Specifications

Ordering information
Dimensions
Sample Number: PRV-A25-D-UNV-T3-SA-BZ
Product Family
1, 2
Light Engine
3
Driver
4
Voltage Distribution Mounting Color
6
PRV=Prevail A15=(1 LED) 6,100 Nominal Lumens
A25=(2 LEDs) 10,200 Nominal Lumens
A40=(2 LEDs) 15,100 Nominal Lumens
A60=(2 LEDs) 18,900 Nominal Lumens
D= Dimming (0-10V) UNV= Universal
(120-277V)
347=347V
480=480V
5
T2=Type II
T3=Type III
T4=Type IV
T5=Type V
SA=Standard Versatile Arm
MA=Mast Arm
WM=Wall Mount Arm
AP= Grey
BZ= Bronze (Standard)
BK=Black
DP=Dark Platinum
GM=Graphite Metallic
WH=White
Options (Add as Suffix) Accessories (Order Separately)
11
7030=70 CRI / 3000K CCT
7
7050=70 CRI / 5000K CCT
7
10K=10kV/10kA UL 1449 Fused Surge Protective Device
LWR-LW=LumaWatt Pro Wireless Sensor, Wide Lens for 8' - 16' Mounting Height
8, 9
LWR-LN=LumaWatt Pro Wireless Sensor, Narrow Lens for 16' - 40' Mounting Height
8, 9
MSP/DIM-L12=Integrated Sensor for Dimming Operation, 8' - 12' Mounting Height
MSP/DIM-L30=Integrated Sensor for Dimming Operation, 12' - 30' Mounting Height
MSP-L12=Integrated Sensor for ON/OFF Operation, 8' - 12' Mounting Height
MSP-L30=Integrated Sensor for ON/OFF Operation, 12' - 30' Mounting Height
PER=NEMA 3-PIN Twistlock Photocontrol Receptacle
10
PER7=NEMA 7-PIN Twistlock Photocontrol Receptacle
10
HSS=House Side Shield
HA=50°C High Ambient Temperature
PRVWM-XX=Wall Mount Kit
PRVMA-XX=Mast Arm Mounting Kit
PRVSA-XX=Standard Versatile Mounting Kit
HS/VERD=House Side Shield
MA1010-XX=Single Tenon Adapter for 3-1/2" O.D. Tenon
MA1011-XX=2@180° Tenon Adapter for 3-1/2" O.D. Tenon
MA1012-XX=3@120° Tenon Adapter for 3-1/2" O.D. Tenon
MA1013-XX=4@90° Tenon Adapter for 3-1/2" O.D. Tenon
MA1014-XX=2@90° Tenon Adapter for 3-1/2" O.D. Tenon
MA1015-XX=2@120° Tenon Adapter for 3-1/2" O.D. Tenon
MA1016-XX=3@90° Tenon Adapter for 3-1/2" O.D. Tenon
MA1017-XX=Single Tenon Adapter for 2-3/8" O.D. Tenon
MA1018-XX=2@180° Tenon Adapter for 2-3/8" O.D. Tenon
MA1019-XX=3@120° Tenon Adapter for 2-3/8" O.D. Tenon
MA1045-XX=4@90° Tenon Adapter for 2-3/8" O.D. Tenon
MA1048-XX=2@90° Tenon Adapter for 2-3/8" O.D. Tenon
MA1049-XX=3@90° Tenon Adapter for 2-3/8" O.D. Tenon
MA1191-XX=2@120° Tenon Adapter for 2-3/8" O.D. Tenon
OA/RA1013=Photocontrol Shorting Cap
OA/RA1014=NEMA Photocontrol - 120V
OA/RA1016=NEMA Photocontrol - Multi-Tap 105-285V
OA/RA1027=NEMA Photocontrol - 480V
OA/RA1201=NEMA Photocontrol - 347V
ISHH-01=Integrated Sensor Programming Remote
NOTES: 1 Customer is responsible for engineering analysis to confirm pole and fixture compatibility for all applications. Refer to installation instructions IB500002EN and pole white paper WP513001EN for additional
support information. 2 DesignLights Consortium
®
Qualified and classified for DLC Standard, refer to www.designlights.org for details. 3 Standard 4000K CCT and 70 CRI. 4 Consult factory for driver surge protection
values. 5 Only for use with 480V Wye systems. Per NEC, not for use with ungrounded systems, impedance grounded systems or corner grounded systems (commonly known as Three Phase Three Wire Delta, Three
Phase High Leg Delta and Three Phase Corner Grounded Delta systems). 6 Different housing colors impact lumen output. IES files for the non-standard colors are available upon request. 7 Extended lead times apply.
Use dedicated IES files for 3000K and 5000K when performing layouts. These files are published on the Prevail luminaire product page on the website. 8 LumaWatt Pro wireless sensors are factory installed and require
network components LWP-EM-1, LWP-GW-1, and LWP-PoE8 in appropriate quantities. See website for LumaWatt application information. 9 LumaWatt Pro wireless system is not available with photocontrol receptacle
(Not needed). 10 Not available with MSP or LWR options. 11 Replace XX with paint color.
Stock Sample Number: PRVS-A25-UNV-T3
Product Family Light Engine Voltage Distribution Options (Add as Suffix)
PRVS= Prevail
Stock
A15=(1 LED) 6,100 Nominal Lumens
A25=(2 LEDs) 10,200 Nominal Lumens
A40=(2 LEDs) 15,100 Nominal Lumens
A60=(2 LEDs) 18,900 Nominal Lumens
UNV= Universal (120-277V)
347=347V
T3=Type III
T4=Type IV
MSP/DIM-L30= Integrated Sensor for Dimming Operation,
Maximum 30' Mounting Height
NOTE: Bronze only, 4000K CCT, 120-277V, 347V, standard mounting arm, standard non-fused 10kV MOV and 0-10V dimming.
13-15/16" [354mm]
26-13/16" [681mm]
2-3/4"
[70mm]
NOTE: Specifications and dimensions subject to change without notice.
4-15/16"
[125mm]
3-3/4"
[96mm]
6-15/16"
[177mm]
4"
[102mm]
4-7/8"
[1
24mm]
1
-1/4" [32mm]
9/16"
[15mm]
Dia. Hole
6"
[153mm]
3-1/4"
[83mm]
2-1/2"
[64mm]
O.D.
6"
[152mm]
2-3/8"
[60mm]
8"
[203mm]
7-1/8"
[181mm]
7/16"
[12mm]
Dia. Hole
5-1/8"
[130mm]
Versatile Pole Mount Arm
Mast Arm Mount
Wall Mount Arm
Additional Information
Compliances Technical Data (Electronic Driver)
UL and cUL Wet Location Listed
IP66-Rated Optics and Fixture
3G Vibration Rated per ANSI C136.31
ISO 9001
DesignLights Consortium
®
Qualified
1
+40°C (104°F) Ambient Temperature Rating
-40°C (-40°F) Ambient Temperature Rating
>0.9 Power Factor
<20% Total Harmonic Distortion
120-277V 50/60Hz
347V 60Hz, 480V 60Hz
2
EPA (Effective Projected Area -
Square Feet)
Shipping Data
(Approximate Net Weight)
0.75 20 lbs. (9.09 kgs.)
NOTES: 1 DesignLights Consortium
®
Qualified and classified for DLC Standard, refer to
www.designlights.org for details. 2 480V is compatible for use with 480V Wye systems only.
EATON Prevail LED area, site and roadway luminaire
10