LUMARK METALUX SURE-LITES ALL-PRO HALO COMMERCIAL CONSUMER PRODUCTS Off The Shelf Product Catalog
“Off The Shelf” Cooper Lighting’s “Off The Shelf” stock program is designed to keep our most popular industrial, fluorescent, recessed, commercial and residential HID lighting products flowing both on and off your shelf! The “Off The Shelf” program teams high quality products with service benefits and merchandising support that is second to none.
New Product Innovation . . . . . . . . . . . . . . . . . . . . . . P. 2 LUMARK – Commercial & Industrial Indoor/Outdoor Wall Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 8 Floodlights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 20 Quartz Floodlights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cooper Lighting New Product Innovation Cooper Lighting’s sustained level of success is attributed to a constant focus on meeting customer needs. With the shift towards methods of reducing energy use, Cooper Lighting continues to provide relevant, industry-leading solutions to challenging market needs. The Company’s commitment to innovation, quality and value has resulted in an impressive line of award-winning patented product designs.
Cooper Lighting Commitment Cooper Lighting is among the world’s largest manufacturers of commercial, industrial, institutional, roadway and residential lighting fixtures. Metalux, Lumark, Sure-Lites, All-Pro and Halo Commercial are just a few of our contractor-preferred brands, trusted over the years for their quality and performance.
LUMARK ® LUMARK combines craftsmanship and affordability in its full line of commercial high intensity discharge (HID) and energy-efficient LED products. LUMARK has the experience and product line to properly illuminate complex applications, providing superior lighting for parking areas, site lighting, facade, landscape, pathways, security and other commercial applications.
Wall Mount Floodlighting Visit www.cooperlighting.com for more information on the complete Lumark Stock and Specification offering. Product availability subject to change without notice.
TM LED Technology and Reduced Energy Consumption Crosstour LED Conservation of energy, expertise in design and rigorous reliability testing ensure superior luminaire performance. With advancements in LED technology, combined with Cooper Lighting’s expertise in fixture and optical design, the Crosstour and Wal-Pak Series demonstrates that new technology saves energy without compromising performance.
Environmental Conservation Tribute (Full Cutoff) Cooper Lighting builds on a long history of reliability to ensure superior luminaire performance. Leading industry developments in the advancement of LED technology, pulse start metal halide ballast efficiency and Dark Sky Compliant regulations comply with legislative requirements while meeting energy reduction needs.
TM Wall Mount LED TM 10W-30W LED 10W & 20W 6-3/4" (171mm) 30W 8" (203mm) Applications Entrance • Pathway • Low Level • Stairs • Recreational • Retail • Security • Warehouse Wall Pack Delivered Lumens 2500 5000K 2000 2240 Lumens 1500 Specifications 3500K 1600 Lumens 5000K • Universal “all-in-one” product delivering energy-efficient optical control.
Wall Mount PATENTS PENDING Ordering Information Stock Number 10W Model XTOR1A XTOR1A-PC1 XTOR1A-WT 20W Model XTOR2A XTOR2A-N XTOR2A-PC1 XTOR2A-WT 30W Model XTOR3A XTOR3A-N XTOR3A-PC1 XTOR3A-WT UPC Wattage Source Driver LED Kelvin (CCT) Housing Color Photocontrol HID Equivilant 080083592456 080083592432 080083592449 10W 10W 10W LED LED LED 120V 120V 120V 5000K 5000K 5000K Carbon Bronze Carbon Bronze Summit White -120V PC -- 70W 70W 70W 080083592418 080083592357 080083592395 080083592401
Wall Mount TM WAL-PAK Large Wall Pack 28-40W LED 100-400W High Pressure Sodium 150-400W Pulse Start Metal Halide Applications Entrance • Parking Garage • Recreational • Retail • Security • Transportation • Warehouse 10" [254mm] Specifications • Single-point, captive stainless steel hardware closure point 16-5/8" [422mm] • Highly reflective anodized aluminum reflectors provide high-efficiency illumination • UL Listed and cUL certified for wet locations. IP65 Rated for ingress protection • Approx.
Wall Mount FCO Full Cutoff In downlighting applications only.
Wall Mount Architectural Wall Pack 100-150W Pulse Start Metal Halide Applications Entrance • Facade • Parking Garage • Recreation • Retail • Security • Transportation 7" [178mm] 8-1/2" [210mm] Specifications • EISA Compliant • Clear heat- and impact-resistant tempered glass lens 18" [457mm] 9" [229mm] 16-1/2" [419mm] Trapezoid 9" [229mm] Cylinder • Die-cast aluminum door assembly is hinged for easy relamping and maintenance • Two-piece, die-cast aluminum housing designed to complement architect
Wall Mount Trapezoid FCO Full Cutoff In downlighting applications only. Cylinder Ordering Information Stock Number UPC Wattage IMPACT TRAPEZOID Pulse Start Metal Halide MPIT10 623961932236 100W MPIT15 623961904714 150W IMPACT CYLINDER Pulse Start Metal Halide MPIC10 623961932298 100W MPIC15 623961904936 150W Source Lamp Ballast Lamp Included Ballast Kit MP MP Medium-base, ED-17 Medium-base, ED-17 Hi.
Wall Mount Z-PAK Cutoff & Glass Wall Pack 150W High Pressure Sodium 150W Pulse Start Metal Halide Applications Entrance • Parking Garage • Recreational • Retail • Security • Transportation • Warehouse 9-5/8" [244mm] 9-1/4" [235mm] Specifications • Patterned, flat-tempered (cutoff) or borosilicate glass lens minimize direct lamp imaging 14-1/4" [362mm] CUTOFF • One-piece, die-cast door and lens assembly is hinged on the side for easy relamping and maintenance • Die-cast aluminum housing with a dura
Wall Mount Z-Pak Glass CO When used with FZ/FC/FO accessory Z-Pak Cutoff Ordering Information Stock Number UPC Wattage Z-PAK GLASS High Pressure Sodium HPFZ15 623961007279 150W Z-PAK GLASS Pulse Start Metal Halide MPFZ15 623961997167 150W Z-PAK CUTOFF Pulse Start Metal Halide MPFZ15C 623961997525 150W Source Lamp Ballast Lamp Included Ballast Kit HPS Medium-base, B17 Reactor/NPF/120V S55RN-150F6 HPKT-150-REC-NPF-120V MP Medium-base, ED-17 CWA/MT/277V MH150UMED MPKT-150-CWA-MT MP Mediu
Wall Mount WALLY Cutoff & Glass Wall Pack 70-150W High Pressure Sodium 70-100W Pulse Start Metal Halide Applications Entrance • Parking Garage • Recreational • Retail • Security • Transportation • Warehouse 8-3/4" [223mm] Specifications • Patterned, flat-tempered (cutoff) or borosilicate glass lens minimize direct lamp imaging 9-1/4" [235mm] 8-3/8" [213mm] 8-3/4" [223mm] 8-3/4" [223mm] 7-7/8" [200mm] CUTOFF GLASS • One-piece door design held in place with slot-head captive screws • Wally Cutof
Wall Mount Wally Glass CO Wally Cutoff Ordering Information Stock Number UPC Wattage WALLY GLASS High Pressure Sodium LS70G 622696399413 70W LS10G 622696399406 100W LS15G 662401051496 150W WALLY GLASS Pulse Start Metal Halide LP70G 623961978241 70W LP10G 623961978258 100W WALLY CUTOFF Pulse Start Metal Halide LP70C 623961978265 70W LP10C 623961978272 100W Source Lamp Ballast Lamp Included Ballast Kit HPS HPS HPS Medium-base, ED-17 Medium-base, ED-17 Medium-base, ED-17 Reactor/NPF/120V Reactor/
Wall Mount WAL-LITE Polycarbonate Wall Pack 50-70W High Pressure Sodium Applications Entrance • Corridor • Parking Garage • Pathway • Recreation • Retail Security • Transportation • Warehouse 11" [280mm] Specifications • Vandal-resistant, polycarbonate prismatic lens • Optional photocontrol for automatic dusk-to-dawn operation 5-3/8" [136mm] 6-3/4" [172mm] • Heavy-duty, injection-molded polycarbonate housing with bronze finish • Die-cast aluminum back plate with mounting template • Medium-base porc
Wall Mount WAL-LITE Glass Wall Pack 50-100W Pulse Start Metal Halide Applications Entrance • Corridor • Parking Garage • Pathway • Recreation • Retail • Security • Transportation • Warehouse 12" [305mm] Specifications • Clear, linear, prismatic, impactresistant borosilicate glass lens 7-5/16" [186mm] 5-7/16" [138mm] • Housing is equipped with see-through window for field installed photocontrol (order separately) Ordering Information Stock Number UPC Master Carton Wattage Source Lamp Metal Halid
Floodlights How to Floodlight Aiming Floodlights There will be wasted light when the floodlight is aimed at the far edge of the area to be illuminated. NEMA Beam Classifications The illustrations below show common floodlighting National Electrical Manufacturers Association (NEMA) applications and recommended best practices. classifications are used to describe the general shape and application of a distribution.
Floodlights Common Pole Layouts Ground Areas The more lighting locations used, the better the quality of lighting with respect to uniformity, visibility and reduction of shadows. Pole spacings, a factor of the mounting height are recommended maximums. The minimum number of floodlights required at each location for adequate beam coverage is one for corner locations, two for side locations and four for center locations.
