Operator`s manual

MODEL CS 208 v2
MAY 2003
INPUT MODULE
2
Right Section
17. Gain: Mic/Line preamp gain.
18. HF: High frequency amplitude control.
19. MF 500, 5k Mid-frequency select.
20. MF: Mid-frequency amplitude control.
21. N/S: N = normal, S = side for M/S decoding.
‘S’ inverts phase to B & D busses allowing one pair of channels to be
used with a M/S mic configuration and decoded to a L/R stereo signal
(this is an option, see separate application note).
22. LF: Low frequency amplitude control.
23. PF/AF: Selects pre or after fader for Aux 1 send.
24. A1: Aux 1 send (the aux sends are not affected by the ABCD mix bus
switches).
25. PF/AF: Selects pre or after fader for Aux 2 send.
26. A2: Aux 2 send.
27. Pan (switch): Switching the pan switch to the left disengages the panpot.
Crosstalk is therefore minimized and the output levels will remain equal.
28. Pan (pot): (L) = A & or C
(R) = B & or D
29. Channel fader