Specifications

Floodlights
22
3-3/4" [95mm]
1-7/8"
[48mm]
9/16" [14mm]
dia. hole (2)
7/8" [22mm]
dia. hole
1"
[25mm]
20-1/2" [521mm]
SLIPFITTER
150-400W HPS & MH, 1000W HPS
9 1/2" [241mm]
1000W MH
10 1/2" [267mm]
18-1/2"
[470mm]
27-1/2"
[699mm]
20-1/2" [521mm]
18-1/2"
[470mm]
22-1/2"
[572mm]
YOKE
150-400W HPS & MH, 1000W HPS
9-1/2" [241mm]
1000W MH
10-1/2" [267mm]
Area
Floodlight
NIGHTHAWK III
Area
Floodlight
NIGHTHAWK III
Double Side Visor (SV/NK)
Visor provides additional cutoff and glare
control, bronze finish. Can be used with Top
or Bottom Visor (TV/NK)
Photocontrol (OA/RA1016)
Twistlock photoelectric control,
105-285V NEMA Type
Photocontrol (OA/RA1027)
Twistlock photoelectric control,
480V NEMA Type
Trunnion Yoke Slipfitter (TYS-BZ)
Adaptable slipfitter for 2-3/8", 3", or
3-1/2" tenon with 3/4" NPS hole,
bronze finish
Top or Bottom Visor (TV/NK)
Provides additional cutoff and glare
control, bronze finish
0
1
2
3
4
A
B
C
D
E
SET
BACK
Each block of grid = set back distance x set back distance
Photometry
Set back Footcandle Value for Isofootcandle lines
AB C D E
20' 10.00 5.00 2.00 1.00 .50
25' 6.40 3.20 1.28 .64 .32
30' 4.40 2.20 .88 .44 .55
35' 3.27 1.64 .65 .33 .16
Multiplier
Watts HPS MH/MP
400 1.39 1.00
1000 3.89 3.06
YOKE DETAIL
Example of 400W MP at 20ft. set back with a 45° tilt, 40,000 lumen clear lamp
Applications
Accent • Facade • Recreation •
Retail • Roadway • Security •
Sign • Sports • Transportation
Specifications
• EISA Compliant
• Heat- and impact-resistant
tempered glass mounts flush
to die-cast aluminum door
surface to reduce wind drag
and prevent accumulation of
dirt or moisture
• Die-cast aluminum door frame
with integral cast hinges
• Heavy-duty corrosion-resistant
die-cast aluminum housing
with bronze polyester, powder
coat finish
• Integral stamped steel ballast
mounting bracket
• Formed aluminum flush
draw-action latches offer
easy tool-less access to lamp
compartment
• Mogul-base porcelain lamp
socket
• Lamp included. Available in
400W and 1000W HPS,
MH or MP
• Heavy-duty steel yoke provides
flexibility in mounting from a
variety of surfaces (specify Y)
• Integral die-cast aluminum
slipfitter fits 2-3/8" or 3" O.D.
tenon. Cast-in degree marked
in quadrant for easy and
accurate aiming (specify S)
• U.L. listed for wet ground
mount locations. CSA certified
• E.P.A. = 2.7
• Approx. net weight: 55 lbs.
(25 kgs.)
Accessories
400-1000W High Pressure Sodium
400W Pulse Start Metal Halide
1000W Probe Start Metal Halide
Visit www.cooperlighting.com for more information on the complete Lumark Stock and
Specification offering. Product availability subject to change without notice.