Installation guide

Administration
Page 18
Facilities On/Off
You can switch the following facilities on or off:
When you
switch on:
The control unit:
Chime Gives a tone whenever something
triggers a zone programmed with the
Chime attribute.
Voice Prompts Uses a pre-recorded voice message to
announce the setting and unsetting
stages of the system
Activity
Monitor
Monitors zones that the installer has
programmed as Activity Monitor zones.
If nothing triggers these zones for a
specified number of hours then the
control unit raises an alarm. While
Activity Monitoring is on the display
shows a small
icon in the top right
corner.
To switch these one of these facilities on or off:
1. Enter the User Menu and select Facilities On/Off.
2. Select the facility you want to switch on or off.
3. Press CHANGE until the word ON or OFF appears at
the end of the line.
4. Press DONE.