User`s guide

32
Option 2-6: Using Communications
Option 2-6-1:
Starting a Call Back
You can use this option to initiate a
connection over the telephone line to a
remote site that is running the Cooper
Security Downloader software. Once the
communication link is established, the
remote site can upload data and change
settings in the control panel. The link
continues until the remote site disconnects
it.
Z
Select this option only if requested by
your alarm company.
Z
Your alarm company may be able to
initiate the link, depending on the
Access Mode (Engineer option 2-5-1-3).
User 2 Menu 6
Communications
1. Press [ to select this option.
Communication 1
Start Call Back
2. Press [ to select Start Call Back.
Start CallBack 1
08700543678
3. Use | or ¬, or press a hot key (1 to
4) to select the number to call (as
defined in User option 2-6-2), then press
[ to begin the call.
Calling On : 1
Hit ESC to abort
4. If the connection is established successfully,
the system automatically returns to its original
state. If the connection is not established
successfully, press ] to abandon the call.