Floodlights NIGHTHAWK III Area Floodlight 400-1000W High Pressure Sodium 400W Pulse Start Metal Halide 1000W Probe Start Metal Halide Applications Accent • Facade • Recreation • Retail • Roadway • Security • Sign • Sports • Transportation Specifications 27-1/2" [699mm] 18-1/2" [470mm] 22-1/2" [572mm] 18-1/2" [470mm] 20-1/2" [521mm] YOKE SLIPFITTER 150-400W HPS & MH, 1000W HPS 150-400W HPS & MH, 1000W HPS 9-1/2" [241mm] 9 1/2" [241mm] 1000W MH 1000W MH 10-1/2" [267mm] 10 1/2" [267mm] 20-1/2" [521m
Floodlights Nighthawk Slipfitter-Mount (Specify S) Nighthawk Yoke-Mount (Specify Y) Ordering Information Stock Number UPC Wattage Source EISA Compliant NIGHTHAWK SLIPFITTER-MOUNT High Pressure Sodium HPNKS1K 623961565168 1000W HPS NIGHTHAWK SLIPFITTER-MOUNT Pulse Start Metal Halide MPNKS40 623961755132 400W MP NIGHTHAWK YOKE-MOUNT High Pressure Sodium HPNKY40 623961565199 400W HPS HPNKY1K 623961565182 1000W HPS NIGHTHAWK YOKE-MOUNT Pulse Start Metal Halide MPNKY40 623961755170 400W MP NIGHTHAWK SLIP
Floodlights WARRIOR Large Floodlight 250-400W High Pressure Sodium 150-400W Pulse Start Metal Halide Applications 1" [25mm] Accent • Facade • Parking Garage • Parking Lot • Recreation • Retail • Security • Sports • Transportation 13" [330mm] Specifications • EISA Compliant • Clear tempered glass lens is heat- and impact-resistant • Corrosion-resistant captive retaining screws • Weather-resistant, die-cast aluminum housing with integral door hinges is finished in bronze polyester powder-coat • Full-p
Floodlights Warrior Slipfitter-Mount (X Prefix) Warrior Trunnion-Mount (W Prefix) Ordering Information Stock Number UPC Wattage Source WARRIOR TRUNNION-MOUNT High Pressure Sodium WS25 662400116592 250W HPS WS40 662400117360 400W HPS WARRIOR TRUNNION-MOUNT Pulse Start Metal Halide WP15 623961009280 150W MP WP25 623961754487 250W MP WP32 623961009297 320W MP WP40 623961754524 400W MP WARRIOR SLIPFITTER-MOUNT High Pressure Sodium XS25 662400117469 250W HPS XS40 662400117476 400W HPS WARRIOR SLIPFITTER-M
Floodlights ARROWHEAD TM 150-400W High Pressure Sodium 150-400W Pulse Start Metal Halide Large Floodlight Applications Accent • Entrance • Eave • Facade • Landscape Pathway • Recreation • Retail • Security • Sign Trunnion 14-15/16" [379mm] Specifications 1-9/32" [33mm] • EISA compliant • Tempered glass lens is impactand thermal shock-resistant 2-1/4" [58mm] 11" [280mm] • Die-cast aluminum housing in durable bronze polyester powder-coat finish 16-5/16" [415mm] TRUNNION DETAIL Slipfitter • Fu
Floodlights Arrowhead Trunnion Arrowhead Slipfitter Ordering Information Stock Number UPC Wattage Source Pulse Start Metal Halide Trunnion MPAH15T 080083532025 MPAH25T 080083532032 MPAH40T 080083533152 Pulse Start Metal Halide Slipfitter MPAH15S 080083533190 MPAH25S 080083533206 MPAH40S 080083533220 EISA Compliant Lamp Ballast Lamp Included Ballast Kit 150W 250W 400W MP MP MP Medium-base, ED-17 Mogul-base, ED-28 Mogul-base, ED-37 CWA/MT/277V CWA/MT/277V CWA/MT/277V MH150UMED MS250/U/PS M400/
Floodlights Architectural Floodlight 70-400W Pulse Start Metal Halide Applications Accent • Facade • Landscape • Parking Lot • Pathway • Recreation • Retail • Security • Sign • Sports • Transportation 22" [358mm] 13-7/8" [352mm] Specifications • EISA Compliant • Impact-resistant, clear, flat tempered glass lens • Hinged die-cast aluminum door for easy internal access secured with recessed tamperresistant stainless steel allen head fasteners • Rugged, one-piece die-cast aluminum housing.
Floodlights IMPACT Flood Small IMPACT Flood Medium Ordering Information Stock Number UPC Wattage Source IMPACT SMALL Pulse Start Metal Halide MPMS70 623961978227 70W MP MPMS10 623961978234 100W MP MPMS15 623961757501 150W MP IMPACT MEDIUM Pulse Start Metal Halide MPMM25 623961757433 250W MP MPMM40 623961762901 400W MP EISA Compliant Lamp Ballast Lamp Included Ballast Kit Medium-base, ED-17 Hi.Rx/HPF/MT/277V Medium-base, ED-17 Hi.
Floodlights Small Floodlight 70-150W High Pressure Sodium 70-150W Pulse Start Metal Halide Applications Accent • Entrance • Eave • Facade • Landscape • Pathway • Recreation • Retail • Security • Sign 5" [127mm] 3" [77mm] 10-11/16" [272mm] Specifications • Tempered glass lens is impactand thermal shock-resistant • Stainless steel latch allows easy access for relamping 2" [51mm] .45" Dia.
Floodlights Knuckle-Mount Round box cover not included.
Quartz Floodlights WEDGE Quartz Floodlight 500W Quartz Halogen Applications Accent • Corridor • Entrance / Eave • Facade • Pathway • Retail • Security • Sign 6-1/4" [159mm] Specifications • Impact-resistant tempered glass lens with hinged die-cast door 9" [229mm] 4" [102mm] • Stainless steel latch for tool-less entry • Die-cast aluminum housing with extended heat dissipating fins in black finish • Full-perimeter silicone gasket seals out external contaminants • Double-ended quartz lamp included.
Dusk-to-Dawn ETERNALUME Area Dusk-to-Dawn 70-150W High Pressure Sodium 100W Pulse Start Metal Halide Luminaire Applications Parking Lot • Pathway • Recreation • Retail • Roadway • Security • Transportation 16" [406mm] w/ Photocontrol Specifications • High-impact, 12" wide, open-bottom acrylic refractor • NEMA twistlock style photocontrol for automatic dusk-to-dawn operation • Precision die-cut aluminum housing 12" [305mm] 19" [482mm] • HPS: Mogul-base screw shell lamp socket with spring-loaded center
Area/Roadway TRIBUTE Area Luminaire 150-400W High Pressure Sodium 150-400W Pulse Start Metal Halide Applications Parking Areas • Access Roadways • General Off Street Area • Site Lighting 22" [559mm] Specifications 8" [203mm] • EISA Compliant • Clear, flat tempered glass lens 6-1/2" [165mm] • One-piece, die-cast aluminum door frame features a single stainless steel latch for toolless opening and stainless steel hinges for tool-less removal • Rugged, one-piece, die-cast aluminum housing with bronze p
Area/Roadway FCO "All-in-One" Includes fixture, lamp, 8" square pole arm and round pole adapter in a single carton. Full Cutoff Available in Pole and Fixture Combo Contact Local Cooper Lighting Agent for details.
Industrials Don’t Sweat It! Cooper Lighting’s Lumark Steeler series of open high-bays are rated for 65°C (149°F) ambient environments through 400W, while most competitors only meet U.L. requirements for 55°C (131°F). Since optimal fixture life depends upon the ambient environment and rated temperature of the internal components, every degree has considerable performance implications. With the Steeler’s superior housing construction, components run cooler than the competitive products.
STEELER Aluminum Industrials High-Bay 320W & 400W Pulse Start Metal Halide Unit Pack Maximum Height 24-1/8" [613mm] Applications Gymnasium • Recreation • Retail • Transportation • Warehouse Components nested in one compact unit pack carton.
Industrials STEELER Prismatic High-Bay 400W Pulse Start Metal Halide Unit Pack Applications Gymnasium • Recreation • Retail • Transportation • Warehouse Maximum Height 28-1/2" [724mm] Specifications • EISA Compliant • High efficiency, clear prismatic 22" acrylic refractor • Formed-steel, open-air ballast housing with white finish • Slide-on, die-cast aluminum mounting box with 3/4" tapped conduit opening • Mogul-base porcelain lamp socket, open rated • Coated lamp included and available in 400W MP • F
Industrials Components nested in one compact unit pack carton. Ordering Information Stock Number UPC Wattage Source EISA Compliant Lamp Ballast Lamp Included Pulse Start Metal Halide Unit Pack consists of PD22 Acrylic Refractor, Ballast Pod and Coated Mogul-Base Lamp. MPSS40-PD-OR 623961797446 400W MP ED37 CWA/MT/277V MP400-O-BU-D-MR-E37-C Ballast Pod MPSS-400-MT-OR *OR suffix designates open rated fixture, 2005 NEC Compliant Visit www.cooperlighting.
Industrials ENTERPRISE Industrial Low-Bay 250W, 320W & 400W Pulse Start Metal Halide Unit Pack Applications Gymnasium • Recreation • Retail • Transportation • Warehouse 26" [660mm] Specifications • EISA Compliant • Enclosed and gasketed, highefficiency, computer–designed 22" faceted aluminum reflector 22" [559mm] • 100% virgin UV stabilized acrylic lens • Formed-steel, open-air ballast housing with white finish • Slide-on, die-cast aluminum mounting box with 3/4" tapped conduit opening • Mogul-base p
Industrials Components nested in one compact unit pack carton. Ordering Information Stock Number UPC Wattage Source EISA Compliant Lamp Ballast Lamp Included Ballast Pod Pulse Start Metal Halide Unit Pack consists of R22 Reflector EP22 Acrylic Lens, Ballast Pod and Mogul-Base Lamp.
