User guide

4. Special Functions
497100, Issue 4 Page 23
Requiring User Code before Installer Code
You can specify that a user code must be entered before the installer code to
access the installer menu. This enables you to supervise installer activities.
1. Key in an access code (or present a tag).
2. Press 3 to toggle between requiring and
not requiring a user code.
The display shows (for example):
UserCode req=OFF
When you turn user code on or off, the
keypad confirms with a double "beep".
3.
Press y.
Reading the Log
The system keeps a log of the last 700 events. The Appendix on page 30
explains the meaning of the messages that may be logged.
To view the log:
1. Key in an access code (or present a tag).
2. Press 5.
The display shows a message describing the
most recent event (here, for example, user 1 has
changed the access code for user 2):
U01 Change U02
00:42:05 20/08
3. Press: 1 to see earlier events
3 to see later events
4 to see the first event
6 to see the last event
4.
Press X to stop using the log.
Note: Neither an installer nor a user can erase the log.
In the log, user codes are represented by numbers as follows:
U00 Installer U54 Telecommand
U01 User 1 U55 Keyswitch
U02 to U49/50 Users 2 to 49/50 U56 Remote reset
U50 Guard code (if set up) U57 Download
U51 Duress code
U52 Control unit
U58
Virtual keypad
(Downloader)
U53 Idle U59 Forbikobler