Operator`s manual

MODEL CS 208 v2
MAY 2003
ADC SPECIFICATIONS
36
Power Supply: Total power 2.8 W
Clock Frequencies & Level: Level: 3.3v p-p square wave, 75 ohms output impedance
Frequency accuracy: +/- 10 ppm at 20ºC.
External Reference In: Input impedance: 75 ohm
Word clock input:
Input level: 1.0 V peak to 5 V peak
Lock range: 48 kHz or 96 kHz +/- 100 ppm
48.048 kHz or 96.096 kHz +/- 100 ppm
Jitter tolerance:3 UI (wide bandwidth)
AES/EBU input:
Input level: 1.0 V peak to 5 V peak
Lock range: 48 kHz or 96 kHz +/- 100 ppm
48.048 kHz or 96.096 kHz +/- 100 ppm
Jitter tolerance: 1 UI (wide bandwidth)
Input clipping LED: -0.5 dBFS +/-0.1 dB
THD + N @ -1 dBFS 1 kHz Sine: Typical
24/96 k -103 dB
24/48 k -103 db
16/96 k -95 dB
16/48 k -93 dB
Dynamic range (-60 dBFS): Linear Typ. ‘A’ wt’d typ.
24/96 k 107 dB 110 dB
24/48 k 107 dB 110 dB
16/96 k 96.5 dB 99 dB
16/48 k 94 dB 96 dB
Signal to Noise ratio: Linear Typ. ‘A’ wt’d typ.
24/96 k 107 dB 110 dB
24/48 k 107 dB 110 dB
16/96 k 96.5 dB 99 dB
16/48 k 94 dB 96 dB
Frequency Response: 20 Hz to 20 kHz +/- 0.1 dB
Channel gain variations: +/-0.05 dB