Specifications

Dimming and occupancy
Minimize power consumption, maximize energy savings
To further enhance energy savings, lighting management and control can reduce power consumption and energy costs by
providing the appropriate light levels at the right place and time when required. Lighting can be reduced during low usage hours,
saving energy, then raised on demand with occupancy detection. Adding motion sensor and dimming controls capabilities also
extends the life of the luminaire due to reductions in electrical load and case temperatures on the LEDs and drivers. The Prevail
LED area and site luminaires control options are designed to be simple and cost-effective ASHRAE and California Title 24
compliant solutions.
On/off or bi-level motion sensor (MSP)
The Prevail LED area and site luminaires integrated dimming and occupancy sensor is a standalone control option that can
automatically dim the luminaire to 50 percent with a time delay of 10 minutes if no occupancy is detected. When activity is
detected, the luminaire returns to full light output. This option is available in 12' - 30' mounting heights in on/off operation or
bi-level operation. To change these settings, a hand held programmable remote can be purchased that allows the dimming level,
sensitivity and time delay settings to be adjusted.
Area/site applications
For outdoor area/site applications, lighting should be
dimmed or turned off according to pedestrian traffic and
safety requirements. Scheduled dimming and occupancy
detection can be combined to reduce maximum lighting
levels outside business hours. Upon occupancy detection,
the luminaire returns to full lighting to maintain security
lighting levels.
Worry-free controls planning
Ensure complete coverage and
performance with an integrated senor
system built into every luminaire based
on fixture mounting height. The integrated
sensor is available in mounting heights
from 12' to 30'.
Coverage To p Area (Feet)
0
20
30
10
10
20
30
0
Coverage Side Area (Feet)
Side View
To p View
Recommended Mounting Height 0-30 feet.
0
10 20 30 4010123040
30
Integrated design
With a single product to mount, and a
single electrical connection to make, the
Prevail luminaire with an integrated
sensor system saves money on the total
installed cost when occupancy and
daylight dimming controls are needed.
Sensor remote control
When the application demands more, the
sensor system has the option to make
changes using a remote control. The
remote allows changes from the default
settings for occupied/unoccupied, target
light level, and time outs.
EATON Prevail LED area, site and roadway luminaire
7