Operator`s manual

5. Repeat steps 3 and 4 for further triggers or press ] to exit this menu.

There is a further advanced option that allows a ‘Restore message’ to be

sent when a trigger input returns to its normal state i.e. when the alarm

system has been reset after an alarm activation.

Edit Restore Routing:

From the Edit Call Routing Option menu press either the ¬ or ¦

keys until

the display shows the Trigger Restore.

1. Press [ to select:

2. Scroll with the ¬ and ¦

keys to select which message requires editing

e.g. C.

3. The display shows that Message C will not send a Restore message to

any of the telephone numbers. To enable this feature select which

telephone numbers require the Restore message by pressing 1~0 where

0 equates to 10.

Repeat steps 2 and 3 for further triggers or press ] to exit this menu.