Operator`s manual

30
2. Scroll with the ¬ and ¦
keys to select the required Clear By option
followed by [. Press] to exit this menu.
Output Options
The SD2 has two programmable outputs that can be accessed remotely
and used for a wide variety of functions. Each output can be programmed
to one of the following functions, e.g. switching on lighting or
heating/ventilation systems.
OFF:
The output remains off at all times.
Memo Waiting:
This output type activates when the SD2 has a Message waiting and de-
activates once the Message has been played.
Remote Access:
This output activates when the SD2 is being accessed remotely with a
touch-tone telephone. The output de-activates when call has finished.
Temperature High:
This output activates when the Temperature High setting has been
reached. The output de-activates once the temperature falls below the
preset temperature (see page 25).
Temperature Low:
This output activates when the Temperature Low setting has been reached.
The output de-activates once the temperature rises above the preset
temperature (see page 25).
Listen Active:
This output type activates when the SD2 is using the Listen In feature (see
page 50).
Speech Active:
This output type activates when the SD2 is using the Talk Back feature
(see page 50).