Specifications

SMD6 Series
HALO
HOUSING COMPATIBILITY
The SMD6 is UL Certified in Halo recessed housings and for use with any 5 or 6 inch diameter recessed housing constructed of steel or aluminum with an internal volume
that exceeds 107.9 in3 in addition to those noted below. Note: Some other’s housings require installation with included friction clips.
JUNCTION BOX COMPATIBILITY
*Note: SMD 120-277V UNV configuration is only compatible with junction boxes that provide a minimum depth of 2-1/8”. Junction boxes meeting these requirements
listed below.
Compatible Halo LED Housings with LED luminaire connector
(high-efficacy compliant)
HALO
LED
Recessed
Can Size
Catalog Number
5"
H550ICAT, H550RICAT, E550ICAT,
E550RICAT
6"
H750ICAT, H750RICAT, H750T,
H750RINTD010, H750TCP, H2750ICAT,
H2750RICAT, E750ICAT, E750RICAT
Halo LED Retrofit Enclosures
HALO 6"
ML7BXRFK, ML7E26RFK
Compatible Halo Incandescent E26 Screwbase Housings
HALO
5"
H5ICAT, H5RICAT, H5ICATNB,
H5T, H5RT, H25ICAT, H25ICATNB,
E5TAT, E5RTAT, H5TNB,
E5TATNB, E5ICAT, E5RICAT,
E5ICATNB
6"
H7ICAT, H7RICAT, H7ICT, H7RICT,
H7ICATNB, H7ICTNB, H7T,
H7RT, H7TNB, H7TCP, H7UICT,
H7UICAT, H27ICAT, H27RICAT,
H27T, H27RT, E7ICAT, E7RICAT,
E27ICAT, E27RICAT, E7ICATNB,
E7TAT, E7RTAT, E7TATNB,
E27TAT, E27RTAT
4" square deep steel box*
4" x 4" x 2-1/8"
(102mm x 102mm x
54mm)
OTHER’S JUNCTION BOXES*
EATON’S CROUSE-HINDS JUNCTION BOXES
4" octagon light fixture/fan steel box*
4" x 4" x 2-1/8"
(102mm x 102mm x 54mm)
• TP316 - for non-metallic cable
• TP317 - for metal clad cable
• UL Listed
• Refer to www.crouse-hinds.com
TP316*
for non-metallic cable
4” x 4” x 2-1/8”
(102mm x 102mm x 54mm)
TP317*
for metal clad cable
4” x 4” x 2-1/8”
(102mm x 102mm x 54mm)
4" square standard steel box
4" x 4" x 1-1/2"
(102mm x 102mm x 38mm)
4" octagon steel box
4" x 4" x 1-1/2"
(102mm x 102mm x 38mm)
3-1/2" round old work*
non-metallic box
4-1/4" O.D. flange, 3-1/2" I.D. x 2-5/8”
(108mm O.D., 89mm I.D. x 67mm)
4" round new work non-metallic
light fixture/fan box*
4" diameter x 2-3/16"
(102mm x 56mm)
3-1/2" round new work
non-metallic ceiling box*
3-1/2" diameter x 2-3/4"
(89mm x 70mm)
4” round surface mount box
4" diameter x 1-1/2”
(102mm x 38mm)
Requires SLD6RAD adapter
*This is a representative list of compatible junction boxes only.
Information contained in this literature about other manufacturers’
products is from published information made available by the
manufacturer and is deemed to be reliable, but has not been verified.
Eaton makes no specific recommendation on product selection and
there are no warranties of performance or compatibility implied.
Installer must determine that site conditions are suitable to allow
proper installation of the mounting bracket in the box.
4" round new work non-metallic box
with hanger bar assembly
4" diameter x 2-3/16" (102mm x 56mm)