User`s guide

52
Log Events
Event Description
--- NO EVENT --- Not used
### LECS or REMS The number of LEC or keypads logged on to system after a re-learn
### NODE R# ADD Keypad added to MNode/XNode. First # is the network No. Next ## is the device No. R# is
the keypad No.
### NODE R# LOST Keypad removed from MNode/XNode
### NODE R# TAMP Tamper on keypad attached to MNode/XNode
### NODE'S The number of Nodes logged on to the system after a re-learn
### XNODE'S The number of XNodes logged on to the system after a re-learn
#### OFF TEST Zone number #### taken off test
#### OMITTED Zone number #### omitted
#### REINSTATED Zone number #### reinstated
#,## AUX FAULT Network #, device No. ## MSPSU Aux fuse active
(this record may appear together with “#,## PSU FUSE”)
#,## LEC LOST Network #, device No. ## is a LEC that has been removed
#,## LEC TAMPER Network #, device No. ## is a LEC that has a tamper condition
#,## NODE ADDED Network #, device No. ## is a Node that has been added to the system
#,## NODE FUSE Network #, device No. ## is a Node that has a tripped fuse
#,## NODE LOST Network #, device No. ## is a Node that has been removed
#,## NODE TAMPER Network #, device No. ## is a Node that has a tamper condition
#,## PSU FUSE Network #, device No. ## MSPSU keypad or Network fuse active
#:## PSU TAMP There is a tamper on a smart PSU
#,## REM ADDED Network #, device No. ## is a remote keypad that has been added to the system
#,## REM LOST Network #, device No. ## is a remote keypad that has been removed
#,## REM TAMPER Network #, device No. ## is a remote keypad that has a tamper condition
#:## RF CLEAR Radio node not jammed
#:## RF JAMMED Radio node jammed
#,## XNODE ADDED Network #, device No. ## is a XNode/MNode that has been added to the system
#,## XNODE FUSE XNode/MNode fuse failed
#,## XNODE LOST Network #, device No. ## is a XNode/MNode that has been removed
#,## XNODE TAMP XNode/MNode lid tamper
24 Hr WARDS:- 24 Hour Alarm on wards
24H RESTORE ####- 24 Hour Alarm on zone #### reset
24Hr ALARM #### 24 Hour alarm from zone number ####
24HR OMIT:- 24 Hour group omitted in wards
24HR REINST:- 24 Hour group reinstated in wards
ABORT ON WARDS:- Alarm aborted on wards
ACCESS #### Passcode entered for user number ####
ACCESS FAILED Access failed due to code lock in operation
ACCESS ZONE #### Entry zone #### activated
ALARM #### Alarm from zone number ####
ALARM WARDS: Alarm in wards
ATE L.F. ALL All networks from a communicator to an ARC are unavailable
ATE L.F. RESTORE The network connection from a communicator to an ARC has been restored
ATE L.F. SINGLE A network connection from a dual-path communicator to an ARC is unavailable
AUTOSET # OFF Autoset timer off
AUTOSET # ON Autoset timer on
AUX RESTORE #### Technical alarm from zone number #### reset
BELL TAMPER bell tamper
AUXILIARY #### Technical alarm from zone number ####
AUXILIARY # TAMP Not used
AUXILIARY FUSE Auxiliary Fuse failed
BATTERY FAULT Not used
BATTERY LOAD TST Battery load test carried out
BATTERY LOW Battery voltage is low
BATTERY MISSING Battery is not connected
BATTERY RESTORE Battery restored to healthy condition