Specifications

6" Incandescent
94
DIMENSIONS
DESCRIPTION
The EI700ATNB is designed for
installations where it will be in
direct contact with insulation.
These housings are designed to
save installation time. They are
designed without a socket plate for
use with socket supporting trims
only. There is no need to spend
time adjusting or disconnecting
the socket and removing the
socket plate. AIR-TITE design
meets restricted airflow
requirements.
Housing
• Aluminum construction for
greater heat dissipation.
• AIR-TITE gasket is
pre-installed.
Plaster Frame
• Housing adjusts in plaster
frame 1" to accommodate
different ceiling thicknesses.
• Regressed locking screw for
securing hanger bars.
• Cutouts for easily crimping
hanger bars in position.
Junction Box
• Positioned to accommodate
straight conduit runs.
• Seven conduit knockouts are
uniform 1/2" size with true
pryout slots.
• Four pryouts with integral
strain relief simplify “NM”
non-metallic sheathed cable
installation.
• Three quick connect wire
connectors included.
ALL-NAIL™ Bar Hangers
Bar Hanger features include:
• Pre-installed nail.
• Mini leveling foot aligns the
housing to the bottom of the
joist.
• Housing can be positioned at
any point within 24” joist spans
• Score lines allow tool-free
shortening for narrow joist
spacing.
• Bar hangers may be
repositioned 90° on plaster
frame
• Integral T-bar clip snaps onto
T-bars – no additional clips are
required
Socket
Porcelain E26 socket with nickel
plated brass screw shell.
Thermal Protector
Self resetting thermal protector
deactivates fixture if overheating
occurs due to improper lamping.
Labels
• UL/cUL Listed 1598 Luminaire
• UL/cUL Listed for Damp Location
• UL/cUL Listed for Feed Through
• UL/cUL Listed for Wet Location,
covered ceiling
• UL/cUL Listed for Direct Contact
with Insulation and combustible
material
IC and AIR-TITE™
May be used to meet insulated
ceiling and restricted air-flow
requirements such as:
• Washington State Energy Code
• International Energy
Conservation Code (IECC)
• New York State Energy
Conservation Construction
Code (NY-ECCC)
• State of California Title 24
“Recessed Luminaires in
Insulated Ceilings.”
Note: Some units may have
different features.
Visit www.cooperlighting.com for more information on the complete ALL-PRO Stock and
Specification offering. Product availability subject to change without notice.
6-1/2"
[165mm]
7"
[178mm]
1/2"
[13mm]
10-1/2"
[267mm]
7-1/2"
[191mm]
EI700ATNB
6˝ Aperture, IC,
New Construction, AIR-TITE,
120V Line Voltage,
No Socket Bracket
Specifications
• Thermally protected
IC housing
• AIR-TITE housing prevents
airflow between attic and
living areas
• Housing may be covered
with insulation
• For use with 120V
incandescent lamps
• “NB” no socket bracket
housing saves installation
time with fixed socket
position on trims and quick
wiring connectors in the
junction box.