Specifications

6" Incandescent
DIMENSIONS
DESCRIPTION
ET4700
6" Aperture, Non-IC,
New Construction,
Slope Ceiling,
120V Line Voltage
Specifications
• Non-IC housing
• May be used in
insulated ceilings but
insulation MUST be
kept 3" from all sides
of fixture
• For use with 120V
incandescent lamps
• Slope ceiling housing
for 2/12 to 6/12 slope
ceilings
Designed for sloped ceiling
installations for ceilings from
2/12 to 6/12 pitch. The socket
aiming mechanism allows the
lamp to be aimed straight down
regardless of ceiling pitch. For
use in non-insulated ceilings. If
ceiling insulation is present, it
must be kept 3 inches from all
sides of housing.
Housing Features
• Telescoping housing for ceiling
construction down to 2”x 8”.
With deeper ceilings the
housing provides sharper
cutoff.
• Exclusive socket aiming
mechanism swivels and rotates
to properly align lamp. Slope
indicator provides quick and
consistent lamp settings
(factory set for 3/12 slope).
• One piece seamless baffle
presents a clean finished
appearance
• Thermal protector guards
against misuse of insulation
materials
Junction Box
• Positioned to accommodate
straight conduit runs.
• Seven conduit knockouts are
uniform 1/2" size with true
pryout slots.
• Four pryouts with integral
strain relief simplify “NM”
non-metallic sheathed cable
installation.
• Three quick connect wire
connectors included.
ALL-NAIL™ Bar Hangers
Bar Hanger features include:
• Pre-installed nail.
• Mini leveling foot aligns the
housing to the bottom of the
joist.
• Housing can be positioned at
any point within 24” joist spans.
• Score lines allow tool-free
shortening for narrow joist
spacing.
• Bar hangers may be
repositioned 90° on plaster
frame.
• Integral T-bar clip snaps onto
T-bars – no additional clips are
required
Socket
Porcelain E26 socket with nickel
plated brass screw shell, snaps
into trim for consistent lamp
positioning.
Listings
• UL/cUL Listed 1598 Luminaire
• UL/cUL Listed for Damp Location
• UL/cUL Listed for Feed Through
115
6-1/2" to 8-3/4"
[165 to 222mm]
1/2"
[13mm]
5-1/4"
[133mm]
6-3/4"
[171mm]
14-3/4"
[375mm]
10-1/2"
[267mm]
ERT4980
Baffle
• One piece seamless baffle
• Baffle ridges are parallel to floor
plane
ERT4980WHT
High Gloss Appliance White
Trim with White Baffle
Aperture:
5-1/4" [133mm]
OD:
8" [203mm]
ET4700
90W PAR38
Note: Some units may have
different features.
Visit www.cooperlighting.com for more information on the complete ALL-PRO Stock and
Specification offering. Product availability subject to change without notice.