User guide

4. Programming
Page 46 496929
1 +ve Applied to trigger. The inactive output floats. When active the output
goes +ve.
170 - 175: Pulsed Set & Unset Output Options
Use commands 170 to 175 to apply additional options to the output types
pulsed set o/p 1-4 and pulsed unset o/p 1-4.
Example 1: Panel output 3 is programmed with the output type 12 (Pulsed set
o/p 1). This is required to operate a locking mechanism when the system is
set. The locking system requires a pulsed trigger time of 6 seconds
(command 170 - Set o/p 1 is programmed as 06 seconds). This is only to be
applied when the whole system is set. Select level A in command 171 Set
O/p 1).
The programming sequence for the physical panel output no. 3 is:
Command 83 = 12 (Output type - Pulsed Set o/p 1)
Command 170 = (set 1 = 06) seconds
Command 171 = (set 1 = a) level
Example 2: Panel output 3 is programmed with the output type 13 (Pulsed
Unset o/p 1). This is required to operate an unlocking mechanism when the
system is set. The unlocking system requires a pulsed trigger time of 8
seconds (command 172 - Set o/p 1 is programmed as 08 seconds). This is
only to be applied when the whole system is Unset. Select level A in
command 173 Set O/p 1). In addition if a Fire or PA alarm occurs then the
output will be active for the programmed time.
The programming sequence for the physical panel output 3 is: -
Command 83 = 13 (Output type - Pulsed Unset o/p 1)
Command 172 = (set 1 = 08) seconds
Command 173 = (set 1 = a) level
Command 174 = (Fire o/p 1) active if Fire alarm
Command 175 = (PA o/p 1) active if PA alarm
The Pulsed set o/p commands are:
(use tick key to scroll round o/p 1-4)
170 Set o/p 1 Time, select a time in the range 01-12 seconds
Set o/p 2 Time, select a time in the range 01-12 seconds
Set o/p 3 Time, select a time in the range 01-12 seconds
Set o/p 4 Time, select a time in the range 01-12 seconds
171 Set o/p 1 ABCD, select the level(s) in which the output will be active,
toggle abcd keys to select level on /off.
Set o/p 2 ABCD, select the level(s) in which the output will be active
toggle abcd keys to select level on /off.