Specifications

6" Incandescent
92
DIMENSIONS
DESCRIPTION
The EI700AT housing is designed
for use in insulated ceilings
where the housing will be in
direct contact with insulation
material. AIR-TITE design meets
restricted airflow requirements.
Housing
• Aluminum construction for
greater heat dissipation.
• AIR-TITE gasket is
pre-installed.
Socket Plate
• Rigid socket plate adjusts and
locks without tools for various
lamp sizes.
Plaster Frame
• Housing adjusts in plaster
frame 1" to accommodate
different ceiling thicknesses.
• Regressed locking screw for
securing hanger bars.
• Cutouts for easily crimping
hanger bars in position.
Junction Box
• Positioned to accommodate
straight conduit runs.
• Seven conduit knockouts are
uniform 1/2" size with true
pryout slots.
• Four pryouts with integral
strain relief simplify “NM”
non-metallic sheathed cable
installation.
• Three quick connect wire
connectors included.
ALL-NAIL™ Bar Hangers
Bar Hanger features include:
• Pre-installed nail.
• Mini leveling foot aligns the
housing to the bottom of the
joist.
• Housing can be positioned at
any point within 24” joist spans
• Score lines allow tool-free
shortening for narrow joist
spacing.
• Bar hangers may be
repositioned 90° on plaster
frame
• Integral T-bar clip snaps onto
T-bars – no additional clips are
required
Socket
Porcelain E26 socket with nickel
plated brass screw shell.
Thermal Protector
Self resetting thermal protector
deactivates fixture if overheating
occurs due to improper lamping.
Labels
• UL/cUL Listed 1598 Luminaire
• UL/cUL Listed for Damp Location
• UL/cUL Listed for Feed Through
• UL/cUL Listed for Wet Location,
covered ceiling
• UL/cUL Listed for Direct Contact
with Insulation and combustible
material
IC and AIR-TITE™
Certified under ASTM-E283 and
listed UL/cUL 1598. May be used
to meet insulated ceiling and re-
stricted air-flow requirements
such as:
• Washington State Energy Code
• International Energy
Conservation Code (IECC)
• New York State Energy
Conservation Construction
Code (NY-ECCC)
• State of California Title 24
“Recessed Luminaires in
Insulated Ceilings.”
Note: Some units may have
different features.
Visit www.cooperlighting.com for more information on the complete ALL-PRO Stock and
Specification offering. Product availability subject to change without notice.
7"
[178mm]
1/2"
[13mm]
6-1/2"
[165mm]
10-1/2"
[267mm]
7-1/2"
[191mm]
EI700AT
6˝ Aperture, IC,
New Construction, AIR-TITE,
120V Line Voltage
Specifications
• Thermally protected
IC housing
• AIR-TITE housing prevents
airflow between attic and
living areas
• Housing may be covered
with insulation
• For use with 120V
incandescent lamps