Operator`s manual

MODEL CS 208 v2
SPECIFICATIONS
MAY 2003
11
Output:
Reference -8 PPM, 0VU (XLR’s are pin 2 high)
XLR balanced outputs:
A, B, C, D & Aux. 1, 2 +4 dBu, Z
out
≈ 100Ω
TQG & DB 9 unbalanced outputs:
(ABCD) -2 dBu, Z
out
≈ 100Ω
Phones 1 out: 0 dBu no load
0 dBu 60Ω load
Phones 2 &3: -3 dBu no load
-8 dBu 60Ω load
Maximum load is 25Ω for each output:
Tape return (balanced) -14 dBu to + 19 dBu Z
in
= 10kΩ
Communication in (balanced) -14 dBu to + 19 dBu Z
in
= 10kΩ
Ext. slate in (unbalanced) -60 dBu to - 38 dBu Z
in
= 5kΩ
Mix bus in - current input - R. series 10kΩ -8 dBu (-10 dBV)
20kΩ -2 dBu
(needs series resistors) 40kΩ +4 dBu
Signal (M. O. L.) to noise of output section:
(Dynamic range)
(Channel faders off, masters at max) -115 dB 20-20 kHZ
Slate subtone 27 Hz (at -16 PPM, -8vu)