40° angle right 40° angle left 3" extended Other head types are available. Please contact your Apex Tool Group distributor.
PAGE 74
Cleco Pneumatic Assembly Tool Ratchet Sockets Standard Length Series H16, H30, 41 (no additional cost) Selection table for sockets with internal hexagon Code 12 13 15 16 18 20 25 29 37 "A" 3/4 13/16 15/16 1 1-1/8 1-1/4 1-9/16 1-13/16 2-11/32 1/2 1/2 9/16 9/16 9/16 9/16 9/16 5/8 5/8 "B" "C" Hex 1/4 inch S.H. 28000 28020 28048 1/4 inch D.H. 28001 28021 28051 9/32 inch S.H. 28012 5/16 inch S.H. 28002 28022 28040 28056 28101 5/16 inch D.H.
PAGE 75
Cleco P neumatic Assembly Tool Accessories Torque Reaction Bar Torque Reaction Mounting Plate Part Number Description Used On... Part Number Description Used On... 869770 48047128 Steel bar Steel bar Bucking bar collar with handle Bucking bar collar with handle Bucking bar collar with handle 45, 55 Series inline 64...
PAGE 76
Cleco H Series Pulse Nutrunners The Cleco H Series Pulse Nutrunners in Action When Speed Counts Fastening an axial piston motor using a Cleco H Series pulse nutrunner without shut-off 35PHH653 Critical Fastening Cases Fastening motor attachments using Cleco H Series pulse shut-off nutrunner 55PTHH403 If Accuracy Is Required Fastening plugs to a pump using a Cleco H Series pulse shut-off nutrunner 35PTHH403 Reaction-Free Production Fastening transformers using Cleco inline pulse shut-off nutrunner 7S
PAGE 77
Cleco H Series Pulse Nutrunners Advantages Durable. Economical. Low Maintenance. Unbeatable Performance We are constantly improving our products to guarantee you optimal productivity. The new Cleco H Series combines legendary service life with unmatched repeatability. Using this tool you can complete every joint quickly and reliably. Select the appropriate pulse nutrunner from the comprehensive range of shut-off and stall-type nutrunners.
PAGE 78
Cleco H Series Pulse Nutrunner Speciﬁcations Air Consumption Noise NoNo-Load/ Load Pulses (dB(A)) (m³/min) Bolt Size Torque Range (Nm) Free Speed (rpm) Weight (kg) Side to Centre (mm) Length (mm) 1/4" sq.dr. M5 4-7 3500 0.79 0.88 21 168 0.10 / 0.20 7PTHH35Q 7PTHHA35Q 1/4" QC M5 4-7 3500 0.79 0.89 21 173 11PTHH352 11PTHHA352 1/4" sq.dr. M6 6 - 11 3500 0.82 0.88 21 11PTHH35Q 11PTHHA35Q 1/4" QC M6 6 - 11 3500 0.85 0.91 11PTHH353* 11PTHHA353* 3/8" sq.dr.
PAGE 79
Cleco H Series Pulse Nutrunner Speciﬁcations N O N S H U T O F F Bolt Size Torque max. (Nm) Free Speed (rpm) 1/4" sq.dr. M5 7 7PHH60Q 7PHHA60Q 1/4" QC M5 11PHH653* 11PHHA653* 3/8" sq.dr. 11PHH652 11PHHA652 Air Noise NoConsumption Load No-Load (dB(A)) (m³/min) Weight (kg) Side to Centre (mm) Length (mm) 6000 0.77 0.82 21 168 0.25 7 6000 0.79 0.84 21 173 M6 11 6500 0.79 0.84 21 1/4" sq.dr. M6 11 6500 0.78 0.
PAGE 80
Cleco WL & WP Series Impact Wrenches WL & WP Series Torque range: 20 - 2,450 Nm Bolt size: M10 - M30 ■ Lever and trigger start ■ Reversible WL-200-3 WP-255-3P WP-455-4P WP-2049-6 WT Series with Spade Handle Torque range: 1,000 - 4,000 Nm Bolt size: M30 - M36 ■ Trigger start ■ Second handle ■ Reduced maintenance due to oil bath lubrication ■ Reversible WT-2109-8 80
PAGE 81
Cleco WL & WP Series Impact Wrench Speciﬁcations Bolt Size Size Square Output Drive Torque Range mm Inch Nm WL-200-3 M10 3/8 WL-200-4 M10 Model Number Free Speed rpm mm kg mm Torque Range Min. Hose Size Air Cons. m³ / min. 20 - 68 3200 3000 216 1.4 25 1/4" 1/4" 0.51 1/2 20 - 81 3200 3000 216 1.5 25 1/4" 1/4" 0.
