Operator`s manual

51
Record/Play Voice Messages
These Remote Access commands allow you to record and playback voice
messages 1 - 8 through your telephone handset.
These commands are only available if the ‘Remote Access Code’ option is
enabled (see page 27).
To Record/Play a Voice Message:
Establish a Remote Access connection with the SD2.
To record a Voice Message press [*] 4 followed by the message number
1 to 8 on your telephone. You will hear a short beep. Talk clearly into
your telephone handset.
Press 0 on your telephone to stop the recording mode.
To play a voice message press 4 followed by the message number 1 to
8 on your telephone. The selected message is played back through your
telephone handset.
Press 0 on your telephone if you want to cancel playback mode or wait
until the message has finished playing.
Use your telephone to select other Remote Access commands or press [#]
to hang-up the connection with the SD2.
Record/Playback Memo
These Remote Access commands allow you to record and playback the
memo message through your telephone handset.
To Record/Playback a Memo:
Establish a Remote Access connection with the SD2.
To record a new memo press * 0 on your telephone. You will hear a short
beep. Talk clearly into your telephone handset.
Press 0 on your telephone to stop the recording mode.
To play back the memo press 0 on your telephone. The memo message is
played back through your telephone handset.
Press 0 on your telephone if you want to cancel playback mode or wait
until the memo has finished playing.
Use your telephone to select other Remote Access commands or press #to
hang-up the connection with the SD2.