Industrials VERTIMARK II Industrial Luminaire 175-250W Pulse Start Metal Halide Applications Parking Garage • Corridor • Transportation 13-1/4" [337mm] Specifications • EISA Compliant • Type V acrylic prismatic refractor controls light for high vertical and horizontal footcandles 17" [432mm] • Hinged refractor permits relamping without the use of tools Quick mounting plate allows for hands free installation • Die-cast aluminum housing with white polyester powdercoat finish • Removable ballast compa
Industrials VAPORTIGHT Wall Mount Up to 200W Incandescent Applications 1-5/8" [41mm] 12-5/8" [321mm] Accent • Entrance/Eave • Pathway • Recreation • Retail • Security • Transportation Specifications • Borosilicate glass globe protects against thermal shock breakage ICVW1G • Threaded glass and guard for easy assembly 4-1/4" [108mm] 9-1/2" [242mm] • Stainless steel locking screw for vandal protection Stock Number UPC Master Carton Wattage Source Lamp • Rigid, one-piece, die-cast aluminum guar
Worklights The First Choice Choose the Steeler Worklight for your temporary lighting! Lumark’s Steeler Worklight is available with 2005 NECcompliant, open-rated lamps with added UV protection to ensure a safe and reliable temporary lighting solution! Steeler Worklight’s open-rated lamp has a protective barrier that contains particles in the event of a non-passive failure, while offering a reduction in UV exposure compared to standard metal halide lamps.
Worklights STEELER Construction Worklight 400W Pulse Start Metal Halide Unit Pack 11-1/4" [286mm] OK TY HO SAFE LUDED INC Applications Temporary • Warehouse Specifications • EISA Compliant 24-1/2" [622mm] • Durable formed and welded steel wire guard coated with a safety yellow polyester paint for easy visibility and safety • Formed steel, open-air ballast housing with white polyester finish 7-1/2" [191mm] • Slide-on die-cast aluminum mounting box with 3/4" tapped conduit opening • Mogul-base porce
Fluorescent METALUX ® Cooper Lighting is a leader in the design, development and production of high performance fluorescent lighting for commercial, industrial, institutional and retail markets. Heavy gauge steel construction, durable baked white finish and electrical assemblies ensure years of performance integrity. Cooper Lighting is your single fluorescent lighting source. 46 Visit www.cooperlighting.com for more information on the complete Metalux Stock and Specification offering.
Paralux III Parabolic Louver 2EP3 Series Paralux III Parabolic Applications Commercial • Office • Schools • Hospitals • Retail Merchandising Areas Dimensions 2EP3 Lamp Configurations 2EP3 Dimensions for Top View 2' x 2', 2-Lamp 2-Lamp, 2U6T8, 2' x 2' Specifications Access Plate 7/8" [22mm] K.O. (2) 7/8" [22mm] K.O.
Recessed Static Troffer GR8 Series Commercial Grade T8 Recessed Static Troffer Dimensions GR8 Lamp Configurations Dimensions for Top View 2-Lamp, 2U6T8, 2' x 2' 2' x 2', 2-Lamp Applications 1-1/2" [38mm] Commercial Offices • Schools • Hospitals • Retail Merchandising 3-1/4" [83mm] X=5-3/16" [132mm] 23-3/4" [603mm] 3-Lamp, 32W T8, 2' x 4' Specifications 2-7/8 [74mm] • Unibody construction • Optimized for T8 lamps • Equipped with energy saving ballasts/complies with federal energy efficiency st
Surface Wraparound WN Series Commercial/Specification Grade T8 WS Series Surface Wraparound WP Series Applications Commercial Spaces • Schools • Dormitories • Offices • Retail Areas Specifications • Energy saving ballasts comply with federal energy efficiency standards Dimensions WS Series Lamp Configurations WN Series Lamp Configurations 2-Lamp, 32W T8 10-1/2" [265mm] Y 2-1/2" [63mm] X=4-5/8" [117mm] Y=6" [152mm] 2-Lamp, 32W T8 4-Lamp, 32W T8 X=5-1/4" [133mm] 44-1/2" [1131mm] 42-15/16" [1090mm]
Commercial Striplites SNF Series Commercial SSF Series Striplite Applications Storage/Utility Areas • Coves • Display Cases • Shops • Task • General Area Lighting Specifications • Pre-installed flip-up sockets for easy installation • Energy saving ballasts comply with federal energy efficiency standards • Die formed channel • Baked enamel finish • End plate converts to channel aligner for continuous row mounting (SSF only) • Easy wireway access • Wireway cover removed without tools • Numerous KOs for easy
Commercial Retrofit Kits ART Series Parabolic/Troffer Retrofit Kits Commercial Kits Applications Commercial • Back Office • Retail • Educational • Warehouse Store Room Specifications • Save money by re-using existing housing and shielding Dimensions 2-Lamp • Perfect for T12 lamp/ballast replacement 13-1/2" [342mm] 2" [51mm] 10-3/4" [274mm] • Fits parabolics or troffers as low as 3-1/4" deep Ceiling Compatibility 2' x 2' 23-15/16" [609mm] 12-1/4" [311mm] • Pre-wired and assembled with or without
High-Bay Industrial Fluorescent I5 Series High-Bay Fluorescent Industrial Luminaire Applications Retail • Shopping Malls • Light Industrial • Recreational Environments Specifications • Specular enhanced aluminum standard for optical distribution. White painted optics optional. • Great alternative to traditional HID high bay lighting • Optional hanging devices available when retrofitting from HID • Superior lumen maintenance exceeds that of HID. 90-95% of initial light output at end of life.
High-Bay Industrial Fluorescent HBL Series High-Bay Fluorescent Open Body Industrial Luminaire Applications Retail • Shopping Malls • Light Industrial • Recreational Environments Specifications • Specular enhanced aluminum standard for optical distribution. White painted optics optional.
High-Bay Industrial Fluorescent HBI Series High-Bay Fluorescent Full Body Industrial Luminaire Applications Retail • Shopping Malls • Light Industrial • Recreational Environments. Specifications • Specular enhanced aluminum standard for optical distribution. White painted optics optional. • Great alternative to traditional HID high bay lighting • Optional hanging devices available when retrofitting from HID Dimensions HBI Lamp Configurations 7/8" [23mm] K.O. 1/2" [13mm] K.O. 4 LAMP 7/8" [23mm] K.O.
Industrial Vaportite VT3 Series Industrial Vaportite Applications Commercial • Institutional • Industrial • Corrosive Environments Specifications • Energy saving ballasts comply with federal energy efficiency standards Dimensions VT3 Lamp Configurations 2-Lamp, T8 or T5 VT3 Dimensions for Top View 4' • High-impact acrylic/DR diffuser material 38-3/4" [984mm] 1/4" x 28" Stud (2 Places) X 4-7/8" [123mm] X=1-13/32" [36mm] Y=2-1/2" [64mm] • Reinforced fiberglass housing 41-1/2" [1054mm] Optional Back
Emergency/Exit SURE-LITES ® The trusted name for exit signage and emergency lighting Sure-Lites offers a comprehensive line of exit signs, emergency lights, lighting inverters and retrofit products. A full range of innovative solutions are available from routine commercial to upscale architectural to hazardous industrial locations. Sure-Lites has been providing energy-efficient solutions through LED technology since 1995, moving beyond exit signs to develop LED emergency lighting products.
Emergency/Exit Exit Signs Visit www.cooperlighting.com for more information on the complete Sure-Lites Stock and Specification offering. Product availability subject to change without notice.
All-Pro Emergency Light APEL Series Thermoplastic Emergency Lighting Applications TM • General purpose applications Specifications 4-1/2" [114mm] • Dual-voltage input 120/277 VAC, 60Hz 2-5/16" [59mm] 9" [229mm] • High-impact thermoplastic housing and mounting plate with textured finish • Fully adjustable LED heads • Long-life nickel cadmium battery Energy Data Ordering Information SAMPLE NUMBER: APEL • Test switch/power and indicator light APEL • Suitable for wall or ceiling mount application
Emergency Light CU2 Series Polycarbonate Emergency Lighting 11 1/8" [283mm] 11 1/8" [283mm] Applications 3 3/16" [81mm] • General purpose applications Specifications • Dual-voltage input 120/277 VAC, 60 Hz isolation transformer 5 3/8" [137mm] • High-impact polycarbonate housing and mounting plate with designer-white textured finish • Maintenance-sealed lead calcium battery • Suitable for wall or ceiling mount applications (including floor proximity installations) • Universal J-Box mounting pattern O
Emergency Light CC2 Series Polycarbonate Emergency Lighting Applications • General purpose applications Specifications CHARGE TEST • Dual-voltage input 120/277 VAC, 60Hz, isolation transformer 5 3/8" [137mm] • Injection-molded, color-stable, high-impact UL-94-5V rated polycarbonate housing and mounting plate (housing is tethered to mounting plate.
Emergency Light CC4 Series Polycarbonate Emergency Lighting Applications 13" [330mm] • General purpose applications Specifications 6 3/8" [162mm] • Dual-voltage input 120/277 VAC, 60Hz, isolation transformer • Injection-molded, color-stable, high-impact UL-94-5V rated polycarbonate housing and mounting plate (Housing is tethered to mounting plate.
Emergency Light XR Series Steel Emergency Lighting 1-7/8" [48mm] Applications 13-1/4" [337mm] • General purpose applications Specifications 7-7/8" [200mm] • Dual-voltage input 120/277 VAC, 60Hz • 22 gauge die-formed steel housing 9-3/4" [248mm] 2-1/2" [64mm] 5" max.
Remotes Remotes Emergency Lighting Applications Ordering Information • General purpose applications 6 Volt Single Head Weatherproof Remotes (UL Wet Location Listed) Catalog No. Lamp Type Volts Watts Lamp No. 6T6WWH 6X7WWH Halogen Sealed Beam Incandescent Sealed Beam 6 6 6 7.2 029-37 029-75 12 Volt Universal Heads Catalog No. Lamp Type Volts Watts Lamp No.
