Installation guide

4. Administration i-on16
Page 66
1. Make sure the display shows
the standby screen.


2. Press .


3. Key in your access code (or
present a tag).


4. Press  until you see:.


5. Press .
The bottom line of the display
shows:


6. Press  .
The bottom line of the display
shows the current status of the
Chime facility: “On” means the
loudspeakers will sound a
chime tone every time a
detector with the “Chime”
attribute is triggered.


7. Press .
The status of the Chime facility
changes each time you press
.


8. Press  when you have
finished making changes.


Setting the Date and Time
You will need to re-program the date and time if the control unit
loses power for an extended time, and the battery is exhausted.
1. Make sure the display shows
the standby screen.


2. Press .

