User's Manual

European Version
To connect Receiver to your TV:
1. Plug the Scart connector cable that package
included into your TV.
2. Plug the other end, yellow (video), white (audio)
and red (audio) RCA connectors into the
corresponding RCA connectors on the Receiver.
(FIGURE 21)
Power
ON/OFF
AUDIO(Red)
Antenna
DC JACK
Adapter
Scart Plug
AUDIO(White) VIDEO(Yellow)
FIGURE 21
9
American Version
To connect Receiver to your TV:
1. Plug the yellow (video), white (audio) and red
(audio) RCA connectors into TV socket.
2. Plug the yellow (video), white (audio) and red
(audio) RCA connectors into the corresponding
RCA connectors on the Receiver. (FIGURE 22)
(Red)
(Yellow)
(White)
VIDEO(Yellow) AUDIO(White) AUDIO(Red)
Power
ON/OFF
Antenna
DC JACK
Adapter
FIGURE 22
OPERATION
1. Connect the Receiver with 9VDC power adapter
and set the Receiver in the same channel as that
of the video device you have planned to view.
2. Power switch: Slide the switch to On position to
turn on the power, while Off position to turn off the
power.
3. Connect the video device with power source and
turn on the TV. Then switch the TV to the video
mode. The video images can be viewed right from
the TV.
4. The Channel LED will light up when the particular
channel is in use.
TROUBLE SHOOTING
Light does not turn on:
z Confirm that you have made a correct “wiring
connection”.
z Make sure that the bulb has not burned out.
Light remains on:
z Make sure the wiring connection is correct.
z If you set the motion sensor to Manual
Override, remember that you must turn the wall
switch off for at least 10 seconds before switch
the motion sensor back to Automatic Operation.
z Check if the TIME setting is correct.
10
SPECIFICATIONS
PIR Lighting Camera Transmitter
Power Requirement
AC 120 V / 60Hz
AC 230 V / 50Hz
Lighting Load Max. 150W Halogen Bulb
PIR Detection Angle
Up to 110° at 20°C
PIR Detection
Distance
Up to 12M at 20°C
Swiveling Angle
Lamp Part: Horizontal 90°,
Downward 30°; Upward 90°
Sensor Part: Horizontal 90°,
Downward 45°, Upward 90°
Mounting Height
Recommended 2M (6.5 Ft) Wall
Mount
Wall Switch Control On / Off / Manual Override
Sensor Operation Auto
Time Adjustment 5”, 1, 5, 10
Lux Adjustment Yes
Warm Up Time About 1 min
Camera Type Color CMOS
TV System PAL/NTSC
Resolution (TV lines) 320
Pixel Array (H x V)
PAL: 628 x 582
NTSC: 510 x 492
Auto Exposure Up to 1/15000 Sec.
Lens f=4.4mm F=2.0
Lens Angle 56°, Diagonal
Sensitivity <3 Lux @F1.2
S/N (Noise) >48dB
Microphone Built-in
2.4GHz Channel
2413MHz / 2432MHz
2451MHz / 2470MHz ± 200KHz
Wireless Receiver Receiver
Power Adapter Input
AC 120V / 60Hz
AC 230V / 50Hz
Power Adapter
Output
9VDC 300mA
Video Output 0.9~1.35Vpp, 75Ω
Communication Max. 100m (in open space)