All-Pro Exit Sign All-Pro Remote APX Series Thermoplastic Exit Sign Applications • General purpose applications TM 3-15/16˝ [100mm] 3/4˝ [19mm] Specifications • Dual-voltage input 120/277 VAC, 60Hz 7-1/2˝ [191mm] 5-1/2˝ [140mm] • High-impact thermoplastic housing • Long-life LED lamps provide uniform diffused illumination • Nickel cadmium battery 12-7/16˝ [316mm] • Ceiling, wall or end mounting 11-11/16˝ [297mm] 1-3/4˝ [45mm] • Field selectable chevrons Ordering Information • Universal exits
All-Pro Emergency/Exit Combo APC Series Thermoplastic Combo with Heads Emergency/Exit Lighting 5-1/2˝ [140mm] TM 3-15/16˝ [100mm] Applications • General purpose applications 3/4˝ [19mm] Specifications 7-1/2˝ [191mm] • Dual-voltage input 120/277 VAC, 60 Hz 8-1/4˝ [210mm] • High-impact, thermoplastic housing 11-11/16˝ [297mm] Ordering Information 2-5/16˝ [59mm] SAMPLE NUMBER: APC7R, APCH7G • Nickel cadmium battery Energy Data APC 7 Family APC=All Pro Emergency Exit/Emergency Series 7=Self-
Exit Sign EEX Series Edge-Lit/Surface Emergency Sign TM Wall Mount End Mount 14 3/4" [375mm] 16 5/8" [422mm] Applications • General purpose applications Specifications • Dual-voltage input 120/277 VAC, 60Hz 1 7/8" [48mm] • Injection-molded polycarbonate housing • Injection-molded, high-impact, clear acrylic panel • LED lamping 13" [330mm] 13" [330mm] 3 7/8" [98mm] 6" [152mm] 10 5/8" [270mm] • Nickel cadmium battery (EEX7 only) 7 1/8" [181mm] • Full recharge time, 24 hours (max.
Exit Sign CX Series Die Cast Exit Sign 4 3/8" [111mm] 5 1/16" [129mm] TM 15/16" [24mm] Applications • General purpose applications 8-1/4" (210mm) 12 5/8" [321mm] 2-1/4" [57mm] SAMPLE NUMBER: CX7170RSD Housing Finish Blank=Brushed Aluminum Face w/Black Housing WH=White • LED Lamping Options Blank=No additional options • Exit can be universally mounted: ceiling, wall or end • Universal pattern knock-outs on rear of single face housing for direct mounting to junction box Face Options 1=Single 2=
Chicago Code – Emergency Light ST1 Series Steel/Chicago Code Emergency Lighting Applications 7-1/8" [181mm] • General purpose applications 4-5/8" [117mm] Specifications • Dual-voltage input 120/277 VAC, 60Hz 4" [102mm] 7-1/2" maximum [191mm] • 18-gauge, die-formed steel housing 4-5/8" [117mm] • Two-side, fully mounted adjustable heads with glare-free lens 2-1/4" [57mm] • Knockout, conduit or cord set 2" 1-1/4" [51mm] [32mm] 7-1/8" [181mm] • Universal J-box mounting pattern with keyhole slots •
Chicago Code – Emergency Light XR Series Steel/Chicago Code Emergency Lighting 11-1/4" [286mm] 2-1/4" [57mm] 4-1/2" [114mm] Applications • General purpose applications Specifications 6-1/8" [156mm] 12-1/4" [311mm] 2-1/4" [57mm] • Dual-voltage input 120/277 VAC, 60Hz Figure 1 • 22-gauge, die-formed steel • Two fully-adjustable metal heads with die-cast swivel top mounted • Sealed lead calcium batteries • Knockout, conduit or cord set 14-1/2" [368mm] 1-7/8" [48mm] • Universal J-box mounting pattern
Chicago Code – Emergency Light GC Series Steel/Recessed/Chicago Code Emergency Lighting Applications • General purpose applications Specifications • Dual-voltage input 120/277 VAC, 60Hz 5-1/8" [130mm] • 20-gauge, die-formed steel housing 23-1/4" [591mm] 6-3/4" [171mm] • Knockout, conduit or cord set • Flanged for mounting in grid-type suspended ceilings 6-3/4" [171mm] • Single modular electrical connector • Line-latching, solid-state voltage limited charger, solid-state switching, low-voltage dis
Chicago Code – Exit Sign CHX Series Steel/Chicago Code Exit Sign TM Applications • General purpose applications Specifications • Dual 120/277 VAC voltage, LED only 6-3/4" [171mm] • 20-gauge steel housing • Universal pattern knockouts on rear for direct mounting to junction box 2-5/16" [59mm] 4-1/2" [114mm] 7/8" [22mm] • Steel canopy allows ceiling or end mounting 9" [229mm] • Full length 3/4" stroke arrow on directional exits • Red silkscreened lettering on translucent white, heat-tempered, Impact
Chicago Code – Emergency/Exit Combo CHX Series Steel Combo wHeads/Chicago Code Emergency/Exit Sign Applications • General purpose applications Specifications • Dual-voltage input 120/277 VAC, 60Hz, LED only • 20-gauge steel housing 6-3/4" [171mm] 2-5/16" [59mm] 4-1/2" [114mm] • Universal pattern knockouts on rear for direct mounting to junction box 7/8" [22mm] 4-1/2" [114mm] • Full-length, 3/4" stroke arrow on directional exits 14-3/8" [365mm] • Red silkscreened lettering on white phosphorescent,
Emergency/Exit 73
All-Pro Recessed THE ALL-PRO ADVANTAGE PART OF THE HALO FAMILY HALO ALL-PRO • • • • • ® TM Compatible with Halo housings and trims - mix and match as needed UL and cUL listed. Meets or exceeds applicable listing and rating requirements. Can be used to meet OTS freight requirements. Full offering also on the Halo website at www.cooperlighting.
All-Pro Recessed Regressed Locking Screw and Multiple Crimp Points Junction Box with Push-In Wire Connectors • Patented regressed screw locks hanger bars in position - regressed design does not interfere with ceiling material. • Screw can be tightened with slotted or phillips screwdriver or nut driver. • Five bar hanger locking points on the frame allow the downlight to stay in place during drywalling. • Push-in wire connectors speed installation - simply strip and insert supply wires into connectors.
6" LED Recessed Retrofit DIMENSIONS 3-7/16" [87mm] 7-1/4" [184mm] DESCRIPTION The All-Pro RL706830WBS LED Module-Trim is for use with Halo H750 LED series 6” aperture recessed housings. The RL706830WBS includes a dedicated LED connector for California Title-24 compliance using a non-screw base socket, and for where a non-screw base high-efficacy luminaire is required. The RL7 with integral LED driver offers 120 volt dimming capability.
5"/6" LED Recessed Retrofit DIMENSIONS 3-7/16" [87mm] 7-1/4" [184mm] DESCRIPTION The All-Pro RL706830E26WBS is a retrofit LED Module-Trim for 5” and 6” aperture recessed downlights. The RL706830E26WBS is designed for use with compatible 5” and 6” housings including the Halo H25, H5, H27, H7, H7U series and All-Pro ET/EI500, ET/EI2700, ET/EI700. The RL7 with integral LED driver offers 120 volt dimming capability. The RL7 lens provides uniform illumination and wet location listing.
3" Incandescent DIMENSIONS 5-1/4" [133mm] 3" [76mm] 5" [127mm] 7/16" [11mm] 3-3/16" [81mm] 4-1/8" [104mm] DESCRIPTION ETR300 ETR300W 3" Round Recessed Housing and Trim Kit 60W PAR16 Tungsten Halogen Reflector Lamp Specifications • Thermally Protected Non-IC, AIR-TITE Housing • May be used in insulated ceilings but insulation MUST be kept 3" from of sides of fixture ETR300 3” Round Aperture Non-IC AIR-TITE Housing for 60W PAR16 screw base reflector lamp.
3" Incandescent DIMENSIONS 5-1/4" [133mm] 3" [76mm] 5" [127mm] 7/16" [11mm] 3-3/16" [81mm] 4-1/8" [104mm] DESCRIPTION ETR350 3” Round Aperture Non-IC AIR-TITE Housing for 50W MR16-120V GU10 lamp. Black Baffle with Gloss White Trim Ring included. TRIMS Baffle trims in Gloss White or Black with Gloss White trim rings. Friction type springs hold baffle trims securely in the housing. THERMAL PROTECTOR Self resetting thermal protector protects against improper lamping and direct contact with insulation.
3" Incandescent DIMENSIONS 5-1/4" [133mm] 5" [127mm] 7/16" [11mm] 3" [76mm] 4-1/8" [104mm] 3-3/16" [81mm] DESCRIPTION ETS300 ETS300W 3" Square Recessed Housing and Trim Kit 60W PAR16 Tungsten Halogen Reflector Lamp Specifications • Thermally Protected Non-IC, AIR-TITE Housing • May be used in insulated ceilings, but insulation must be kept 3" from all sides of fixture ETS300 3” Square Aperture Non-IC AIR-TITE Housing for 60W PAR16 screw base reflector lamp.
3" Incandescent DIMENSIONS 5-1/4" [133mm] 5" [127mm] 3" [76mm] 7/16" [11mm] 4-1/8" [104mm] 3-3/16" [81mm] DESCRIPTION ETS350 3” Square Aperture NonIC AIR-TITE Housing for 50W MR16-120V GU10 lamp. Black Baffle with Gloss White Trim Ring included. TRIMS Baffle trims in Gloss White or Black with Gloss White trim rings. Friction type springs hold baffle trims securely in the housing.
4" Incandescent DIMENSIONS 5" [127mm] DESCRIPTION ET400ATSB 4" Aperture, Non-IC, New Construction, AIR-TITE, 120V Line Voltage with Adjustable Socket Brackets Specifications • Thermally protected Non-IC housing • May be used in insulated ceilings but insulation MUST be kept 3" from all sides of fixture 1/2" [13mm] 4-1/2" [114mm] The ET400SB is a Non-IC, AIR-TITE™ housing designed for use with small aperture trims. The shallow height allows it to be used in spaces where vertical height is limited.
4" Incandescent DIMENSIONS 5" [127mm] 4-5/8" [116mm] 11-1/2" [292mm] 4-1/4" [108mm] Ceiling opening to match template supplied DESCRIPTION The ET400RSB is a Non-IC, AIRTITE™ remodel housing designed for use with small aperture trims. The shallow height allows it to be used in spaces where vertical height is limited. The ET400RSB is installed from below the ceiling. For use in non-insulated ceilings. If ceiling insulation is present, it must be kept 3" from the fixtures on all sides.
