MAC100_IS_325-1586.
MAC100_IS_325-1586.qxp 10/17/06 2:50 PM Page 2 Congratulations! You have purchased a Cooper Lighting motion activated floodlight. This security lighting system will provide years of convenience and protection for your family and home. How it works 70 feet Your Cooper Lighting motion activated camera and floodlight security system delivers color images and audio through the use of digital wireless technology.
MAC100_IS_325-1586.qxp 10/17/06 2:50 PM Page 3 • Follow all instructions. ENGLISH • Do not use this apparatus near water. • Clean only with a dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. • Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. • Do not defeat the safety purpose of the polarized or grounding-type plug.
MAC100_IS_325-1586.qxp 10/17/06 2:50 PM Page 4 • For maximum bulb life, position fixture so the quartz halogen bulb remains within 4 degrees of horizontal. • Fixture should be installed by persons with experience in household wiring or by a qualified electrician. The electrical system and the method of electrically connecting the fixture to it, must be in accordance with the National Electrical Code and local building codes.
MAC100_IS_325-1586.qxp 10/17/06 2:50 PM Page 5 For best results ENGLISH • Install your fixture 8-12 feet above the ground. • Locate fixture so motion moves across detection zone (L) • Locate fixture away from heat producing sources to prevent false triggering. Also be very careful not to include objects such as windows, white walls and water in the detection zone whenever possible. L • Locate fixture away from moving objects such as trees and street traffic.
MAC100_IS_325-1586.qxp 10/17/06 2:50 PM Page 6 Apply silicone caulking around the edges of coverplate and in any open screw holes for a watertight seal. Step 7: Adjust the antenna upright and vertical to the ground (P). Step 8: Turn power on at main fuse/breaker box. ENGLISH Step 6: How to operate your fixture Step 1: Step 2: Step 3: Make sure motion sensor and wireless receiver are set to the same house code (fixtures will come from factory pre-set to the same code).
10/17/06 2:50 PM Page 7 Note: The LUX Adjustment Knob determines when the floodlight will begin operating. Turn the motion sensor LUX control knob clockwise to the moon (dusk) position. In this setting the floodlight will remain in the OFF position during daylight hours. If you would like the floodlight to turn on early (before dusk), move the knob closer to the position. Note: Time adjustment settings: 5˝ 1 5 10 = = = = 5 seconds 1 minute 5 minutes 10 minutes How to operate Wireless Receiver The 2.
MAC100_IS_325-1586.qxp Step 5: 10/17/06 2:50 PM Page 8 How to select your desired feature Desired Operation: Set Time Adjust Switch To: Wall ON/OFF Switch Setting LUX Control Knob Setting Lights should turn on with motion only at night and should turn off after 1, 5 or 10 minutes. AUTO 1, AUTO 5 or AUTO 10 Keep the power to the fixture on. Auto setting between Lights should stay on from dusk to dawn and then reset to the auto setting next dawn.
MAC100_IS_325-1586.qxp 10/17/06 2:50 PM Page 9 ENGLISH What to do if… OUTDOOR LIGHT DOES NOT COME ON WITH MOTION AT NIGHT Is there power to the fixture? • Check to see that the circuit breaker has not been tripped. • Be sure the wall switch is in the “ON” position. • Be sure the bulb is not burned out or broken. Is the surrounding ambient light too bright? (If so, the unit may think it is daytime). • Re-aim the head. • Relocate or reposition the unit away from the light.
MAC100_IS_325-1586.qxp 10/17/06 2:50 PM Page 10 Two Year Limited Warranty Customer First Center 1121 Highway 74 South, Peachtree City, GA 30269 www.cooperlighting.com Patent Pending © 2006 Cooper Lighting Reproductions of this document without prior written approval of Cooper Lighting are strictly prohibited.
