Specifications

6-1/4"
[159mm]
7"
[178mm]
1/2"
[13mm]
6-7/8"
[175mm]
13-1/4"
[337mm]
6" Incandescent
99
DIMENSIONS
DESCRIPTION
ET700
6˝ Aperture, Non-IC,
New Construction,
120V Line Voltage
Specifications
• Thermally protected
Non-IC housing
• May be used in
insulated ceilings but
insulation MUST be
kept 3" from all sides
of fixture
• For use with 120V
incandescent lamps
The ET700 is for use in
non-insulated ceilings. If ceiling
insulation is present, it must be
kept 3" from all sides of the
fixture.
Housing
• Die-stamped CRS with white
powder coat finish.
Socket Plate
• Rigid socket plate adjusts and
locks without tools for various
lamp sizes.
Plaster Frame
• Housing adjusts in plaster
frame to accommodate up to
1-3/4" thick ceilings.
• Regressed locking screw for
securing hanger bars.
• Cutouts for easily crimping
hanger bars in position.
Junction Box
• Positioned to accommodate
straight conduit runs.
• Seven conduit knockouts are
uniform 1/2" size with true
pryout slots.
• Four pryouts with integral
strain relief simplify “NM”
non-metallic sheathed
cable installation.
• Three quick connect wire
connectors included.
ALL-NAIL™ Bar Hangers
Bar Hanger features include:
• Pre-installed nail.
• Mini leveling foot aligns the
housing to the bottom of the
joist.
• Housing can be positioned at
any point within 24” joist spans
• Score lines allow tool-free
shortening for narrow joist
spacing.
• Bar hangers may be
repositioned 90° on plaster
frame
• Integral T-bar clip snaps onto
T-bars – no additional clips are
required.
Socket
Porcelain E26 socket with nickel
plated brass screw shell.
Thermal Protector
Self resetting thermal protector
deactivates fixture if overheating
occurs due to improper lamping
or misapplied insulation.
Labels
• UL/cUL Listed 1598 Luminaire
• UL/cUL Listed for Damp Location
• UL/cUL Listed for Feed Through
• UL/cUL Listed for Wet Location,
covered ceiling
• IP Rated (Improper Lamp)
Note: Some units may have
different features.
Visit www.cooperlighting.com for more information on the complete ALL-PRO Stock and
Specification offering. Product availability subject to change without notice.
DIMENSIONS
DESCRIPTION
ET700R
6˝ Aperture, IC, Remodel,
120V Line Voltage
Specifications
• Thermally protected
Non-IC housing
• May be used in
insulated ceilings but
insulation MUST be
kept 3" from all sides of
fixture
• For use with 120V
incandescent lamps
• For installation from
below the ceiling
The ET700R is for use in
non-insulated existing ceilings.
If ceiling insulation is present, it
must be kept 3" from the fixtures
on all sides. For installation from
below the finished ceiling.
Housing
• Die-stamped CRS with white
powder coat finish.
Socket Plate
• Rigid socket plate adjusts and
locks without tools for various
lamp sizes.
Remodel Clips
Four remodel clips secure housing
and accommodate 1/2" and 5/8"
ceiling thickness.
Junction Box
• Seven conduit knockouts are
uniform 1/2" size with true
pryout slots.
• Four pryouts with integral
strain relief simplify “NM”
non-metallic sheathed cable
installation.
• Three quick connect wire
connectors included.
Socket
Porcelain E26 socket with nickel
plated brass screw shell.
Thermal Protector
Self resetting thermal protector
deactivates fixture if overheating
occurs due to improper lamping
or misapplied insulation.
Labels
• UL/cUL Listed 1598 Luminaire
• UL/cUL Listed for Damp Location
• UL/cUL Listed for Feed Through
• UL/cUL Listed for Wet Location,
covered ceiling
• IP Rated (Improper Lamp)
6-1/2"
[165mm]
7"
[178mm]
1/2"
[13mm]
10-1/2"
[267mm]
7-1/2"
[191mm]
Ceiling opening to match template supplied