4" Low Voltage DIMENSIONS 5" [127mm] 5-1/4" [133mm] 8" [203mm] 1/2" [13mm] DESCRIPTION ET400LVAT 4" Aperture, Non-IC, New Construction, AIR-TITE, 12V Low Voltage, MR16 Specifications • Thermally protected Non-IC housing • May be used ininsulated ceilings but insulation MUST be kept 3" from all sides of fixture • Integral 120V magnetic transformer 4-1/2" [114mm] The ET400LV is a small aperture low voltage housing for providing accent and task lighting. For use in non-insulated ceilings.
4" Low Voltage DIMENSIONS 5" [127mm] 4-5/8" [118mm] 13-1/2" [343mm] 1/2" [13mm] DESCRIPTION The ET400LVR is a small aperture low voltage remodel housing for providing accent and task lighting. For use in non-insulated ceilings. If ceiling insulation is present, it must be kept 3˝ from the fixtures on all sides. Housing Die-stamped CRS with white powder coat finish.
5" Incandescent DIMENSIONS 7" [178mm] 5-3/4" [146mm] 7" [178mm] 1/2" [13mm] 10-1/2" [267mm] DESCRIPTION ET500 5" Aperture, Non-IC, New Construction, 120V Line Voltage Specifications • Non-IC housing • May be used in insulated ceilings but insulation MUST be kept 3" from all sides of fixture • For use with 120V incandescent lamps The All-Pro 500 series utilizes a 5" aperture designed for smaller sized PAR20 and PAR30 halogen lamps.
5" Incandescent DIMENSIONS 7" [178mm] 5-3/4" [146mm] 7" [178mm] 1/2" [13mm] 10-1/2" [267mm] DESCRIPTION The All-Pro 500 series has a 5" aperture designed for PAR20 and PAR30 halogen lamps. EI500AT is designed for use in insulated ceilings and may be completely covered in insulation. AIR-TITE™ design meets restricted air flow requirements. Housing • Die-stamped CRS with white powder coat finish. • Housing adjusts in plaster frame to accommodate ceiling up to 1-3/8" thick.
ET500, ET500R, EI500AT, EI500RAT ERT520 Reflector Cone • Torsion Springs pull trim tight to ceiling ET50 0 ET50 0R 75W R30, 75W PAR30, 75W PAR30L, 65W BR30 E I 5 0 0 AT 50W R30, 60W BR30, 75W PAR30 E I 5 0 0 R AT 50W PAR30L, 50W PAR30, 60W BR30 Height: 3-1/4" [82mm] OD: 6-1/2" [127mm] ERT520WHT High Gloss Appliance White Trim with White Reflector Cone ERT520 High Gloss Appliance White Trim with Clear Specular Reflector Cone ERT521 Reflector • Torsion Springs pull trim tight to ceiling ET50 0 ET50
ET500, ET500R, EI500AT, EI500RAT ERT513 Baffle • Friction Clip retention • Lamps-ERT513WHT: 75W A19, 65W BR30, ET50 0 75W R30, 75W PAR30L ET50 0R E I 5 0 0 AT E I 5 0 0 R AT Height: 5" [127mm] H OD: 6-3/4" [171mm] ERT513WHT High Gloss Appliance White Trim with White Baffle OD 65W BR30, 75W PAR30L • Lamps - ERT513: ET50 0 ET50 0R 60W A19, 65W BR30, 75W R30, 75W PAR30L E I 5 0 0 AT E I 5 0 0 R AT 50W PAR30L, 65W BR30 ERT513 High Gloss Appliance White Trim with Black Baffle ERT513TS Baffle • Torsion
ET500, ET500R, EI500AT, EI500RAT ERT500 S p l a y Tri m • Torsion Springs pull trim tight to ceiling Height: 1-7/8" [48mm] OD: 6-1/2" [165mm] ET50 0 ET50 0R 65W BR30, 75W R30, 75W PAR30 E I 5 0 0 AT 65W BR30, 75W PAR30, 75W R30 E I 5 0 0 R AT 50W PAR30, 75W PAR30L, 60W BR30 ERT500 High Gloss Appliance White Splay Trim ERT550 Frosted Drop Glass Shower Light • Torsion Springs pull trim tight to ceiling ET50 0 ET50 0R 75W A19, 75W PAR30 E I 5 0 0 AT E I 5 0 0 R AT 40W A19, 50W PAR30 OD: 6-1/2" [1
6" Incandescent DIMENSIONS 7" [178mm] 7-1/2" [191mm] 1/2" [13mm] DESCRIPTION 10-1/2" [267mm] 6-1/2" [165mm] The EI700 housing is designed for use in insulated ceilings where the housing will be in direct contact with insulation. EI700 may be converted into AIR-TITE installation when used with AIR-TITE trims. Look for the AIR-TITE trim logo in this section. Housing • Aluminum construction for greater heat dissipation.
6" Incandescent DIMENSIONS 7" [178mm] 7-1/2" [191mm] 1/2" [13mm] 6-1/2" [165mm] 10-1/2" [267mm] DESCRIPTION EI700AT 6˝ Aperture, IC, New Construction, AIR-TITE, 120V Line Voltage Specifications • Thermally protected IC housing • AIR-TITE housing prevents airflow between attic and living areas • Housing may be covered with insulation • For use with 120V incandescent lamps The EI700AT housing is designed for use in insulated ceilings where the housing will be in direct contact with insulation material.
6" Incandescent DIMENSIONS 6-7/8" [175mm] 7" [178mm] 6-1/4" [159mm] 1/2" [13mm] 13-1/4" [337mm] Ceiling opening to match template supplied DESCRIPTION The All-Pro EI700RAT remodel housing is designed for existing ceiling installations where the housing will be in direct contact with insulation. AIR-TITE design meets restricted airflow requirements. Housing • Aluminum construction for greater heat dissipation. • AIR-TITE gasket is pre-installed.
6" Incandescent DIMENSIONS 7" [178mm] 7-1/2" [191mm] 1/2" [13mm] 6-1/2" [165mm] 10-1/2" [267mm] DESCRIPTION EI700ATNB 6˝ Aperture, IC, New Construction, AIR-TITE, 120V Line Voltage, No Socket Bracket Specifications • Thermally protected IC housing • AIR-TITE housing prevents airflow between attic and living areas • Housing may be covered with insulation • For use with 120V incandescent lamps • “NB” no socket bracket housing saves installation time with fixed socket position on trims and quick wiring c
6" Incandescent DIMENSIONS 7" [178mm] 7-1/2" [191mm] 1/2" [13mm] 6-1/2" [165mm] 10-1/2" [267mm] DESCRIPTION The EI700NB is designed for installations where it will be in direct contact with insulation. These housings are designed to save installation time. They are designed without a socket plate for use with socket supporting trims only so there is no need to spend time adjusting or disconnecting the socket and removing the socket plate.
EI700, EI700R, EI700AT, EI700RAT, EI700ATNB, EI700NB ERT710 Height: 2-7/8" [73mm] Specular Reflector • Coil Spring retention EI70 0 E I 7 0 0 AT 75W R30, 65W BR30, 50W PAR30, 75W PAR30L EI70 0R E I 7 0 0 R AT 50W PAR30, 75W PAR30L, 65W BR30, 75W R30 OD: 7-1/4" [184mm] ERT710 High Gloss Appliance White Trim with Clear Specular Reflector ERT712 White Reflector • Socket supporting trim • ERT712 - Friction clip retention • ERT712TS - Torsion spring retention EI70 0 E I 7 0 0 AT EI70 0R E I 7 0 0 R AT EI
EI700, EI700R, EI700AT, EI700RAT, EI700ATNB, EI700NB ERT713WHT White Metal Baffle • Socket supporting trim • ERT713WHT - Friction clip retention • ERT713WHTTS - Torsion spring retention EI70 0 E I 7 0 0 AT EI70 0R E I 7 0 0 R AT EI70 0NB E I 7 0 0 AT N B ERT713WHTS 40W A19, 65W BR30, 75W R30, 75W PAR30, 75W PAR30L, 90W BR40 ERT713WHT Height: OD: 5-3/8" [136mm] 7-1/4" [184mm] ERT713WHTTS High Gloss Appliance White Trim with White Baffle and Torsion Spring Construction ERT713WHT High Gloss Appliance Whi
EI700, EI700R, EI700AT, EI700RAT, EI700ATNB, EI700NB ERT705 Open • Coil Spring retention EI70 0 E I 7 0 0 AT 65 W BR30, EI70 0R 75W PAR30, E I 7 0 0 R AT 75W PAR30L EI70 0NB E I 7 0 0 AT N B ERT721 Shower Light with Frosted Glass Lens and Reflector • Torsion springs pull trim tight to ceiling • Wet location listed for use in showers EI70 0 E I 7 0 0 AT EI70 0R E I 7 0 0 R AT EI70 0NB E I 7 0 0 AT N B OD: 8" [203mm] ERT705 High Gloss Appliance White Trim Height: 4-1/4" [108mm] OD: 8" [203mm] ERT721 High
6" Incandescent DIMENSIONS 7" [178mm] 7-1/2" [191mm] 1/2" [13mm] 6-1/2" [165mm] 10-1/2" [267mm] DESCRIPTION The ET700 is for use in non-insulated ceilings. If ceiling insulation is present, it must be kept 3" from all sides of the fixture. Housing • Die-stamped CRS with white powder coat finish. S o cke t P l a te • Rigid socket plate adjusts and locks without tools for various lamp sizes. Plaster Frame • Housing adjusts in plaster frame to accommodate up to 1-3/4" thick ceilings.
