Installation guide

Administration
Page 24
Note: If you do not have the device press "NO
TELECOMMAND".
The display shows a list of the registered devices.
Select the device you wish to delete.
The display shows the details of the device you
have selected.
3. Press YES to confirm that you wish to delete the
device.
The control unit will let you delete all telecommands in
one operation. Think carefully before you use this
feature.
1. Enter the User Menu and select System Config -
Telecommand - Delete All.
the display asks you for confirmation.
2. Press Yes.
The control unit "forgets" all telecommands that
were registered to it.
To register telecommands with users once again enter
the User Menu and select Users - Edit User.
Starting a Call To Downloader
Your Installer may be using a personal computer to
program your alarm system remotely. The software the
Installer uses for this purpose is called <Downloader>.
There may be times when your Installer asks you to
make your alarm system start a call out to the Installer's
<Downloader>. Your alarm system is programmed to call
one of two different telephone numbers or one of two
different Internet numbers. You do not have to know
these numbers, your Installer has programmed them for
you, and will tell you which one to select.