Specifications

6" Incandescent
108
DIMENSIONS
DESCRIPTION
The EI2700 housing is designed
for use in shallow ceilings. The
EI2700 is designed for shallow
ceilings and direct contact with
insulation.
Housing
• Aluminum construction for
greater heat dissipation.
Socket Plate
• Rigid socket plate adjusts and
locks without tools for various
lamp sizes.
Plaster Frame
• Galvanized steel construction.
• Housing adjusts in plaster
frame 1-3/8" to accommodate
different ceiling thicknesses
• Regressed locking screw for
securing hanger bars
• Cutouts for easily crimping
hanger bars in position.
Junction Box
• Positioned to accommodate
straight conduit runs.
• Seven conduit knockouts are
uniform 1/2" size with true
pryout slots.
• Four pryouts with integral
strain relief simplify “NM”
non-metallic sheathed
cable installation.
• Three quick connect wire
connectors included.
ALL-NAIL™ Bar Hangers
Bar Hanger features include:
• Pre-installed nail.
• Mini leveling foot aligns the
housing to the bottom of the
joist.
• Housing can be positioned at
any point within 24” joist spans
• Score lines allow tool-free
shortening for narrow joist
spacing.
• Bar hangers may be
repositioned 90° on plaster
frame
• Integral T-bar clip snaps onto
T-bars – no additional clips are
required
Socket
Porcelain E26 socket with nickel
plated brass screw shell.
Thermal Protector
Integral Thermal Protector
deactivates fixture if an
incorrect lamp is used or if
ceiling insulation material is
not applied correctly
Labels
• UL/cUL Listed 1598 Luminaire
• UL/cUL Listed for Damp Location
• UL/cUL Listed for Feed Through
• UL/cUL Listed for Wet Location,
covered ceiling
• UL/cUL Listed for Direct Contact
with Insulation and combustible
material
Note: Some units may have
different features.
Visit www.cooperlighting.com for more information on the complete ALL-PRO Stock and
Specification offering. Product availability subject to change without notice.
DIMENSIONS
DESCRIPTION
The EI2700R housing is designed
for remodeling use in existing
shallow ceilings. The EI2700R
housing is designed for shallow
ceilings and direct contact with
insulation. For installation from
below the finished ceiling.
Housing
• Aluminum construction for
greater heat dissipation.
Socket Plate
• Rigid socket plate adjusts and
locks without tools for various
lamp sizes.
Remodel Clips
Four remodel clips secure housing
and accommodate 1/2" and 5/8"
ceiling thickness.
Junction Box
• Seven conduit knockouts are
uniform 1/2" size with true
pryout slots.
• Four pryouts with integral
strain relief simplify “NM”
non-metallic sheathed cable
installation.
• Three quick connect wire
connectors included
Socket
Porcelain E26 socket with nickel
plated brass screw shell.
Thermal Protector
Integral Thermal Protector
deactivates fixture if an
incorrect lamp is used or if
ceiling insulation material is
not applied correctly.
Labels
• UL/cUL Listed for Damp
Location
• UL/cUL Listed for Feed Through
• UL/cUL Listed for Wet Location,
covered ceiling
• UL/cUL Listed for Direct Contact
with Insulation and combustible
material
6-1/2"
[140mm]
5"
[127mm]
1/2"
[13mm]
10-1/2"
[267mm]
7-1/2"
[191mm]
5"
[127mm]
1/2"
[13mm]
6-1/4"
[159mm]
13-1/4"
[159mm]
6-7/8"
[175mm]
EI2700
6˝ Aperture, IC,
Shallow Ceiling,
New Construction,
120V Line Voltage
Specifications
• Thermally protected
IC housing
• Housing may be covered
with insulation
• For use with 120V
incandescent lamps
EI2700R
6" Aperture, IC,
Shallow Ceiling,
Remodel,
120V Line Voltage
Specifications
• Thermally protected
IC housing
• Housing may be covered
with insulation
• For use with 120V
incandescent lamps
• For installation from below
the ceiling
Ceiling opening to match template supplied