ET700, ET700R ERT710 Height: 2-7/8" [73mm] Specular Reflector • Coil Spring retention ET70 0 65W BR30, 75W R30, 75W PAR30, 150W R40, 150W PAR38 ET70 0R 65W BR30, 75W R30, 75W PAR30, 75W PAR30L, 150W R40 OD: 7-1/4" [184mm] ERT710 High Gloss Appliance White Trim with Clear Specular Reflector ERT712 White Reflector • Socket supporting trim • ERT712 - Friction clip retention • ERT712TS - Torsion spring retention 85W BR30, 120W BR40, 100W R30, 75W PAR30L, 100W A19 ET70 0 ET70 0R 65W BR30, 75W PAR30L ER
ET700, ET700R ERT713L Black Metal Baffle • Provides deeper lamp regression • ERT713LTS - Torsion spring retention • ET713L - Friction clip retention ET70 0 75W A19, 75W PAR30L, 75W PAR30, 85W BR30, 100W R30, 120W BR40, 150W R40 ET70 0R 65W BR30, 75W PAR30L, 150W R40 Height: 5-3/8" [136mm] OD: 7-1/4" [184mm] ERT713LTS ERT713LTS High Gloss Appliance White Trim with Black Baffle and Torsion Spring Construction ERT713L ERT714 Height: 2-1/4" [57mm] Plastic Baffle • Coil spring retention ET70 0 75W R30,
ET700, ET700R ERT708 Large Aperture Open • Coil Spring Retention ET70 0 ET70 0R 120W BR40, 150W R40 Aperture: 5-3/16" [131mm] OD: 8" [203mm] ERT708 High Gloss Appliance White Trim ERT701 Albalite Lens Shower Light • Wet Location listed for use in showers • Torsion spring retention ET70 0 ET70 0R OD: 8" [203mm] ERT701 High Gloss Appliance White Trim with Albalite Lens 60W A19 ERT702 Drop Opal Plastic Lens Shower Light • Wet Location listed for use in showers • Torsion spring retention ET70 0 ET70 0R
ET700, ET700R ERT721 Shower Light with Frosted Glass Lens and Reflector • Torsion springs pull trim tight to ceiling • Wet location listed for use in showers ET70 0 ET70 0R Height: 4-1/4" [108mm] OD: 8" [203mm] ERT721 High Gloss Appliance White Trim with Frosted Glass Lens 60W A19 ERT725 Height: 5-3/8" [136mm] Black Metal Baffle/Splay • Combination baffle/splay trim • Socket Supporting trim • Wide Trim flange hides ceiling cut out irregularities • ERT725TS - Torsion spring retention • ERT725 - Friction
6" Incandescent DIMENSIONS 7-1/2" [199mm] 6-3/4" [171mm] 9-1/2" [241mm] 1/2" [13mm] 13" [330mm] 6-1/2" [165mm] DESCRIPTION EI700U 6" Aperture, IC, New Construction, 120V Line Voltage Specifications • Thermally protected IC housing • Housing may be covered with insulation • For use with 120V incandescent lamps The All-Pro EI700U housing is designed to be used in direct contact with insulation. The IC construction allows an unbroken insulation barrier to be maintained.
EI700U, EI700UAT ERT710 Specular Reflector • Coil Spring retention 75W PAR30, 75W PAR30L, Height: 2-7/8" [73mm] OD: 7-1/4" [184mm] EI70 0U 85W BR30, 90W BR40, 100W R30, E I 7 0 0 U AT 100W R40, 100W PAR38 ERT710 High Gloss Appliance White Trim with Clear Specular Reflector ERT712 White Reflector • Socket supporting trim • ERT712 - Friction clip retention • ERT712TS - Torsion spring retention 60W A19, 75W PAR30, EI70 0U 75W PAR30L, 85W BR30, E I 7 0 0 U AT 100W R30, 120W BR40 ERT712TS Height: 5-3/8"
EI700U, EI700UAT ERT713L Black Metal Baffle • Provides deeper lamp regression • ERT713LTS - Torsion spring retention • ET713L - Friction clip retention EI70 0U 40W A19, 75W PAR30, 75W E I 7 0 0 U AT PAR30L, 85W BR30, 120W BR40 ERT713LTS ERT713L Height: OD: 5-3/8" [136mm] 7-1/4" [184mm] ERT713LTS High Gloss Appliance White Trim with Black Baffle and Torsion Spring Construction ERT714 Plastic Baffle • Coil spring retention Height: 2-1/4" [57mm] OD: 8" [203mm] EI70 0U 65W BR30, 75W PAR30, E I 7 0 0 U AT
EI700U, EI700UAT ERT705 Open • Coil Spring retention • Fixed Socket position Aperture: 3-7/8" [98mm] OD: 8" [203mm] EI70 0U 75W PAR30, 75W PAR30L, E I 7 0 0 U AT 85W BR30, 100W R30 ERT708 ERT705 High Gloss Appliance White Trim Aperture: 5-3/16" [131mm] Large Aperture Open • Coil Spring Retention OD: 8" [203mm] EI70 0U 100W R40 (Requires H1999 E I 7 0 0 U AT Socket Extender) H1999 Socket Extender ERT708 High Gloss Appliance White Trim ERT701 Albalite Glass Lens Shower Light • Wet Location listed f
6" Incandescent DIMENSIONS 5" [127mm] 7-1/2" [191mm] 1/2" [13mm] 6-1/2" [140mm] 10-1/2" [267mm] DESCRIPTION EI2700 6˝ Aperture, IC, Shallow Ceiling, New Construction, 120V Line Voltage Specifications • Thermally protected IC housing • Housing may be covered with insulation • For use with 120V incandescent lamps The EI2700 housing is designed for use in shallow ceilings. The EI2700 is designed for shallow ceilings and direct contact with insulation.
6" Incandescent DIMENSIONS 5" [127mm] 7-1/2" [191mm] 1/2" [13mm] 6-1/2" [140mm] 10-1/2" [267mm] DESCRIPTION The EI2700AT housing is designed for use in shallow ceilings where insulation is present. AIR-TITE design and meets restricted airflow requirements. Housing • Aluminum construction for greater heat dissipation. • AIR-TITE gasket is pre-installed. S o cke t P l a te • Rigid socket plate adjusts and locks without tools for various lamp sizes.
EI2700, EI2700AT, EI2700R ERT710 Specular Reflector • Coil Spring retention EI270 0 E I 2 7 0 0 AT EI270 0R 50W PAR30, 65W BR30, 75W R30, 75W PAR30L Height: 2-7/8" [73mm] OD: 7-1/4" [184mm] ERT710 High Gloss Appliance White Trim with Clear Specular Reflector ERT707 Metal Baffle • Coil spring retention • Narrow and wide trim rings supplied with trim EI270 0 E I 2 7 0 0 AT 50W PAR30, 65W BR30, 75W PAR30L EI270 0R 65W BR30, 75W PAR30L Height: 2-7/8" [73mm] Wide OD: 8" [203mm] Narrow OD: 7-1/4" [184mm]
EI2700, EI2700AT, EI2700R ERT705 Open • Coil Spring retention • Fixed socket position EI270 0 E I 2 7 0 0 AT 50W PAR30L, 60W BR30, 75W PAR30 EI270 0R 60W BR30 Aperture: 3-7/8" [98mm] OD: 8" [203mm] ERT705 High Gloss Appliance White Trim ERT721 Shower Light with Frosted Glass Lens and Reflector • Torsion springs pull trim tight to ceiling • Wet location listed for use in showers EI270 0 E I 2 7 0 0 AT 35W PAR30L EI270 0R 40W A19 Height: 4-1/4" [108mm] OD: 8" [203mm] ERT721 High Gloss Appliance Wh
6" Incandescent DIMENSIONS 5" [127mm] 7-1/2" [191mm] 1/2" [13mm] 6-1/2" [140mm] 10-1/2" [267mm] DESCRIPTION ET2700 6˝ Aperture, Non-IC, Shallow Ceiling, New Construction, 120V Line Voltage Specifications • Non-IC housing • May be used in insulated ceilings but insulation MUST be kept 3" from all sides of fixture • For use with 120V incandescent lamps 112 Note: Some units may have different features. The ET2700 housing is designed for use in shallow ceilings. For use in non-insulated ceilings.
ET2700 ERT710 Specular Reflector • Coil Spring retention ET270 0 Height: 2-7/8" [73mm] OD: 7-1/4" [184mm] 75W PAR30, 75W PAR30L, 85W BR30, 100W R30 ERT710 High Gloss Appliance White Trim with Clear Specular Reflector ERT707 Metal Baffle • Coil spring retention ET270 0 65W BR30, 75W R30, 75W PAR30, 75W PAR30L Height: 2-7/8" [73mm] Wide OD: 8" [203mm] Narrow OD: 7-1/4" [184mm] WIDE TRIM RING NARROW TRIM RING ERT707WHT High Gloss Appliance White Trim with White Baffle ERT714 Plastic Baffle • Coil spr
ET2700 ERT708 Large Aperture Open • Coil spring retention ET270 0 Aperture: 3-7/8" [98mm] OD: 8" [203mm] 120W BR40, 150W R40 ERT708 High Gloss Appliance White Trim ERT701 Albalite Lens Shower Light • Wet Location listed for use in showers ET270 0 OD: 8" [203mm] 60W A19 ERT701 High Gloss Appliance White Trim with Albalite Lens ERT702 Drop Opal Plastic Lens Shower Light • Wet Location listed for use in showers • Torsion spring retention ET270 0 OD: 8" [203mm] ERT702 High Gloss Appliance White Trim
6" Incandescent DIMENSIONS 6-1/2" to 8-3/4" [165 to 222mm] 1/2" [13mm] 10-1/2" [267mm] 5-1/4" [133mm] 6-3/4" [171mm] 14-3/4" [375mm] DESCRIPTION Designed for sloped ceiling installations for ceilings from 2/12 to 6/12 pitch. The socket aiming mechanism allows the lamp to be aimed straight down regardless of ceiling pitch. For use in non-insulated ceilings. If ceiling insulation is present, it must be kept 3 inches from all sides of housing.
