User`s guide

24
Option 2-4-1:
Configuring the User
Codes
This option enables you to set up or modify
users. For each user, you specify
information such as the user type and the
wards the user has access to.
User 2 Menu 4
Edit Codes
1. Press [ to select this option.
User Codes 1
Code
2. Press [ to select Code.
Define new users
User no. 05
3. The lowest available user number is
displayed. You can press [ to select
this user. Alternatively, you can select a
different user by entering a number or
by using | or ¬.
Z
Pressing r shows the number of
users currently set up. Press any key
to return to the previous display.
Prox Tag or Code
----
4. Enter the user code
1
and press [, or
present the user's proximity tag. Pressing
[ without entering a code maintains
the previously-chosen code or tag.
Z
If you see “NOT ACCEPTED try a
different code”; the code is
already in use. Press r and try
again with a different code.
User 05 is type
Not in use
5. Use | or ¬ or press a hot key (0 to 9)
to select the user type (page 21), then
press [.
1
4 or 6 digits (giving up to 1,000,000 code combinations, with none disallowed), as set up in Eng option 1-9-3.