PAGE 82
Cleco Impact Wrenches A New Generation of Impact Wrenches Patented Positive Locking Socket Retainer The socket engages in the patented positive locking socket retainer (U.S. patent 3.890.051) and is retained until released. As the retainer is connected to the tool via a spline, it can be maintained without dismantling the tool.
PAGE 83
Cleco Torque Veriﬁers The Series TVP-100 torque veriﬁer provides low-cost certainty during assembly for pneumatic, rotating and pulsing nutrunners. Building on the TME controller technology from Cleco, the user interface on the series TVP-100 permits straightforward setup and operation of the tool. The new Cleco torque veriﬁers TVP-100 improve the assembly process as user errors due to releasing the trigger too early, stripping the screw thread or re-hits are indicated.
PAGE 84
Cleco Torque Veriﬁer Speciﬁcations Features ■ Check nutrunner settings with optical and acoustic OK/NOK indication ■ On-screen check on the individual nutrunner status with count function ■ Graphic indication with a graph for each fastening ■ Saves 1,000 processes ■ Sequence control feature ■ 8 parameter sets available for different applications ■ "Auto Cal" permits quick, straightforward tool set-up for different fastening types ■ Password-protected ■ Different languages can be selected TVP-100 Torque Ver
PAGE 85
Cleco Torque Veriﬁer Accessories Torque Veriﬁer Kits Part Number For the Tools... 301106 302021PT 201900 301937PT 19SCA & 19RAA Series 19TTA & 19PTA Series 24RAA & 34RAA Series (old version) 24RAA & 34RAA Series (new version) 934918 PTH Series pulse nutrunners (C & D & H Series) Cable for Dig.
PAGE 86
Cleco Balancers BL Series Load Capacity Range 0.5 - 1.8 kg ■ ■ ■ ■ ■ ■ ■ Impact-resistant plastic housing Resilient, durable spring Mounting eye can be rotated 360° Mounting point for safety chain Adjustable cable stop Adjustment of the spring tension using external rotary knob Nylon rope BL-2B BL-1/2B Load Capacity Rope Weight kg m kg BL-1B 0.5 - 0.9 1.6 0.43 BL-2B 0.8 - 1.8 1.6 0.
PAGE 87
Cleco Balancers BL Series Load Capacity Range 0.4 - 2.3 kg ■ Steel housing, colour orange RAL2004 ■ Adjustable cable stop permits adjustment of tool to the required height ■ Cable diameter 2.5 mm Option: 939597 safety chain (L=0.38 m) BL-3B BL-3B Load Capacity Range 1.8 - 10 kg ■ Steel housing, colour orange RAL2004 ■ Spring break protection ■ Adjustable cable stop permits adjustment of tool to the required height ■ Carabiner hook can be rotated 360° ■ Cable diameter 2.
PAGE 88
Cleco Balancers BM Series Load Capacity Range 2.3 - 30 kg ■ Aluminium housing ■ Spring break protection ■ Adjustable cable stop permits adjustment of tool to the required height ■ Manual drum locking ■ Coated cable drum against wear ■ Mounting bar can be rotated 360° ■ Cable diameter 3.0 mm Option: 939536 safety chain BM-14B BL-5B / 9B /14B / 18B / 23B / 30B Load Capacity Rope Weight kg m kg BM-5B 2.3 - 5.0 1.8 7.4 BM-9B 5.0 - 9.0 1.8 7.4 BM-14B 9.0 - 14.0 1.8 7.4 BM-18B 13.0 - 18.
PAGE 89
Cleco Balancers BM Series Load Capacity Range 31 - 45 kg ■ Aluminium housing ■ Spring break protection ■ Adjustable cable stop permits adjustment of tool to the required height ■ Manual drum locking ■ Coated cable drum against wear ■ Mounting bar can be rotated 360° ■ Cable diameter 5.0 mm Option: 939536 safety chain BH-39B BH-39B / 41B / 45B Load Capacity Rope Weight kg m kg BH-39B 31.0 - 39.0 2.1 17 BH-41B 36.0 - 41.0 2.1 17 BH-45B 40.0 - 45.0 2.
