Specifications

5" Incandescent
87
DIMENSIONS
DESCRIPTION
EI500AT
5˝ Aperture, IC,
New Construction, AIR-TITE,
120V Line Voltage
Specifications
• Thermally protected IC
housing
• AIR-TITE housing
prevents airflow
between attic and
living areas
• Housing may be
covered with insulation
• For use with 120V
incandescent lamps
The All-Pro 500 series has a 5"
aperture designed for PAR20 and
PAR30 halogen lamps. EI500AT is
designed for use in insulated
ceilings and may be completely
covered in insulation. AIR-TITE™
design meets restricted air flow
requirements.
Housing
• Die-stamped CRS with white
powder coat finish.
• Housing adjusts in plaster frame
to accommodate ceiling up to
1-3/8" thick.
• AIR-TITE gasket is pre-installed.
Plaster Frame
• Galvanized steel construction.
• The housing can be removed
from plaster frame to provide
access to the junction box.
• Regressed locking screw for
securing hanger bars
• Cutouts for easily crimping
hanger bars in position
Junction Box
• Positioned to accommodate
straight conduit runs.
• Seven conduit knockouts are
uniform 1/2" size with true pryout
slots.
• Four pryouts with integral strain
relief simplify “NM” non-metallic
sheathed cable installation.
• Three quick connect wire
connectors included
ALL-NAIL™ Bar Hangers
Bar Hanger features include:
• Pre-installed nail.
• Mini leveling foot aligns the
housing to the bottom of the joist.
• Housing can be positioned at any
point within 24” joist spans
• Score lines allow tool-free
shortening for narrow joist
spacing.
• Bar hangers may be repositioned
90° on plaster frame
• Integral T-bar clip snaps onto
T-bars – no additional clips are
required
Socket
Porcelain E26 socket with nickel
plated brass screw shell, snaps into
trim for consistent lamp
positioning.
Thermal Protector
Self resetting thermal protector
deactivates fixture if overheating
occurs due to improper lamping or
misapplied insulation.
Labels
• UL/cUL Listed 1598 Luminaire
• UL/cUL Listed for Damp Location
• UL/cUL Listed for Feed Through
• UL/cUL Listed for Wet Location,
covered ceiling
• UL/cUL Listed for Direct Contact
with Insulation and combustible
material
IC and AIR-TITE™
Certified under ASTM-E283 and
listed UL/cUL 1598. May be used to
meet insulated ceiling and
restricted air-flow requirements
such as:
• Washington State Energy Code
• International Energy Conservation
Code (IECC)
• New York State Energy
Conservation Construction Code
(NY-ECCC)
• State of California Title 24
“Recessed Luminaires in
Insulated Ceilings.”
Note: Some units may have
different features.
Visit www.cooperlighting.com for more information on the complete ALL-PRO Stock and
Specification offering. Product availability subject to change without notice.
14"
[356mm]
6"
[152mm]
5-1/2"
[140mm]
7"
[178mm]
1/2"
[13mm]
5-3/4"
[146mm]
7"
[178mm]
1/2"
[13mm]
10-1/2"
[267mm]
7"
[178mm]
DIMENSIONS
DESCRIPTION
EI500RAT
5" Aperture, IC, Remodel,
AIR-TITE, 120V Line Voltage
Specifications
• Thermally protected IC
AIR-TITE housing
prevents airflow
between attic and
living areas
• Housing may be
covered with insulation
• For use with 120V
incandescent lamps
• For installation from
below the ceiling
The All-Pro 500 series has a 5"
aperture designed for PAR20 and
PAR30 halogen lamps. Designed for
use in insulated existing ceilings
and may be completely covered in
insulation. AIR-TITE design meets
restricted airflow requirements.
Housing
• Die-stamped CRS with white
powder coat finish.
• Integral flange secures fixture
against ceiling.
• AIR-TITE gasket is pre-installed.
Remodel Clips
Four remodel clips secure housing
and accommodate 1/2" and 5/8"
ceiling thickness.
Junction Box
• Seven conduit knockouts are
uniform 1/2" size with true
pryout slots.
• Four pryouts with integral strain
relief simplify “NM” non-metallic
sheathed cable installation.
• Three quick connect wire
connectors included.
Socket
Porcelain E26 socket with nickel
plated brass screw shell, snaps
into trim for consistent lamp
positioning.
Thermal Protector
Self resetting thermal protector
deactivates fixture if overheating
occurs due to improper lamping or
misapplied insulation.
Labels.
• UL/cUL Listed 1598 Luminaire
• UL/cUL Listed for Damp Location
• UL/cUL Listed for Feed Through
• UL/cUL Listed for Wet Location,
covered ceiling
IC and AIR-TITE™
Certified under ASTM-E283 and
listed UL/cUL 1598. May be used
to meet insulated ceiling and
restricted air-flow requirements
such as:
• Washington State Energy Code
• International Energy Conservation
Code (IECC)
• New York State Energy
Conservation Construction Code
(NY-ECCC)
• State of California Title 24
“Recessed Luminaires
in Insulated Ceilings.”
Ceiling opening to match template supplied