Specifications

ADV141506
6/17/2014
Catalog #
Project
Comments
Prepared by
Type
Date
HALO LED ICAT SHALLOW HOUSING for
NEW CONSTRUCTION
The H2750ICAT is a dedicated LED new construction housing for
use in shallow ceilings where 2x6 joist construction is used.The
H2750ICAT is designed to fit in shallow insulated ceilings and can
be in direct contact with ceiling insulation*. This AIR-TITE housing
design prevents airflow between conditioned and unconditioned
spaces for savings on both heating and air conditioning costs. The
LED connector system provides high efficacy code compliance
when used with designated HALO LED modules and trims.
Housings
• Aluminumhousingfor
greater heat dissipation.
H2750ICAT housing is gasketed
to prevent airflow from heated
or air conditioned spaces
Plaster Frame
• Galvanizedsteelframe.Housing
adjusts in plaster frame to
accommodate up to 1-3/8”
ceiling thickness.
• Regressedlockingscrewfor
securing hanger bars.
• Cutoutsincludedforeasily
crimping hanger bars in position.
Slide-N-Side™ Junction Box
• Positionedtoaccommodate
straight conduit runs.
• Seven½”tradesizeconduit
knockouts with true pry-out
slots.
• Slide-N-Sidewiretrapsallow
non metallic sheathed cable to
be installed without tools and
without removing knockouts.
• Allowswiringconnectionsto
be made outside the box.
• Simplyinsertthecabledirectly
into the trap after connections
are made.
• Accommodatesthefollowing
standard non-metallic
sheathed cable type:
• U.S.#14/2,#14/3,#12/2,#12/3
• Canada:#14/2,#14/3,#12/2
GOT NAIL! Pass -N-Thru™
Bar Hangers
Bar Hanger features include
• Pre-installednaileasilyinstalls
 inregularlumber,engineered
lumber and laminated beams.
• SafetyandGuidancesystem
 preventssnagging,ensures
 smooth,straightnail
penetration and allows bar
hangers to be easily removed
if necessary
• Automaticlevelingflange
aligns the housing and allows
holding the housing in place
with one hand while driving
nails.
• Housingcanbepositionedat
any point within 24” joist
spans
• Scorelinesallowtool-free
shortening for 12” joists and
bar hangers do not need to be
removed for shortening.
• Barhangersmaybe
repositioned 90° on plaster
frame
• IntegralT-barclipsnapsonto
T-bars – no additional clips are
required.
LED Module Connection
Halo shallow LED modules simply
install with a plug-in 120V/277V
rated line voltage wiring connector
(ULandCSAListedLuminaire
Disconnect).
This non-screw-base connection
preserves the high efficacy rating
and prevents use of low effi-
cacy incandescent sources (see
LED Module specifications).
Caution
LED connection is rated for 120V
and 277V input. Installer must
verify LED module voltage is
compatible with the applicable
voltageinput.Ifuncertain,consult
a qualified electrician.
Labels
• UL/cULListed1598Luminaire
• CEMarking-“Conformité
 Européene”conformitywith
the Council of European
 CommunitiesDirectives, 
meeting internationally
 recognizedcompliancewhen
 usedwithML56SeriesLED
modules
• UL/cULListedforFeedThrough
• UL/cULListedforDampLocation
• UL/cULListedforWetLocation
with select trims
• UL/cULListedfrodirectcontact
with insulation and combustible
material*
• Ratedfor20Wmaximum
Qualification
May be used with qualified Halo
LED modules and designated
trims for High Efficacy Luminaire
Compliance:
• StateofCaliforniaTitle24
• InternationalEnergy 
Conservation Code (IECC)
• WashingtonStateEnergyCode
• NewYorkStateEnergy
Conservation Construction Code
- AIR-TITE™ Compliant
• CertifiedunderASTM-E283
standard for air-tight
construction
DESIGN FEATURES
H2750ICAT
6” New Construction
IC AIR-TITE™ Housing
For
Designated Halo
LED Modules and Trims
-RA56 Series
-RL56 Series
-ML56 Series
High Efficacy LED Housing
HALO
®
FOR USE IN
INSULATED CEILINGS
FOR DIRECT CONTACT
WITH INSULATION*
FOR USE IN
SHALLOW CEILINGS
6-1/2"
[165mm]
1/2"
[13mm]
5"
[127mm]
7-1/2"
[191mm]
10-1/2"
[267mm]
*Nottobeusedindirectcontactwithsprayfoaminsulation.
Can be used with
Qualified and compliant with
select trims. Refer to ENERGY
STAR
®
Qualified Products
List and CEC (T24) Appliance
Database for listings.