Operator`s manual

System Options

Editing the System Options Menu

From the main menu press ¬and ¦

or 3 to select the following system

options:

1. Press [ to select:

2. Press [ to edit. From this menu press the ¬or ¦ keys to select the

following options: -

Remote Option:

If enabled (ON) the SD2 will allow remote access through the telephone

network. (See page 48).

If disabled (OFF) the SD2 will not allow remote access (default).

Trigger Polarity:

The SD2 can configure either to have a negative applied trigger (default) or

positive applied trigger (+).

Rings to Answer:

This option allows remote accessibility to the SD2 (see page 48) by

answering all incoming calls after the number of predetermined rings

(defaulted to 10 rings). The range is from ‘Never’ (Remote Access Option

Disabled) to 20 rings.

Auto Reporting:

If enabled the SD2 will automatically call any programmed numbers in

‘Route Auto Rep.’ Menu – every 24 hours. (See page 35) and send

message 2. The ‘report time’ can be adjusted to the hour required. See

Report Time on page 24. (Default to OFF)