6" Incandescent DIMENSIONS 7-1/8" [181mm] 10-1/2" [267mm] 1/2" [13mm] 5-1/4" [133mm] 6-3/4" [171mm] 10" [254mm] 14-3/4" [375mm] DESCRIPTION EI4700 6˝ Aperture, IC, Slope Ceiling, New Construction, 1 2 0 V L i n e Vo l t a g e EI4700AT Designed for sloped ceiling installations for ceilings from 2/12 to 6/12 pitch. The socket aiming mechanism allows the lamp to be aimed straight down regardless of ceiling pitch. For direct contact with insulation.
6" Compact Fluorescent DIMENSIONS Top View 7" [178mm] 1/2" [13mm] 7-1/2" [191mm] 10-1/2" [267mm] 6-1/2" [165mm] EI2072AT DESCRIPTION The EI2072AT is designed for use • Bar hangers may be repositioned 90° on plaster in insulated ceilings and can be in frame direct contact with ceiling • Integral T-bar clip snaps onto insulation. Includes 120V NPF T-bars – no additional clips are electronic compact fluorescent required ballast. AIR-TITE design meets restricted airflow requirements.
6" Compact Fluorescent DIMENSIONS Top View 7" [178mm] 6-7/8" [175mm] 1/2" to 5/8" [13mm to 15.8mm] 13-1/4" [337mm] 6-1/4" [159mm] DESCRIPTION EI2072RAT 6" Aperture, IC, Remodel, AIR-TITE, Compact Fluorescent 26 Watt Compact Fluorescent Specifications • For Use In Insulated Ceilings • For Direct Contact With Insulation • For installation from below the ceiling • Can be used to meet California Title 24 and IECC High Efficacy Requirements 118 Note: Some units may have different features.
EI2072AT, EI2072RAT ERT770 Reflector • Torsion springs pull trim tight to ceiling • Self flanged trim ring • Gloss White trim ring Height: 5-3/8" [136mm] OD: 7-1/4" [184mm] ERT770MTS Gloss White Trim ring, Matte Haze Reflector E I 2 0 7 2 AT 26W DTT or 26W TTT 4-pin EI2072RAT Compact Fluorescent lamp* * DTT - Double Twin (Quad) Tube TTT - Triple Twin Tube ERT770TS Gloss White Trim Ring, Clear Specular Reflector ERT771 Reflector • Torsion springs pull trim tight to ceiling • Self flanged trim ring • Gloss Wh
Commercial Downlighting 6 Commercial Available 1st Quarter 2 1 5 3 1. No Fuss Bar Hangers™ • Pre-installed and centered bar hangers • Bars lock to tee grid with a screwdriver or pliers • Centering marks on the bar hanger mechanism allow consistent positioning of fixtures 2012 4 5. Junction Box • (4) 1/2" and (2) 3/4" trade size pry outs positioned to allow straight conduit runs • Listed for feed through branch wiring. 2. Adjustable Mounting Brackets 6.
4" PAR Directional 4" and 6" PAR Directional 9.126" [231.80mm] 11.062" [280.97mm] 4.438" I.D. [112.71mm] 5.313" [134.94mm] 13.062" [331.77mm] 5.813" O.D. [147.64mm] PA4 15.067" [382.69mm] 4" PAR Directional Accepts 75W Max. PAR16 / PAR20 / PAR30S Tungsten-Halogen and Integrated PAR CMH* and PAR LED* lamps PA6 SAMPLE NUMBER: PA4 4AC O r d e r h o u s i n g , r e fl e c t o r a n d l a m p s e p a r a t e l y f o r a c o m p l e t e l u m i n a i r e .
6" Horizontal Compact Fluorescent Horizontal 6" Compact Fluorescent Emergency Option 5.795" [147.19mm] 4.816" [122.32mm] 6.375" I.D. [161.93mm] 7.250" [184.15mm] 6.375" I.D. [161.93mm] 7.250" [184.15mm] 7.750" O.D [196.85mm] PD6H142 7.750" O.D [196.85mm] 26.400" [670.56mm] 26.400" [670.56mm] 6" Horizontal Downlight • Boat-shaped galvanized steel frame with a preset 1/2" plaster lip that adjusts to accommodate ceilings up to 2" thick. 7.432" [188.
6" Horizontal Compact Fluorescent Horizontal 6" Compact Fluorescent Emergency Option 5.795" [147.19mm] 4.816" [122.32mm] 6.375" I.D. [161.93mm] 7.250" [184.15mm] 6.375" I.D. [161.93mm] 7.250" [184.15mm] 7.750" O.D [196.85mm] 7.750" O.D [196.85mm] 26.400" [670.56mm] 26.400" [670.56mm] PD6H226 6" Horizontal Downlight 7.432" [188.77mm] 7.432" [188.77mm] 13.350" [339.09mm] • May be used for new construction or remodeling installations. 13.109" [332.98mm] 13.109" [332.
6" Vertical Compact Fluorescent Vertical 6" Compact Fluorescent Emergency Option 8.887" [225.73mm] 8.887" [225.73mm] 6.375" I.D. [161.93mm] 7.250" [184.15mm] PD6V142 7.750" O.D [196.85mm] 26.400" [670.56mm] 6" Vertical Downlight • Boat-shaped galvanized steel frame with a preset 1/2" plaster lip that adjusts to accommodate ceilings up to 2" thick. 7.432" [188.77mm] • May be used for new construction or remodeling installations.
6" Vertical Incandescent and Integrated PAR Lamps Vertical 6" Incandescent and Integrated PAR Lamps 8.887" [225.73mm] 6.375" I.D. [161.93mm] PD6V120 7.250" [184.15mm] 7.750" O.D [196.85mm] 6" Vertical Downlight 26.400" [670.56mm] • Boat-shaped galvanized steel frame with a preset 1/2" plaster lip that adjusts to accommodate ceilings up to 2" thick. 7.432" [188.77mm] • May be used for new construction or remodeling installations.
6" Vertical Metal Halide Vertical 6" Metal Halide 8.887" [225.73mm] 6.375" I.D. [161.93mm] PD6V100E 7.250" [184.15mm] 6" Vertical Downlight 7.750" O.D [196.85mm] 26.400" [670.56mm] • Boat-shaped galvanized steel frame with a preset 1/2" plaster lip that adjusts to accommodate ceilings up to 2" thick. 7.432" [188.77mm] • May be used for new construction or remodeling installations. • Pre-installed and pre-centered No Fuss Bar Hangers™, or use with 1/2" EMT.
8" Horizontal Compact Fluorescent Horizontal 8" Compact Fluorescent 5.850" [148.59 mm] 8.375" I.D. [212.73mm] 9.250" [234.95mm] 9.750" O.D [247.65mm] PD8H142 26.400" [670.56mm] 8" Downlight • Boat-shaped galvanized steel frame with a preset 1/2" plaster lip that adjusts to accommodate ceilings up to 2" thick. 9.472" [240.59mm] • May be used for new construction or remodeling installations. • Pre-installed and pre-centered No Fuss Bar Hangers™, or use with 1/2" EMT. 16.181" [410.
8" Horizontal Compact Fluorescent Horizontal 8" Compact Fluorescent 5.850" [148.59 mm] 8.375" I.D. [212.73mm] 9.250" [234.95mm] 9.750" O.D [247.65mm] PD8H242 26.400" [670.56mm] 8" Downlight • Boat-shaped galvanized steel frame with a preset 1/2" plaster lip that adjusts to accommodate ceilings up to 2" thick. 9.472" [240.59mm] • May be used for new construction or remodeling installations. • Pre-installed and pre-centered No Fuss Bar Hangers™, or use with 1/2" EMT.
8" Vertical Compact Fluorescent Vertical 8" Compact Fluorescent 9.319" [236.70mm] 8.375" I.D. [212.73mm] PD8V142 9.250" [234.95mm] 8" Downlight 9.750" O.D [247.65mm] 26.400" [670.56mm] • Boat-shaped galvanized steel frame with a preset 1/2" plaster lip that adjusts to accommodate ceilings up to 2" thick. 9.472" [240.59mm] • May be used for new construction or remodeling installations. • Pre-installed and pre-centered No Fuss Bar Hangers™, or use with 1/2" EMT. 16.181" [410.
8" Vertical Incandescent and Integrated PAR Lamps Vertical 8" Incandescent and Integrated PAR Lamps 9.376" [238.16mm] 8.375" I.D. [212.73mm] PD8V120 9.250" [234.95mm] 9.750" O.D [247.65mm] 8" Downlight 26.400" [670.56mm] • Boat-shaped galvanized steel frame with a preset 1/2" plaster lip that adjusts to accommodate ceilings up to 2" thick. 9.472" [240.59mm] • May be used for new construction or remodeling installations. • Pre-installed and pre-centered No Fuss Bar Hangers™, or use with 1/2" EMT.
131
CONSUMER PRODUCTS LED Worklights LED Worklights Cooper Lighting’s LED Worklights are great tools to have around your house, garage, workshop or automobile. We offer several multi-functional worklights for handling almost any type of project or job.
CONSUMER PRODUCTS LED Worklights RECHARGEABLE LED Worklight Applications • Home • Garage • Recreation • Automotive Rechargeable Folding LED Worklight Specifications • Eighty long-life LED lights Camo closed view • Cordless rechargeable unit with AC and DC charging adapters included • Durable polycarbonate lens • Nylon swivel hook • Easy-grip cushioned handle • Convenient ON/OFF switch • Reflective strips for increased visibility during roadside applications • Integrated neodymium magnets for securin
CONSUMER PRODUCTS LED Worklights RECHARGEABLE LED Worklight Applications • Home • Garage • Recreation • Automotive Rechargeable LED Worklight Specifications • Thirty-five long-life LED lights • Cordless rechargeable unit with AC and DC charging adapters included The worklight doubles as a flashlight • Nine LED lights on the end of light double as a spotlight or flashlight • Durable plastic construction with polycarbonate lens • 360° rotating swivel hook • Cushioned grip with convenient instant-ON swi
CONSUMER PRODUCTS Worklights Halogen Worklights Strength and durability, safety and portability. That’s what you get with the Cooper Lighting Halogen Worklight line. Our tough line of Worklights offer many innovative design features to meet any challenge while working in the field.
