Specifications

6" Incandescent
104
DIMENSIONS
DESCRIPTION
The All-Pro EI700U housing is
designed to be used in direct
contact with insulation. The IC
construction allows an unbroken
insulation barrier to be maintained.
EI700U may be converted into
AIR-TITE installation when used
with AIR-TITE trims. Look for the
AIR-TITE trim logo in this section.
Housing
• Double wall aluminum
construction for greater heat
dissipation.
• Double wall housing allows
higher wattages on select trims
than single wall IC housing.
Socket Plate
• Fixed socket plate maintains
consistent lamp position.
Plaster Frame
• Galvanized steel construction.
• Regressed locking screw for
securing hanger bars
• Cutouts for easily crimping
hanger bars in position.
Junction Box
• Positioned to accommodate
straight conduit runs.
• Seven conduit knockouts are
uniform 1/2” size with true
pryout slots.
• Four pryouts with integral strain
relief simplify “NM” non-metallic
sheathed cable installation.
• Three quick connect wire
connectors included.
ALL-NAIL™ Bar Hangers
Bar Hanger features include:
• Pre-installed nail.
• Mini leveling foot aligns the
housing to the bottom of the joist.
• Housing can be positioned at any
point within 24" joist spans
• Score lines allow tool-free
shortening for narrow joist
spacing.
• Bar hangers may be repositioned
90° on plaster frame
• Integral T-bar clip snaps onto
T-bars – no additional clips are
required
Socket
Porcelain E26 socket with nickel
plated brass screw shell.
Thermal Protector
Self resetting thermal protector
deactivates fixture if overheating
occurs due to improper lamping or
misapplied insulation.
Labels
• UL/cUL Listed 1598 Luminaire
• UL/cUL Listed for Damp Location
• UL/cUL Listed for Feed Through
• UL/cUL Listed for Direct Contact
with Insulation and combustible
material
• UL/cUL Listed for Wet Location –
Covered Ceiling
Note: Some units may have
different features.
Visit www.cooperlighting.com for more information on the complete ALL-PRO Stock and
Specification offering. Product availability subject to change without notice.
DIMENSIONS
DESCRIPTION
The All-Pro EI700UAT housing is
designed to be used in direct
contact with insulation. The IC
construction allows an unbroken
insulation barrier to be maintained
and the AIR-TITE design meets
restricted airflow requirements.
Housing
• Double wall aluminum
construction for greater heat
dissipation.
• Double wall housing allows
higher wattages on select trims
than single wall IC housing.
• AIR-TITE gasket is pre-installed.
Socket Plate
• Fixed socket plate maintains
consistent lamp position.
Plaster Frame
• Galvanized steel construction.
• Regressed locking screw for
securing hanger bars
• Cutouts for easily crimping
hanger bars in position
Junction Box
• Positioned to accommodate
straight conduit runs.
• Seven conduit knockouts are
uniform 1/2" size with true
pryout slots.
• Four pryouts with integral strain
relief simplify “NM” non-metallic
sheathed cable installation.
• Three quick connect wire
connectors included.
ALL-NAIL™ Bar Hangers
Bar Hanger features include:
• Pre-installed nail.
• Mini leveling foot aligns the
housing to the bottom of the joist.
• Housing can be positioned at any
point within 24" joist spans
• Score lines allow tool-free
shortening for narrow joist
spacing.
• Bar hangers may be repositioned
90° on plaster frame
• Integral T-bar clip snaps onto
T-bars – no additional clips are
required
Socket
Porcelain E26 socket with nickel
plated brass screw shell.
Thermal Protector
Self resetting thermal protector
deactivates fixture if overheating
occurs due to improper lamping or
misapplied insulation.
Labels
• UL/cUL Listed 1598 Luminaire
• UL/cUL Listed for Damp Location
• UL/cUL Listed for Feed Through
• UL/cUL Listed for Wet Location,
covered ceiling
• UL/cUL Listed for Direct Contact
with Insulation and combustible
material
IC and AIR-TITE™
Certified under ASTM-E283 and
listed UL/cUL 1598. May be used
to meet insulated ceiling and
restricted air-flow requirements
such as:
• Washington State Energy Code
• International Energy Conservation
Code (IECC)
• New York State Energy
Conservation Construction
Code (NY-ECCC)
• State of California Title 24
“Recessed Luminaires in
Insulated Ceilings.”
6-1/2"
[165mm]
7-1/2"
[199mm]
6-3/4"
[171mm]
13"
[330mm]
9-1/2"
[241mm]
1/2"
[13mm]
6-1/2"
[165mm]
7-1/2"
[199mm]
6-3/4"
[171mm]
13"
[330mm]
9-1/2"
[241mm]
1/2"
[13mm]
EI700U
6" Aperture, IC,
New Construction,
120V Line Voltage
Specifications
• Thermally protected
IC housing
• Housing may be covered
with insulation
• For use with 120V
incandescent lamps
EI700UAT
6" Aperture, IC,
New Construction, AIR-TITE,
120V Line Voltage
Specifications
• Thermally protected
IC housing
• AIR-TITE housing prevents
airflow between attic and
living areas
• Housing may be covered
with insulation
• For use with 120V
incandescent lamps