PAGE 90
Cleco Balancers BH Series Load Capacity Range 38.3 - 91 kg ■ ■ ■ ■ ■ ■ ■ ■ Two-spring model Aluminium housing Spring break protection Adjustable cable stop permits adjustment of tool to the required height Manual drum locking Coated cable drum against wear Mounting bar can be rotated 360° Cable diameter 5.0 mm Option: 939536 safety chain BH-52B BL-52B / 57B / 66B / 75B / 79B / 91B Recommendable: Additional securing using safety chain/rope Load Capacity Rope Weight kg m kg BH-52B 38.3 - 52.0 2.
PAGE 91
Cleco / DGD Pneumatic Power Motors Overview Select the Right Pneumatic Power Motor for Your Application The Apex Tool Group’s pneumatic power motors have been developed for ﬂexibility and reliability.
PAGE 92
Cleco / DGD Pneumatic Power Motors Small Blade Motors 8MZ G 1/8 15MZ G 1/4 Special equipment: Connection ring for exhaust air Mounting bracket 25MZ Order number 922795 Order number 930157 G 1/4 Special equipment: Mounting bracket Exhaust air Order number 930157 Order number 922907 G 1/4 25MZV 35MZ 92 G 1/8 G 3/8 Special equipment: Connection ring for exhaust air Order number 922907 Special equipment: Connection ring for exhaust air Order number 922907
PAGE 93
Cleco / DGD Pneumatic Power Motor Speciﬁcations Power Class 0.06–1.10 kW Highest Power kW Speed rpm rpm Non-reversible (clockwise rotating) 0.06 2150 4300 0.06 1250 2500 0.06 675 1350 0.06 400 800 0.06 240 480 Reversible 0.06 2150 4300 0.06 1250 2500 0.06 675 1350 0.06 400 800 0.06 240 480 Reversible 0.32 2350 4700 0.29 1090 2180 0.22 725 1450 0.22 415 830 0.22 230 460 Reversible 0.45 1830 3660 0.45 1000 2000 0.41 570 1140 0.41 325 650 0.41 190 380 Reversible 0.38 175 350 0.35 125 250 Reversible 1.
PAGE 94
Cleco Electrical Assembly Tools Overview Cleco fastening technology is used worldwide and in all industries. This technology is used in aerospace, automotive, environment, wind energy, agriculture and a great number of different applications in general industry where quality critical requirements are the rule.
PAGE 95
The Cleco LiveWire™ system offers the most cost-effective fastening solution for safety-critical applications available worldwide. The combination of cordless tools with WLAN communication gives the operator the necessary mobility and ﬂexibility for higher productivity and reduces costs due to system damage. The controller, which can manage up to 16 cordless tools, utilises the latest wireless encryption technology and in the process provides unmatched cost savings in industry.
PAGE 96
Cleco Electrical Assembly Tools Durability. Speed. Cost-effective solution for maximum performance in quality-critical applications. The electrical assembly tools from Cleco with current control are more mature than the compressed air tools with pneumatic clutch and torque veriﬁer available on the market. The patented current control systems from Cleco impress with higher productivity, more sophisticated error detection and increased ﬂexibility in use.
PAGE 97
Ergonomics.
PAGE 98
Cleco Global Controller Overview mPro400GC Global Controller ■ Graphic user interface ■ Fully programmable ■ Local storage of up to 10,000 fastening operations ■ LAN support ■ Fieldbus options available Master/primary controller MPRO400GC-M Secondary controller mPro400GC-SG Global Controller The mPro400GC-SG controller provides the same capabilities and functions as the mPro400GC-M controller with the additional beneﬁt of panel mounting.
PAGE 99
Cleco Global Controller Overview Torque Monitoring mPro400GC-E & mPro400GC-I Global Controller ■ ■ ■ ■ Single channel Economical Remote programming Local storage of up to 5,000 fastening operations ■ LAN support ■ Input voltage 115/230VAC ■ Connectors: 1x serial 1x TM-COM 1x Ethernet ■ Inputs/outputs: 8x 24 V inputs, 8x 24 V outputs All 67 Series tools require an isolating transformer (544185PT) for operation with a Cleco Global Controller.
PAGE 100
Cleco Corded Right Angle Nutrunners with Transducer Right Angle Series Torque range Bolt size 2 - 230 Nm M5 - M16 ■ ■ ■ ■ 18EAE28AM3 Brushless motor High-resolution resolver Integrated transducer Memory chip with all relevant tool data 48EAE58AM3 XX E A Motor Supply 18, 48 E - Electrical E XXX XXX Connector E Air-LB Locking Pin locking B - Ball locking Tool Type Output Drive A – Right angle AL2 – 1/4" sq. dr. AM4 – 1/2" sq. dr. AL3 – 3/8" sq. dr. AH4 – 1/2" sq. dr. AM3 – 3/8" sq. dr.
