Specifications

ManualsBrandsCooper Lighting ManualsWork LightFCTS130

Visit www.cooperlighting.com for more information on the complete ALL-PRO Stock and

Specification offering. Product availability subject to change without notice.

Wide Trim Selection

• Trim retention system choices include:

- Torsion springs

- Friction clips

- Coil springs

• Many trims available in choice of

torsion springs or friction clips.

Note: Some units may have

different features.

All-Pro Recessed

Trims

Contractor Friendly Trim Rings

• All-Pro trims feature an extra wide trim ring.

• Helps hide any cutout irregularities.

• ERT707 and ERT709 trims in white and black

baffle include both narrow style and wide

style trim ring - use one, discard the other.

High Gloss Appliance White Finish

• Fingerprints don’t show.

• Easy to clean.

• Matches appliances.

• Matches electrical devices - wall plates,

switches etc.

• Wide choice of AIR-TITE housings and trims to meet state codes as qualified per

test standard ASTM-E283.

• Meets AIR-TITE Code standards such as: California Title 24, IECC, New York - ECC,

Washington State EC

• AIR-TITE

housings have pre-installed gasket

AIR-TITE

™

• “No-Socket-Bracket” housings and socket supporting

trims speed installation of multiple units.

• Provides consistent lamp position in multiple units.

“No-Socket-Bracket” System

• Patented regressed screw locks hanger bars in position - regressed

design does not interfere with ceiling material.

• Screw can be tightened with slotted or phillips screwdriver or nut driver.

• Five bar hanger locking points on the frame allow the downlight to stay

in place during drywalling.

Regressed Locking Screw and Multiple Crimp Points Junction Box with Push-In Wire Connectors

• Push-in wire connectors speed installation - simply strip and insert

supply wires into connectors. No additional wire nuts are required.

• Standard on most ALL-PRO housings.

• Integral wire traps for non-metallic sheathed cable - no additional

connectors necessary.

• Pry-out (knockouts) for metallic cable and rigid conduit connectors.

• Rated for through branch circuit wiring.