Specifications

5" Incandescent
86
DIMENSIONS
DESCRIPTION
The All-Pro 500 series utilizes a 5"
aperture designed for smaller
sized PAR20 and PAR30 halogen
lamps. The 5" diameter trim size
makes this series the right choice
for applications where dramatic
yet inconspicuous lighting is
required. For use in
non-insulated ceilings. If ceiling
insulation is present, it must be
kept 3" from the fixtures on all
sides.
Housing
• Die-stamped CRS with white
powder coat finish.
• Housing adjusts in plaster
frame to accommodate ceiling
up to 1-3/8" thick.
Plaster Frame
• Galvanized steel construction.
• The housing can be removed
from plaster frame to provide
access to the junction box.
• Regressed locking screw for
securing hanger bars
• Cutouts for easily crimping
hanger bars in position
Junction Box
• Positioned to accommodate
straight conduit runs.
• Seven conduit knockouts are
uniform 1/2” size with true
pryout slots.
• Four pryouts with integral
strain relief simplify “NM”
non-metallic sheathed cable
installation.
• Three quick connect wire
connectors included.
ALL-NAIL™ Bar Hangers
Bar Hanger features include:
• Pre-installed nail.
• Mini leveling foot aligns the
housing to the bottom of the
joist.
• Housing can be positioned at
any point within 24” joist spans
• Score lines allow tool-free
shortening for narrow joist
spacing.
• Bar hangers may be
repositioned 90° on plaster
frame
• Integral T-bar clip snaps onto
T-bars – no additional clips are
required
Socket
Porcelain E26 socket with nickel
plated brass screw shell, snaps
into trim for consistent lamp
positioning.
Thermal Protector
Self resetting thermal protector
deactivates fixture if overheating
occurs due to improper lamping
or misapplied insulation.
Labels
• UL/cUL Listed 1598 Luminaire
• UL/cUL Listed for Damp Location
• UL/cUL Listed for Feed Through
• UL/cUL Listed for Wet Location,
covered ceiling
• IP Rated (Improper Lamp)
Note: Some units may have
different features.
Visit www.cooperlighting.com for more information on the complete ALL-PRO Stock and
Specification offering. Product availability subject to change without notice.
DIMENSIONS
DESCRIPTION
The All-Pro 500 series utilizes a
5" aperture designed to
accommodate smaller sized
PAR20 and PAR30 halogen lamps.
The 5" diameter trim size makes
the ET500R the right choice for
applications where dramatic
yet inconspicuous lighting is
required in an existing ceiling.
For use in non-insulated ceilings.
If ceiling insulation is present, it
must be kept 3" from the fixtures
on all sides.
Housing
• Die-stamped CRS with white
powder coat finish.
• Integral flange secures fixture
against ceiling.
• For installation from below the
finished ceiling.
Remodel Clips
Four remodel clips secure
housing and accommodate
1/2" and 5/8" ceiling thickness.
Junction Box
• Seven conduit knockouts are
uniform 1/2' size with true
pryout slots.
• Four pryouts with integral
strain relief simplify “NM”
non-metallic sheathed
cable installation.
Socket
Porcelain E26 socket with nickel
plated brass screw shell, snaps
into trim for consistent lamp
positioning.
Thermal Protector
Self resetting thermal protector
deactivates fixture if overheating
occurs due to improper lamping
or misapplied insulation.
Labels
• UL/cUL Listed 1598 Luminaire
• UL/cUL Listed for Damp Location
• UL/cUL Listed for Feed Through
• UL/cUL Listed for Wet Location,
covered ceiling
• IP Rated (Improper Lamp)
5-3/4"
[146mm]
7"
[178mm]
1/2"
[13mm]
10-1/2"
[267mm]
7"
[178mm]
5-1/2"
[140mm]
7"
[178mm]
1/2"
[13mm]
14"
[356mm]
6"
[152mm]
ET500
5" Aperture, Non-IC,
New Construction,
120V Line Voltage
Specifications
• Non-IC housing
• May be used in insulated
ceilings but insulation
MUST be kept 3" from all
sides of fixture
• For use with 120V
incandescent lamps
ET500R
5" Aperture, Non-IC, Remodel,
120V Line Voltage
Specifications
• Thermally protected Non-
IC housing
• May be used in insulated
ceilings but insulation
MUST be kept 3" from all
sides of fixture
• For use with 120V
incandescent lamps
• Can be installed from
below the ceiling
Ceiling opening to match template supplied