PAGE 101
Cleco Corded Right Angle Nutrunners with Transducer Right Angle Series Torque range 46 - 2,000 Nm ■ ■ ■ ■ 67EA235AL6 Bolt size M18 - M36 Brushless motor High-resolution resolver Integrated transducer Memory chip with all relevant tool data All 67 Series tools require an isolating transformer (544185PT) for operation with a Cleco Global Controller.
PAGE 102
Cleco Corded Inline Nutrunners with Transducer Inline Series Torque range 2 - 150 Nm XX Bolt size M5 - M14 E S E XXX XX Connector E Air-LB Motor Supply 18, 48 E - Electrical X Locking Pin locking B - Ball locking Tool Type Output Drive S – Inline Q – Quick-change chuck D2 - 1/4" sq. dr. D3 - 3/8" sq. dr. D4 - 1/2" sq. dr. Max. Torque (Nm) Under 60 Nm, rounded up to next 1 Nm. Above 60 Nm, rounded up to next 5 Nm.
PAGE 103
Cleco Corded Inline Nutrunners with Transducer Inline Series Torque range 13 - 4,050 Nm Bolt size M10 - M42 All 67 Series tools require an isolating transformer (544185PT) for operation with a Cleco Global Controller.
PAGE 104
Cleco Corded Pistol Grip Nutrunners with Transducer Pistol Grip Series Torque range 2 - 1000 Nm Bolt size M5 - M22 18EPE12Q 48EPE25D3 XX E P Motor Supply 18, 48 E - Electrical E XXX XX Connector E Air-LB X Locking Pin locking up to 1/2" Tool Type Output Drive P – Pistol Q – Quick-change chuck D2 - 1/4" sq. dr. D3 - 3/8" sq. dr. D4 - 1/2" sq. dr. D6 - 3/4" sq. dr. D8 - 1" sq. dr. Max. Torque (Nm) Under 60 Nm, rounded up to next 1 Nm. Above 60 Nm, rounded up to next 5 Nm.
PAGE 105
Cleco Corded Nutrunners with Transducer Push-to-Start Series Torque range 2 - 12 Nm Bolt size M5 - M6 18EPE06QP 18ESE06QP XX E P Motor Supply 18, 48 E - Electrical E XX XX Connector E Air-LB P Push-to-start Tool Type Output Drive P – Pistol S - Inline Max. Torque (Nm) Q – Quick-change chuck D3 - 3/8" sq. dr. Under 60 Nm, rounded up to next 1 Nm.
PAGE 106
Cleco Corded Inline Floating Spindle Nutrunners with Transducer Inline Floating Spindle Series Torque range Bolt size 2 - 248 Nm M5 - M16 XX E S E XXX Connector E Air-LB Motor Supply 18, 48 E - Electrical 48ESE12ZA XXX Output Drive ZA - 1/4" sq. dr. 1ZB - 3/8" sq. dr. 2ZB - 1/2" sq. dr. 3ZB - 3/4" sq. dr. Tool Type S – Inline Max. Torque (Nm) Under 60 Nm, rounded up to next 1 Nm. Above 60 Nm, rounded up to next 5 Nm. Hole pitch dimensions ZA 1ZB 2ZB 1.22” 31.1mm 1.50” 38.1mm 1.559” 39.
PAGE 107
Cleco Corded Inline Floating Spindle Nutrunners with Transducer Inline Floating Spindle Series Torque range Bolt size 13 - 2,060 Nm M6 - M36 67ES2060Z8 Mounting plates, dimensions Z4 All 67 Series tools require an isolating transformer (544185PT) for operation with a Cleco Global Controller. Z6 2.372" 2.375" PILOT DIA. 2.500" 2.499" PILOT DIA. 3.010" 1.563" 1.185" 3.750" 1.505" Isolating transformer 544185PT 1.685" Spindle float: .69" (17mm) .281" DIA. THRU 2 HOLES 2.005" Spindle float: .
PAGE 108
Cleco Corded Hold & Drive Nutrunners with Transducer Hold & Drive Series Torque range 11 - 227 Nm Hold & Drive tool approaches the application. 48EAE115H Holding socket ﬁts over the bolt and prevents it rotating. "Hold & Drive" bolts are used with these tools for automotive and truck chassis applications. They reduce the assembly operation to one person who works from one side of the workpiece. The bolt is held by the tool while the nut is tightened from the same side.
