Installation Instructions

User Manual: WaveLinx Lite (1.5)
www.cooperlighting.com
29
Modify Default Behavior After Provisioning
Once an area has been defined, the default behavior can be modified if different operation is expected. This section discusses how to:
• Modify areas
• Modify zones
• Modify devices
• Modify occupancy sets
• Modify wallstations
• Modify scene light levels
• Calibrate daylight sets
Modify Areas
Once created, areas can be renamed or deleted. This section discusses how to perform these functions.
Rename an Area
An area can be renamed at any time. This process does not require connection to the internet or a connection to the WaveLinx Lite
device/network.
To rename an area:
1: Open the WaveLinx Lite Mobile Application.
2: In the site list, select a site.
3: In the area list or in an area’s screen, select the pencil icon ‘ ’.
4: Change the area name, and then tap ‘Update’.
Select the site
Select the edit
icon
Update name
with changes
Tap ‘Update’