User guide

4. Special Functions
Page 20 497100, Issue 4
Control Unit Calling Downloader
Your installer may set up your alarm system using a program called
Downloader, running on a computer connected to the telephone network, and
ask you to instruct your alarm system to make an outgoing call to Downloader
using one of two numbers programmed into the control unit. To start the call:
1. Key in an access code (or present a tag).
2. Press 0.
The display shows:
Call CS ?
3.
Press 1 or 2 (your installer will specify) and then y
The display shows:
Remote PC _
In Progress
Your system calls your installer's computer and
may be connected for several minutes. While
Downloader is connected, the keypad display
shows the time and date.
Downloader Calling Control Unit
Your Installer may ask you to authorise an incoming call from Downloader to
your alarm system. To do this:
1. Key in an access code (or present a tag).
2. Press 0.
The display shows:
Call CS ?
3.
Press B and then y.
The display shows:
Remote PC _
In Progress
The installer's computer calls your system and
may be connected for several minutes. While
Downloader is connected, the keypad display
shows the time and date.
Note: If you connect a computer with Downloader
directly to the control unit by a cable then you
must authorise the connection by pressing A in
step 3 above.