PAGE 109
Cleco Corded Flush Nutrunners with Transducer Flush Socket Series Torque range 4.9 - 230 Nm Head height ■ ■ ■ ■ Available clearance Bolt size M8 - M21 Motor resolver High-resolution resolver Integrated transducer Memory chip with all relevant tool data X dimension for flush socket Flush socket tools have plenty of clearance for applications with little space. Electric ﬂush socket tools fasten with much greater precision than tools with a crowfoot attachment. Head in. mm F1 1.
PAGE 110
Cleco Corded Tube Nutrunners with Transducer Tube Nut Series Torque range 10 - 40 Nm T3 The 48ET tube nut wrench changes direction each time the lever is actuated. If the direction of rotation is counter clockwise, the socket stops in the open position. T4 T2 Head T2, T3 & T4 Head Height “B” 2.63” (67 mm) “A” T4 Head T3 Head 1.56” (40 mm) “C” 1.44” (37 mm) “A” “D” “C” “C” “A” “D” “D” 1.
PAGE 111
Cleco Corded Crowfoot Nutrunners with Transducer Crowfoot Series Torque range 7 - 30 Nm Crowfoot tool nomenclature 48 E C E Socket nomenclature XX XX Connector E Air-LB Motor Electric 48 Bolt size M6 - M8 CS XX XX Socket Type CS – Crowfoot X 48ECE30C 1 Output Drive 1 – Thru hex Tool Type C – Crowfoot Extension 0 – Flush 4 – 1/2" 6 – 3/4" Socket Size EA – 1/4" EC – 3/8" EE – 1/2" EF – 9/16" MA – 7 mm MB – 8 mm (5/16") Max.
PAGE 112
Cleco Corded Right Angle Floating Spindle Nutrunners with Transducer Right Angle Series with Floating Spindle Torque range Bolt size 5.1 - 255 Nm M7 - M18 48EAE135S461 Right angle series with ﬂoating spindle nomenclature XX E A Motor Electric 18 48 Tool Type 67 A – Right angle X XXX XX X X Sq. Dr. 3 – 3/8" (S1, S2) 4 – 1/2" (S3, S4) 6 – 3/4" (S4) Connector - Air-LB Max.
PAGE 113
Cleco Right Angle Heads for Right Angle Floating Spindle Nutrunners 18EA, 48EA & 67EA ﬂoating spindle right angle heads S1 head Extension "X" 1 – 1.13" (3/8" sq. dr.) 2 – 2.13" (3/8" sq. dr.) S2 head Extension "X" 1 – 1.0" (3/8" sq. dr.) 2 – 3.0" (3/8" sq. dr.) 5 – 5.13" (3/8" sq. dr.) S3 head Extension "X" 1 – 1.0" (1/2" sq. dr.) S4 head Extension "X" 1 – 1.25" (1/2" & 3/4" sq. dr.) 2 – 2.5" (1/2" sq. dr.) 5 – 4.25" (1/2" & 3/4" sq. dr.) 6 – 6.0" (1/2" sq. dr.) 6 – 7.0" (3/4" sq. dr.) 11 – 11.
PAGE 114
Cleco Current Control Right Angle Nutrunners Right Angle Series Torque range 2 - 230 Nm 48CAE58AM3 Bolt size M5 - M16 18CAE28AM3 XX C Motor 18, 48 Current Control A E XXX XXX Connector E - Air-LB X Locking Pin locking B - Ball locking Tool Type A – Right angle Output Drive AL2 – 1/4" sq. dr. AM4 – 1/2" sq. dr. AL3 – 3/8" sq. dr. AH4 – 1/2" sq. dr. AM3 – 3/8" sq. dr. MH4 – 1/2" sq. dr. AX6 – 3/4" sq. dr. Max. Torque (Nm) Under 60 Nm, rounded up to next 1 Nm.
PAGE 115
Cleco Current Control Inline Nutrunners Inline Series Torque range 2 - 150 Nm 48CSE25D3 XX C Motor 18, 48 Current Control S E XXX 18CSE06Q XXX Connector E - Air-LB Bolt size M5 - M14 X Locking Pin locking B - Ball locking Tool Type Output Drive S – Inline Q - Quick-change chuck D2 - 1/4" sq. dr. D3 - 3/8" sq. dr. D4 - 1/2" sq. dr. Max. Torque (Nm) Under 60 Nm, rounded up to next 1 Nm. Above 60 Nm, rounded up to next 5 Nm.
