User`s guide

34
Option 2-7: Assigning Zones to Wards
The assignment of zones to wards is usually
carried out by your alarm company.
Change these assignments only if you have
detailed knowledge of your alarm system
and the way that wards are used in it.
Z
You can assign zones only to wards
assigned to your user code.
User 2 Menu 7
Configure Wards
1. Press [ to select this option.
0001
Ward : 1.......
2. Press | or ¬ to scroll to the zone, or
enter the zone's four-digit number, then
press [. See page 53 for details of
zone numbering.
Z
You can press r to choose the
zone on the next network. However,
if you keep scrolling, you will reach
all zones anyway.
0001
Ward > **......
3. Use the numeric keys to select the
zone's wards, then press [. The ward is
selected if its number is displayed. (A “*”
indicates that the ward is not selected.
A “.” Indicates that either you have no
access to the ward or the ward is not
programmed.)
4. Continue from step 2 to select another
zone, or press ] to exit.