CONSUMER PRODUCTS Worklights TRIPOD & SLED Quartz Worklight Applications • Temporary • Warehouse 1000 Watt Halogen Standlight Specifications • Tri-pod stand with non-skid feet adjusts up to 72" • Quick disconnect feature for easy release from stand • Weatherproof ON/OFF switch 500W Halogen Bulb • Stand collapses within sled for compact storage • Heavy-duty wire grill guard and tempered glass for added safety Quick Disconnect • 6', 18-gauge, 3-prong grounded power cord with wrap Portable sled desig
CONSUMER PRODUCTS Worklights PORTABLE Quartz Worklight 600 Watt Halogen Worklight Applications • Temporary • Warehouse Specifications • Ratcheting head to easily adjust light angle 300W Halogen Bulb • Thermal switch turns unit off if fixture becomes too hot • Weatherproof HI/LO switch for adjustable light control • Light output (wattage) 300/600/OFF Ratcheting Head • Heavy-duty wire grill guard and tempered glass for added safety • Comfortable foam grip handle • Die-cast aluminum housing • 3', 18-gau
CONSUMER PRODUCTS Worklights PORTABLE Quartz Worklight 250 Watt Halogen 4-In-1 Worklight Applications • Temporary • Warehouse Specifications • 4-in-1 includes hook, clamp spike and base • Weatherproof ON/OFF switch 250W Halogen Bulb • Heavy-duty wire grill guard and tempered glass for added safety • Die-cast aluminum housing • 3', 18-gauge, 3-prong grounded power cord Includes hook, clamp and spike • 250 watt halogen bulb Master Carton Info Unit Carton info Model # PQS2504IN1 Description 250W Hal
CONSUMER PRODUCTS Motion Activated Precision Plus Doppler Radar TM While motion sensor lighting has been used for two decades, Precision Plus Doppler Radar™ elevates these systems to a new dimension. It protects your home with improved reliability, area coverage and stable performance. How It Works? For the past two decades, motion sensor lighting has relied on PIR which detects heat from moving objects, such as people, animals and cars.
CONSUMER PRODUCTS Motion Activated MOTION SENSOR Applications 270º Motion Sensor - 200 Watt Halogen Motion Security Floodlight • Home • Garage • Wall / Eave • Pathway • Security Specifications • Motion sensor detects 270° up to 90' • Convenient, adjustable friction swivel heads • Heavy-duty, die-cast metal rectangular twin-head design 240 100W Halogen Bulb • Adjustable “Sensitivity” setting • Integral photo cell design prevents lights from turning ON with motion during daylight hours (auto mode) 270°
CONSUMER PRODUCTS Motion Activated MOTION SENSOR Applications • Home • Garage • Wall / Eave • Pathway • Security 180º Motion Sensor - 200 Watt Halogen Motion Security Floodlight Specifications • Motion sensor detects motion 180° up to 70' • Die-cast metal housing • Easy adjustable heads • Adjustable “sensitivity” setting 100W PAR Bulb • Requires two 100W (MAX) PAR bulbs (sold separately) 180° Area of Coverage Master Carton Info Unit Carton info Model # MS185D MS185DW Description 180° 200W PAR Halo
CONSUMER PRODUCTS Motion Activated MOTION SENSOR Applications • Home • Garage • Wall / Eave • Pathway • Security Specifications 240º Motion Sensor - 300 Watt Security Floodlight with Lamp Covers • Motion sensor detects motion 180° up to 70' • Heavy-duty, die-cast metal housing • Metal lamp covers provide maximum bulb protection • Motion sensor turns lights on automatically when motion is detected and OFF after a preselected time delay (4 or 12 minutes) • Integral photo cell design prevents lights from t
CONSUMER PRODUCTS Motion Activated MOTION SENSOR Applications • Home • Garage • Wall / Eave • Pathway • Security 180º Motion Sensor - 300 Watt Security Halogen Floodlight Specifications • Motion sensor detects motion 180° up to 70' • Heavy-duty, die-cast metal housing 300W Halogen Bulb • Motion sensor turns light ON automatically when motion is detected and OFF after a preselected time delay (4 or 12 minutes) • Integral photo cell design prevents lights from turning ON with motion during daylight hour
CONSUMER PRODUCTS Motion Activated MOTION SENSOR 110º Motion Sensor - 150 Watt Security Halogen Floodlight Applications • Home • Garage • Wall / Eave • Pathway • Security Specifications • Motion sensor detects motion 110° up to 70' • Heavy-duty, die-cast metal housing • Motion sensor turns lights ON automatically when motion is detected and OFF after a preselected time delay (4 or 12 minutes) • Power outage protection saves energy by automatically resetting at dawn if lights are triggered by power interr
CONSUMER PRODUCTS Motion Activated MOTION SENSOR 110º Motion Sensor - 100 Watt Security Camera & Floodlight System Applications • Home • Garage • Business • Entrance • Pathway • Security Specifications • Motion sensor detects motion 110° up to 40' • 24-hour surveillance of home or business with color images and built-in microphone • Delivers audio and video through TV • Video signal can be recorded (recording device sold separately) • Wireless technology – no cable required for camera to communicate with
CONSUMER PRODUCTS Motion Activated Solar Powered LED MOTION SENSOR Applications • Carports • Posts • Sheds • Pathway • Security Specifications • Motion sensor detects motion 100° up to 23' 100º Motion Sensor - Solar Powered LED Light • Durable weather resistant plastic construction • Installs easily with no wiring necessary • Built-in solar panel • Includes (3) NI-MH rechargeable “AA” batteries • Motion sensor turns light ON automatically at night when motion is detected • Light sensor prevents light
CONSUMER PRODUCTS Motion Activated LAMPHOLDERS Twin Floodlights 200 Watt Twin Head Halogen Floodlight Applications • Home • Garage • Wall / Eave • Pathway • Security Specifications • Heavy-duty, die-cast metal construction 100W GY8.6 Halogen Bulb • Decorative floodlight with twin head design • Perfect for wall or eave mount applications 3 1/8" (79mm) 5" (127mm) • Two 100W (MAX) GY8.
CONSUMER PRODUCTS Quartz Floodlights MINI QUARTZ Single & Twin Floodlights 300 Watt Compact Twin Head Halogen Floodlight Applications • Home • Garage • Wall / Eave • Pathway • Security Specifications • Heavy-duty die-cast metal construction • Twin head design • Perfect for wall or eave mount applications 150W Halogen Bulb 13 1/2" (343mm) • Two 150W (MAX) halogen bulbs (included) 3 7/8" (98mm) 6 1/2" (165mm) 5 5/8" (143mm) Master Carton Info Unit Carton info Model # TMQ150 TMQ150W Description 300
CONSUMER PRODUCTS Dusk-to-Dawn 149
CONSUMER PRODUCTS Dusk-to-Dawn Dusk-to-Dawn Entry and Patio Luminaire 42 Watt Fluorescent Entry and Patio Light Applications • Patio • Entrance • Porch • Pathway • Security Specifications • Heavy-duty, die-cast metal housing • Nighttime ON/Daytime OFF -15º F Starting 42W Fluorescent Bulb (B42FMED) Temperature • Built-in light photo control • Easily mounts to standard lampholder mounting plate • Perfect for lighting porches, decks or work areas • 42W (MAX) medium base fluorescent bulb (included) Ma
CONSUMER PRODUCTS Dusk-to-Dawn Dusk-to-Dawn Twin Head Halogen Floodlight 300 Watt Metal Twin Head Halogen Floodlight With Photo Control Applications • Home • Garage • Wall / Eave • Pathway • Security Specifications • Heavy-duty, die-cast metal housing • Nighttime ON/Daytime OFF 150W PAR Bulb • Built-in photo control • Perfect for wall or eave mount applications • Two 150W (MAX) PAR bulbs (sold separately) Master Carton Info Unit Carton info Model # MT250PCW Description 300W PAR - White UPC Dimensi
CONSUMER PRODUCTS Dusk-to-Dawn Dusk-to-Dawn Entry and Patio Luminaire 26 Watt Fluorescent Floodlight Applications • Home • Garage • Wall / Eave • Pathway • Security Specifications • High impact, weather resistant housing and lens • Nighttime ON/Daytime OFF • Built-in photo control 18W/26W 4 Pin Fluorescent Bulb (FML18/FML26) • Electronic ballast design provides reliable starting in cold weather applications • Perfect for wall or eave mount application • Available in 26W (MAX) 4 Pin Fluorescent bulbs
CONSUMER PRODUCTS Dusk-to-Dawn Dusk-to-Dawn Entry and Patio Luminaire 23 Watt GU24 Fluorescent Patio Light Applications • Patio • Entrance • Porch • Pathway • Security Specifications • Frosted high-impact protective lens • Self diagnostic LED (Title 24) indicator light • Will accept 13W-27W GU24 bulb 23 Watt GU24 D2D Fluorescent Bulb • Fluorescent bulb lasts 5 times longer than standard incandescent bulbs • Photo control provides convenient nighttime ON/daytime OFF • Heavy duty die-cast aluminum housi
Index Product No. ...................................Page No. 2EP3GAVX .................................................47 12T8WHU ..................................................63 12X9WHU ..................................................63 2EP3GX .....................................................47 2GR8 .........................................................48 4AC .........................................................121 60VC .......................................124, 125, 126 60VWWC .........
Index Product No. ...................................Page No. LED130 ...................................................133 LED130C .................................................133 LP10C........................................................16 LP10G .......................................................16 LP70C........................................................16 LP70G .......................................................16 LS10G .......................................................16 LS15G .
Cooper Lighting, LLC Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 International Sales, USA Cooper Lighting, LLC 1121 Highway 74 South Peachtree City, GA 30269 P: 770-486-4800 F: 770-486-4801 P: 770-486-4800 F: 770-486-4801 www.cooperlighting.