PAGE 116
Cleco Current Control Pistol Grip Nutrunners Pistol Grip Series Torque range 2 - 150 Nm Bolt size M5 - M14 48CPE25D3 18CPE6Q XX Motor 18, 48 C Current Control P E XXX XX Connector E Air-LB X Locking Pin locking B - Ball locking Tool Type Output Drive P – Pistol Q - Quick-change chuck D2 - 1/4" sq. dr. D3 - 3/8" sq. dr. D4 - 1/2" sq. dr. Max. Torque (Nm) Under 60 Nm, rounded up to next 1 Nm. Above 60 Nm, rounded up to next 5 Nm.
PAGE 117
Cleco Current Control Pistol Grip/Inline Nutrunners Push-to-Start Series Torque range 2 - 12 Nm Bolt size M5 - M6 18CPE06QP 18CSE06QP XX C Motor 18, 48 Current Control X E XXX XX Connector E - Air-LB P Push-to-start Tool Type Output Drive P - Pistol S – Inline Q - Quick-change chuck D3 - 3/8" sq. dr. Max. Torque (Nm) Under 60 Nm, rounded up to next 1 Nm. Torque Range Speed Weight* Nm rpm kg 2-6 2-6 3 - 12 3 - 12 2-6 2-6 4000 4000 1820 1820 4000 4000 1.19 1.19 1.27 1.27 1.31 1.
PAGE 118
Cleco Electric Control Nutrunners – Accessories Tool Type Model Number Cover Rotating Suspension Bail Mounting Plate Extension Kit Right angle 17/18EA08AL2 205832 541715-2 --- --- 17/18EA…AM3 205834 541715-2 --- 535832 47/48EA…AM3/4 543070 541715-2 543235 --- 47/48EA…AH4 543070 541715 543230 542428 47/48EA135MH4 543071 541715 543230 542428 47/48EA…AX5 205838 541715 543232 --- 67EA…AL6 205838 35007004 49097101 48316033 67EA…AM6 --- 48A17006 (included in the stand
PAGE 119
Cleco Electric Control Nutrunners – Cables Tool Cable with Air-Lb Order No.
PAGE 120
The New LiveWire 2 Right Angle Nutrunners Light. Intelligent. Full perLiveWire 2 offers functions for precise torque, angle and speed control for safety-critical fastening cases, packed in a new, light, wireless design. With more than 1700 fastening operations per battery charge and the quick charging feature you are assured long tool operating times for the assembly of your safety-critical applications. Cleco Cordless LiveWire 5.
PAGE 121
formance. Without Cables. Expansion Platform for Optional Accessories ■ Barcode scanner (order no.
PAGE 122
Modular Fastening Systems with Cordless LiveWire Tools The Most Cost-Effective Solution for SafetySavings of up to 50 % Compared to Conventional Systems! Mobility is one of the main advantages of wireless communication. LiveWire™ from Cleco combines the freedom and flexibility of cordless tools in fastening applications where documentation is required. By using a 2.
PAGE 123
Critical Screwed Joints on the Market. Up to 83% More Productivity! Cleco LiveWire™ tools are also available with Vmax™, a corded solution that offers lasting tool performance and increases the speed by up to 83 % without compromising accuracy or service life. These innovations operate on the same principle using which up to 10 tools are controlled by one nutrunner controller. In this way up to 50 % of the costs are saved compared to conventional systems.
PAGE 124
Cleco LiveWire Applications Numerous ApplicationCordless Right Angle Nutrunner for Motor Assembly Fastening accessories using a Cleco right angle nutrunner incl. tool bail on a balancer. 47BAYSB35AM3 with 936400PT Straightforward Fastening using LiveWire Pistol Grip Nutrunner Fastening armrest using a Cleco pistol grip nutrunner.
PAGE 125
Areas for LiveWire Tools Cleco LiveWire fastening tools at the Austrian sports car manufacturer KTM in Graz. LiveWire right angle and pistol grip nutrunners together with a cordless electronic torque wrench on a common nutrunner controller. Cordless productivity for all safety-critical joints on the premium sports car X-Bow. Cleco LiveWire I-Wrench WLAN torque wrench in professional case.
PAGE 126
New LiveWire 2 Right Angle Nutrunners with Transducer LiveWire 2 Right Angle Nutrunners Torque range 5.
