Installation Instructions

User Manual: WaveLinx Lite (1.5)

www.cooperlighting.com

Repeat this process, moving into Bluetooth range (within 60 feet) and refreshing the scan to pull in the new devices.

Note 1: Device configuration will be retained during a firmware update.

Note 2: Devices will remain in the last commanded state during the firmware update, re-evaluating after the firmware update is complete. If device

contains an occupancy sensor, the occupancy sensor may issue an occupied command when device resets. If the area is not occupied, the device will

follow its programmed hold time sequence to enter the unoccupied state.

Note 3: If a firmware update fails to complete, the device will remain operational with the original device firmware.

Update the Mobile Application

Updates to the WaveLinx Lite Mobile App will be performed per the user’s preference settings on each mobile device. If not updated

automatically, updates may be installed manually from the updates section on the App Store or on Google Play.

The current App version can be viewed by accessing the Menu’s ‘About’ section. For in detail information, select the ‘App Info’ option.

Refresh scan to

verify firmware

version

Version Info

Tap ‘App Info’ for

more details