Specifications

6" Incandescent
109
DIMENSIONS
DESCRIPTION
EI2700AT
6" Aperture, IC,
Shallow Ceiling,
New Construction, AIR-TITE,
120V Line Voltage
Specifications
• Thermally protected
IC housing
• AIR-TITE housing
prevents airflow
between attic and
living areas
• Housing may be
covered with insulation
• For use with 120V
incandescent lamps
The EI2700AT housing is
designed for use in shallow
ceilings where insulation is
present. AIR-TITE design and
meets restricted airflow
requirements.
Housing
• Aluminum construction for
greater heat dissipation.
• AIR-TITE gasket is
pre-installed.
Socket Plate
• Rigid socket plate adjusts and
locks without tools for various
lamp sizes.
Plaster Frame
• Housing adjusts in plaster
frame 1" to accommodate
different ceiling thicknesses.
• Regressed locking screw for
securing hanger bars.
• Cutouts for easily crimping
hanger bars in position.
Junction Box
• Positioned to accommodate
straight conduit runs.
• Seven conduit knockouts are
uniform 1/2" size with true
pryout slots.
• Four pryouts with integral
strain relief simplify “NM”
non-metallic sheathed cable
installation.
• Three quick connect wire
connectors included
ALL-NAIL™ Bar Hangers
Bar Hanger features include:
• Pre-installed nail.
• Mini leveling foot aligns the
housing to the bottom of the
joist.
• Housing can be positioned at
any point within 24" joist spans.
• Score lines allow tool-free
shortening for narrow joist
spacing.
• Bar hangers may be
repositioned 90° on plaster
frame.
• Integral T-bar clip snaps onto
T-bars – no additional clips are
required
Socket
Porcelain E26 socket with nickel
plated brass screw shell.
Thermal Protector
Integral Thermal Protector
deactivates fixture if an
incorrect lamp is used or if
ceiling insulation material is
not applied correctly.
Labels
• UL/cUL Listed 1598 Luminaire
• UL/cUL Listed for Damp Location
• UL/cUL Listed for Feed Through
• UL/cUL Listed for Wet Location,
covered ceiling
• UL/cUL Listed for Direct Contact
with Insulation and combustible
material
IC and AIR-TITE™
Certified under ASTM-E283 and
listed UL/cUL 1598. May be used
to meet insulated ceiling and
restricted air-flow requirements
such as:
• Washington State Energy Code
• International Energy
Conservation Code (IECC)
• New York State Energy
Conservation Construction
Code (NY-ECCC)
• State of California Title 24
“Recessed Luminaires in
Insulated Ceilings.”
Note: Some units may have
different features.
Visit www.cooperlighting.com for more information on the complete ALL-PRO Stock and
Specification offering. Product availability subject to change without notice.
6-1/2"
[140mm]
5"
[127mm]
1/2"
[13mm]
10-1/2"
[267mm]
7-1/2"
[191mm]