PAGE 127
Cordless Right Angle Nutrunners with Transducer LiveWire Right Angle Series Torque range 5.5 - 70 Nm Bolt size M5 - M10 ■ Brushless precision motor ■ High-resolution resolver ■ Exact torque measurement 47BAYSB28AM3 by transducer ■ Integrated electronic intelligence with power management and I/O signal processing ■ Integrated servo Right angle nutrunner nomenclature 47 B A Motor Supply 47 B- Batt./PM48 Tool Version X X B Output Drive Size B – 26–48V AM3 – 3/8" Sq. dr.
PAGE 128
Cordless Pistol Grip Nutrunners with Transducer Pistol Grip Series Torque range 3.0 - 13 Nm Bolt size M5 - M6 ■ Brushless precision motor ■ High-resolution resolver ■ Exact torque measurement by transducer ■ Integrated electronic intelligence with power management and I/O signal processing ■ Integrated servo 17BPYSB13Q (The Apex μ-Guard bit shown above is not included the standard equipment.
PAGE 129
Cordless Tube Nutrunners with Transducer Tube Nut Series Torque range 10 - 40 Nm T3 Bolt size M6 - M8 ■ Brushless precision motor ■ High-resolution resolver ■ Exact torque measurement T4 by transducer ■ Integrated electronic intelligence with power management and I/O signal processing ■ Integrated servo On the 47BT tube nutrunner a single lever controls the tightening of the fastener and the return of the hex socket to the open position.
PAGE 130
Cordless Crowfoot Nutrunners With Transducer Crowfoot Series Torque range 10.5 - 30 Nm Bolt size M6 - M8 ■ Brushless precision motor ■ High-resolution resolver ■ Exact torque measurement by transducer ■ Integrated electronic intelligence with power management and I/O signal processing ■ Integrated servo 47BCYSB30C1 C1 – 15° head (order no. 301071) C3 – 30° head (order no. 301072) Maximum recommended torque: 30 Nm Maximum recommended torque: 30 Nm 19 mm 19 mm . m dia 35 m . m dia 39 m .
PAGE 131
Power Supply, Batteries, Chargers Cordless Freedom The Choice Is Yours.
PAGE 132
Power Module, Nutrunner Controllers and Software LiveWire Power Module PM 48 ■ Up to 83 % higher speeds! ■ Wide range input – (85-275 VAC) ■ LEDs for power & status ■ Electronic monitoring ■ Solid metal housing ■ Low weight – only 3.1 kg Comparison of the Speed Increase Pistol grip design Series Power Module 961350PT Weight Width Height Depth kg mm mm mm 3.1 240 120 150 Right angle design Order No.
PAGE 133
Accessories for Cordless LiveWire Fastening Technology Batteries Diagnostics Device for 44 V Batteries Order No. Description 935377 936400PT 26 V Li-ion 44 V Li-ion Weight kg 0.50 0.85 936400PT 935377 Battery Chargers Order No. Description 935391 936491PT 26 V battery charger 26 V/44 V batt. charger 935391 936491PT Order No. Description 936492PT Battery diagnostic device incl.
PAGE 134
Accessories for Cordless LiveWire Fastening Technology Fieldbus Modules Protective Tool Covers Order No. Module Description Order No. 544171PT 544172PT 544278PT 544173PT 544174PT 544211PT Fieldbus Devicenet Fieldbus Ethernet-IP 1 x RJ45 Fieldbus Ethernet-IP 2 x M12 Fieldbus Proﬁbus DB9 Fieldbus Proﬁnet 2 x RJ45 Fieldbus Modbus/TCP 1 x RJ45 936372 Description Protective covers for right angle tool 47BA..15-28AM3 Also suitable for LiveWire 2 tools. 936373 Protective covers for right angle tool 47BA..
PAGE 135
LiveWire I-Wrench Nomenclature I W R E N C H Model Name Description I-Wrench 15 I-Wrench 30 I-Wrench 70 I-Wrench 100 I-Wrench 200 I-Wrench 300 I-Wrench 400 I-Wrench 600 I-Wrench 800 I-Wrench 1000 I-Wrench 1200 Torque & angle wrench Torque & angle wrench Torque & angle wrench Torque & angle wrench Torque & angle wrench Torque & angle wrench Torque & angle wrench Torque & angle wrench Torque & angle wrench Torque & angle wrench Torque & angle wrench Torque Range (Nm) 1.
