User`s guide

22
Easy Set 5
When unsetting, all associated wards are
unset and the keypad displays no options.
The system sets with no options, providing
auto-set wards are set up. The user can
set/unset from any keypad.
Z
You must set up wards assigned to an
Easy Set user as auto-set and auto-
unset, see page 25 onwards.
Reset Only 6
Users of this type have access to User Menu
1, options 1, 2, 3, 4, 5, 8 and 9. They can
reset 24-hour alarms from any keypad.
Panic Code 7
Users of this type have no access to user
menus and cannot set or unset the system.
Entering a user code of this type generates
a Panic Alarm and activates a full alarm
(causing internal and external sounders and
strobe lights to operate).
Z
To set up a Panic code, Duress Allow in
Engineer option 1-9-1-24 must be set to
YES.
Duress Code 8
Users of this type have the same abilities as
a standard global user but, when the user
code is entered, a silent alarm is
generated
1
, which could be sent to an
alarm receiving centre. This enables the
user to appear to operate the alarm system
normally if being coerced.
Z
To set up a Duress code, the Duress
1
Outputs of type "Duress Alarm" are activated if the system is being set. Outputs of type "Duress Alarm" or "Panic
Alarm" are activated if the system is being unset.