PAGE 136
LiveWire I-Wrench Cordless. Flexible. Your Productivity – Your Freedom Our Cleco LiveWire I-Wrench is a really universal production tool for meeting your ﬂexible manufacturing needs. It is the perfect tool for fastening operations on your components. It is also suitable for your production line, as it enables you to use various fastening strategies with torque/angle.
PAGE 137
LiveWire I-Wrench User-Friendly. Precision Navigation ■ ± 0.5% display error at 20% - 100% nominal torque ■ ± 1% display error at 10% - 20% nominal torque ■ ± 0.5° display error on the angle Menu prompts with colour touchscreen display or navigation buttons ■ Torque & angle data ■ Graphs on the controller ■ Application images Features ■ ■ ■ ■ ■ Automatic tool detection 1 GB memory for 20000 measurements 20000 graphs 1000 parameter sets 9 hrs.
PAGE 138
LiveWire I-Wrench Speciﬁcations Model Number Model Name Description Accessories on the Tool 313110030 I-Wrench-DRP Rubber protection with screen protection 197140013 I-Wrench-PU Programming unit with tool detection 197130020 TAW-PSS3-RP 15/30 Charging station for Cleco LiveWire I-Wrench 15/30 Nm with rubber protection 197130021 TAW-PSS3-RP 70/100 Charging station for Cleco LiveWire I-Wrench 70/100 Nm with rubber protection 197130022 TAW-PSS3-RP 200 Charging station for Cleco LiveWire I-Wren
PAGE 139
LiveWire I-Wrench Ratchets and Open-Ended Insert Tools Without Tool Detection (Fully Prepared for the Installation of Tool Detection) With Tool Detection R Model Number Description Model Number Description A 197170001 197170002 197170003 197170005 197170006 197170007 197170008 197170146 197120147 9 x 12 - 1/4” 9 x 12 - 3/8” 9 x 12 - 1/2” 14 x 18 - 1/2” 14 x 18 - 3/4” Ø 20 - 3/4” Ø 20 - 1” Insert for customer spec. application 9 x 12 Insert for customer spec.
PAGE 140
Repair and After Sales Service Repair. Service. Support. Service & Support Even the most reliable tools require maintenance and care from time to time. The Apex Tool Group is also your capable partner for service and maintenance to ensure that your productivity is retained. Fixed Price Repair The Apex Tool Group offers ﬁxed price repairs in accordance with your requirements and wishes. Quotations for repairs without delays and loss of time. Repairs are undertaken by our qualiﬁed staff.
PAGE 141
After Sales Service. Genuine Spare Parts The Apex Tool Group service centres only use genuine spare parts. As a consequence the performance and reliability of the tools again meet the high requirements on Apex Tool Group products. Certiﬁcation Our latest nutrunner inspection systems with hybrid technology can be traced back to the standards used in a DKD laboratory, which operates in accordance with DIN EN ISO / IEC 17025, as well as a calibration certiﬁcate in accordance with VDI / VDE 2646.
PAGE 142
Website Strong Brands With the Power Tools division, the Apex Tool Group offers a complete series of high quality industrial tools and related accessories – some of the most powerful and respected brands in the industry. All Information Available Online for Download Manuals, technical drawings, installation instructions, product images as well as homologation information is available in the download area of our website. www.apexpowertools.
PAGE 143
Full catalogues available online Tube cleaners and expanders, rolling motors … Catalogue: SP-1100 Cleco Pneumatic power motors … Catalogue: SP-104 Assembly, material removal and grinding tools Catalogue: SP-904 Bits, sockets and universal joints Material removal tools, drills, grinders, polishers ... Catalogue: TC-100 Cleco and DGD DC electric assembly tools Catalogue: SP-102 Cleco Pneumatic assembly tools Catalogue: SP-1020 Catalogue: SP-1000 Service/ after market services www.apexpowertools.
PAGE 144
Sales and Service Centres G E R M A N Y E N G L A N D Apex Tool Group GmbH & Co. OHG Industriestrasse 1 73463 Westhausen Germany Tel.: +49 73 63 81 0 Fax: +49 73 63 81 222 E-mail: info@apexpowertools.eu Apex Tool Group GmbH & Co. OHG C/O Spline Gauges Piccadilly, Tamworth, Staffordshire B78 2ER United Kingdom Tel.: +44 1827 8741 28 Fax: +44 1827 8741 28 I TA LY Apex Tool Group SNC 25 rue Maurice Chevalier B. P. 28 77831 Ozoir-la-Ferrière Cedex France Tel.